Difference between revisions of "Getting Started/Build/Windows/emerge"

Jump to: navigation, search
(warn about msys-git in your path)
(What emerge does)
 
(22 intermediate revisions by 7 users not shown)
Line 3: Line 3:
 
== Introduction ==
 
== Introduction ==
 
Emerge is a tool that can build the different parts of KDE and its dependencies under Windows. We created this tool to automate and simplify the build process under Windows. We try to build all packages that we offer in the KDE installer with emerge. That has some advantages for us:
 
Emerge is a tool that can build the different parts of KDE and its dependencies under Windows. We created this tool to automate and simplify the build process under Windows. We try to build all packages that we offer in the KDE installer with emerge. That has some advantages for us:
* it is easy for people to join us:
+
=== Easy for people to join us ===
 
Before emerge it was quite some work to set a system up for development. There were some quirks, which were documented in some mailing lists, but you had to remember them or you ran into an already solved problem again, etc.
 
Before emerge it was quite some work to set a system up for development. There were some quirks, which were documented in some mailing lists, but you had to remember them or you ran into an already solved problem again, etc.
 
Now to get a development machine you need a Windows computer, need to install Python and Git and do the emerge checkout. Then execute emerge to build what you want to build. This is easy for developers coming from Windows to KDE, and also for KDE developers coming to Windows.
 
Now to get a development machine you need a Windows computer, need to install Python and Git and do the emerge checkout. Then execute emerge to build what you want to build. This is easy for developers coming from Windows to KDE, and also for KDE developers coming to Windows.
* it is easy for us to do (nightly/continuous/release/reproducable/...) builds:
+
=== Easy for us to do build ===
 
With emerge you can build the whole software stack (low-level libs, Qt, kdelibs, things above that) with only one command. You can start that build, and some hours later you can check if it worked, or if something broke. So we can spot problems easier and earlier. We can also start with a "naked" Windows computer without any other installed software and bootstrap kde on it. That ensures, that no hidden dependencies on some pieces of software sneak in, because then the builds on a "naked" computer would break and show the problem.
 
With emerge you can build the whole software stack (low-level libs, Qt, kdelibs, things above that) with only one command. You can start that build, and some hours later you can check if it worked, or if something broke. So we can spot problems easier and earlier. We can also start with a "naked" Windows computer without any other installed software and bootstrap kde on it. That ensures, that no hidden dependencies on some pieces of software sneak in, because then the builds on a "naked" computer would break and show the problem.
* it is easier to collaborate:
+
=== Easy to collaborate ===
 
We can test the same emerge build description for a package on different Windows versions/computers before we do binary releases. People can also add build descriptions for new packages to the Subversion repository.
 
We can test the same emerge build description for a package on different Windows versions/computers before we do binary releases. People can also add build descriptions for new packages to the Subversion repository.
  
Line 15: Line 15:
 
== Set up the environment ==
 
== Set up the environment ==
 
=== Root directory ===
 
=== Root directory ===
Create a directory if possible in your harddrive's root e.g. C:\kderoot or D:\kderoot (You will need this PATH later). This directory will contain the whole kde installation later. We will refer to it as %KDEROOT%.
+
Create a directory if possible in your harddrive's root e.g. C:\kderoot or D:\kderoot (You will need this PATH later). This directory will contain the whole kde installation later. We will refer to it as KDEROOT.
  
 
=== Python interpreter ===
 
=== Python interpreter ===
<tt>emerge.bat</tt> invokes an <tt>emerge.py</tt> script written in [http://en.wikipedia.org/wiki/Python_%28programming_language%29 Python] programming language, so you first need to [http://www.python.org/download/ install the Python 3.2 Interpreter]. The ''python'' installation directory will be added to the PATH later by <tt>%KDEROOT%\etc\kdesettings.bat</tt> script.
+
<tt>emerge.bat</tt> invokes an <tt>emerge.py</tt> script written in [http://en.wikipedia.org/wiki/Python_%28programming_language%29 Python] programming language, so you first need to [http://www.python.org/download/ install the Python 3.4 Interpreter]. The ''python'' installation directory will be added to the PATH later by <tt>KDEROOT\etc\kdesettings.ini</tt>.
''Beginning from the KDE 4.8 (including master and the frameworks branch) Python 3.2 will be required.''
+
  
 
=== Git client ===
 
=== Git client ===
Line 26: Line 25:
 
*a GUI program like [http://code.google.com/p/tortoisegit/ TortoiseGit], optional, useful for displaying differences between various versions of files in the repository in a graphical way.
 
*a GUI program like [http://code.google.com/p/tortoisegit/ TortoiseGit], optional, useful for displaying differences between various versions of files in the repository in a graphical way.
  
Emerge uses its own git client for checking out all KDE source code. You can find it in %KDEROOT%\dev-utils\git\bin. It will be used by emerge even if you have another git executable installed.
+
Emerge uses its own git client for checking out all KDE source code. You can find it in KDEROOT\dev-utils\git\bin. It will be used by emerge even if you have another git executable installed.
  
 
=== Getting the ''emerge'' tool ===
 
=== Getting the ''emerge'' tool ===
 
The source code of the ''emerge'' tool and the recipes for creating KDE packages are located at <tt>git://anongit.kde.org/emerge.git</tt>, which is an URL based on the git-specific ''git'' protocol.
 
The source code of the ''emerge'' tool and the recipes for creating KDE packages are located at <tt>git://anongit.kde.org/emerge.git</tt>, which is an URL based on the git-specific ''git'' protocol.
  
You need to check out the source code from the ''emerge'' Subversion directory into a new directory below your root directory (the root directory is normally called %KDEROOT% here) or get it inside a self extracting archive (not tested yet).
+
You need to clone the source code from the ''emerge'' git repository into a new directory below your root directory (the root directory is normally called %KDEROOT% here) or get it inside a self extracting archive (not tested yet).
  
 
==== Check out using the 'git' command ====
 
==== Check out using the 'git' command ====
  
*Option 1: With the ''git'' command line tool, you can accomplish this with the following commands:<pre>cd /d %KDEROOT%</pre>
+
With the ''git'' command line tool, you can accomplish this with the following commands:
**if you will only use anonymous (read-only) access to the KDE git repository:<pre>git clone git://anongit.kde.org/emerge.git</pre>
+
:: <pre>cd KDEROOT</pre>
**if the git and ssh ports are blocked, and only http is allowed, it is better to clone over the http port for getting (read-only) access to the KDE git repository:<pre>git clone http://anongit.kde.org/emerge.git</pre>
+
*if you will only use anonymous (read-only) access to the KDE git repository:<pre>git clone git://anongit.kde.org/emerge.git</pre>
**or, if you plan to use write access (commit) to the emerge repository using your existing account & OpenSSH private key: <pre>git clone git@git.kde.org:emerge.git</pre>
+
*if the git and ssh ports are blocked, and only http is allowed, it is better to clone over the http port for getting (read-only) access to the KDE git repository:<pre>git clone http://anongit.kde.org/emerge.git</pre>
 +
*or, if you plan to use write access (commit) to the emerge repository using your existing account & OpenSSH private key: <pre>git clone git@git.kde.org:emerge.git</pre>
  
 
=== Configure the ''emerge'' tool ===
 
=== Configure the ''emerge'' tool ===
# Create the directory <tt>%KDEROOT%\etc</tt>.
+
# Create the directory <tt>KDEROOT\etc</tt>.
# Copy the file <tt>%KDEROOT%\emerge\kdesettings-example.bat</tt> as <tt>%KDEROOT%\etc\kdesettings.bat</tt> and change its contents according to your needs. The options are described in the ''rem'' lines in the file itself.
+
# Copy the file <tt>KDEROOT\emerge\kdesettings.ini</tt> as <tt>KDEROOT\etc\kdesettings.ini</tt> and change its contents according to your needs.
 
+
The kdesettings.bat script will be called by the main kdeenv.bat script.
+
  
 
Note 0: '''Read the comments in that file very carefully'''
 
Note 0: '''Read the comments in that file very carefully'''
  
Note 1: '''Be sure that you neither have the msys/bin nor the cygwin/bin in your path. If so you have to definitely remove it from the path.''' The same goes for msys-git, so make sure to remove c:\Program Files (x86)\git\bin from your path.
+
Note 1: '''Be sure that you neither have the msys/bin nor the cygwin/bin in your path. If so you have to definitely remove it from the path.'''  
  
 
Note 2 '''from a user: The applications gimp, inkscape and graphviz are also a problem. To make sure that there's nothing wrong I stripped my path to contain only what I needed to build.'''
 
Note 2 '''from a user: The applications gimp, inkscape and graphviz are also a problem. To make sure that there's nothing wrong I stripped my path to contain only what I needed to build.'''
  
Note 3 '''from another user: be careful when renaming the file to "kdesettings.bat" it is easy to end up with "kdesettings.bat.bat" instead of what you want since Windows(by default) will not show the the file extension part of a file.'''
+
emerge has several branches which contain specific package versions. E.g. if you want to build the 4.13 branch of KDE (or one of the 4.13 releases) you should checkout the ''kde-4.13'' branch of emerge; in the ''master'' branch, you can find the KDE Frameweorks 5.
  
emerge has several branches which contain specific package versions. E.g. if you want to build the 4.8 branch of KDE (or one of the 4.8 releases) you should checkout the ''kde-4.8'' branch of emerge; in the ''master'' branch, you can find KDE ''master/trunk''. To view all branches, use the following command:
+
To view all branches, use the following command:
 
<pre>git branch -a</pre>
 
<pre>git branch -a</pre>
 
To change the branch of emerge, do the following:
 
To change the branch of emerge, do the following:
<pre>cd emerge && git checkout kde-4.8</pre>
+
<pre>cd emerge && git checkout kde-4.13</pre>
 
+
=== [Optional, Advanced] emergehosts.conf ===
+
Add a file emergehosts.conf in the <tt>%KDEROOT%\etc</tt> directory. The format of this file is a typical config file with only two entries per section:
+
The first entry is the ''host'' as mentioned in the portage file for the package. The second entry is called ''replace'' and is the replace string for the host string.
+
 
+
As an example, here is how to checkout all gitorious based repos of the kde-developers group using a push url instead of the anonymous access:
+
<syntaxhighlight lang="text">
+
[qt gitorious]
+
host: git://gitorious.org/+kde-developers/
+
replace: git@gitorious.org:+kde-developers/
+
</syntaxhighlight>
+
 
+
As a second example here is how to checkout with a ssh user from a subversion repository:
+
<syntaxhighlight lang="text">
+
[svn.example.com]
+
host: svn://svn.example.com/
+
replace: svn+ssh://user@svn.example.com/
+
</syntaxhighlight>
+
 
+
The name of the section doesn't matter and can be used for descriptions.
+
  
 
=== [Optional, Advanced] emerge-boost-config.jam ===
 
=== [Optional, Advanced] emerge-boost-config.jam ===
Line 108: Line 86:
 
== Using emerge ==
 
== Using emerge ==
  
To use emerge you need to start a console window and point that to <tt>%KDEROOT%\emerge</tt>. For example:
+
To use emerge you need to start a Powershell window and point that to <tt>KDEROOT\emerge</tt>. For example:
  
 
  C:
 
  C:
  cd \%KDEROOT%\emerge
+
  cd KDEROOT\emerge
  
Then you have to execute
+
Then in the windows powershell you have to load the script with
  
  kdeenv.bat
+
  ". .\kdeenv.ps1"
  
This tells emerge about your environment settings (e.g. paths). It will load your configuration from <tt>%KDEROOT%\etc\kdesettings.bat</tt>. It should not give any error messages, otherwise emerge will not work as expected. The output should look similar to this one (of course with your paths):
+
This tells emerge about your environment settings (e.g. paths). It will load your configuration from <tt>KDEROOT\etc\kdesettings.ini</tt>. It should not give any error messages, otherwise emerge will not work as expected. The output should look similar to this one (of course with your paths):
  
  C:\kderoot\emerge>kdeenv.bat
+
  PS C:\kderoot\emerge>.\kdeenv.ps1
kdesettings.bat executed
+
  KDEROOT    : r:\
  KDEROOT    : C:\kderoot
+
  KDECOMPILER : mingw-w64
  KDECOMPILER : mingw
+
  KDESVNDIR  : s:\
  KDESVNDIR  : C:\kderoot\svn
+
KDEGITDIR  : q:\
  PYTHONPATH  : C:\python32
+
DOWNLOADDIR : t:\
  DOWNLOADDIR : C:\kderoot\download
+
  PYTHONPATH  : C:\python34
 +
   
 +
PS C:\kderoot\emerge>
  
C:\kderoot\emerge>
+
''Note: There is a short path option in kdesettings which you will need if you want to build Qt in a directory that has a pathlength of more then around 5 characters. This problem is due to limitations of the command line length and the Qt build system.''
  
Next, if you have configured your kdesettings.bat to use svn+ssh for your subversion checkout, then you need to run:
+
Next, if you have configured your kdesettings.ini to use svn+ssh for your subversion checkout, then you need to run:
  
 
<syntaxhighlight lang="text">plink <your-svn-username>@svn.kde.org
 
<syntaxhighlight lang="text">plink <your-svn-username>@svn.kde.org
Line 136: Line 116:
 
This will prompt you to accept the fingerprint of the server, otherwise svn will hang forever when trying to download from the server.
 
This will prompt you to accept the fingerprint of the server, otherwise svn will hang forever when trying to download from the server.
  
Now you should be able to use emerge. Type
+
Now you should be able to use emerge. To get some help on usage:
  
 
  emerge --help
 
  emerge --help
  
to get some help on usage.
+
To get a list of available packages:
 +
emerge --print-installable
  
''Note: There is a short path option in kdesettings which you will
+
To get a list of currently installed packages:
need if you want to build Qt in a directory that has a pathlenght of
+
emerge --print-installed
more then around 5 characters. This problem is due to limitations of the command line length and the Qt build system.''
+
  
 
== Setting up a compiler ==
 
== Setting up a compiler ==
 
Currently emerge supports both the MinGW and MS Visual C++ (msvc) compilers. We did not add dependencies for the compilers, so you have to make sure to install a compiler by yourself. There are three ways to set up a compiler for emerge.
 
Currently emerge supports both the MinGW and MS Visual C++ (msvc) compilers. We did not add dependencies for the compilers, so you have to make sure to install a compiler by yourself. There are three ways to set up a compiler for emerge.
We assumed you have set KDECOMPILER variable properly in the <tt>%KDEROOT%\etc\kdesettings.bat</tt>.
+
We assumed you have set KDECOMPILER variable properly in the <tt>KDEROOT\etc\kdesettings.ini</tt>.
  
 
In the following sections you can find information on how to install or reuse an existing compiler.
 
In the following sections you can find information on how to install or reuse an existing compiler.
Line 157: Line 137:
 
=== Install MS Visual C++ ===
 
=== Install MS Visual C++ ===
 
Read [[../MS_Visual_Studio#The_Compiler|here]].
 
Read [[../MS_Visual_Studio#The_Compiler|here]].
 
 
  
 
=== Point to an existing MS Visual C++ installation ===
 
=== Point to an existing MS Visual C++ installation ===
You need to point emerge to an existing msvc installation. This is run automatically for you from kdeenv.bat if configured properly in kdesettings.bat. Check your kdesettings.bat file to know where to set it.
+
You need to point emerge to an existing msvc installation. This is run automatically for you from kdeenv.bat if configured properly in kdesettings.ini. Check your kdesettings.ini file to know where to set it.
  
 
== Installing the base system ==
 
== Installing the base system ==
 
Once you have emerge and a compiler installed and working, try:
 
Once you have emerge and a compiler installed and working, try:
* <tt>emerge --help</tt> for a list of available commands
 
* <tt>emerge --print-installable</tt> to get a list of available packages
 
* <tt>emerge --print-installed</tt> to get a list of currently installed packages
 
Further options are described below.
 
  
 
You are now ready to start building KDE, it is recommended to do so progressively, relying on emerge to automatically resolve the required dependencies at each set step:
 
You are now ready to start building KDE, it is recommended to do so progressively, relying on emerge to automatically resolve the required dependencies at each set step:
  
 
* Enter <tt>emerge qt</tt>.  This will fetch and install Windows versions of numerous UNIX-like utilities and libraries, then checkout, compile and install Qt.  This will take several hours.
 
* Enter <tt>emerge qt</tt>.  This will fetch and install Windows versions of numerous UNIX-like utilities and libraries, then checkout, compile and install Qt.  This will take several hours.
* Enter <tt>emerge kdelibs</tt>.  This will checkout, compile and install the required kdesupport modules and then kdelibs.
+
* Enter <tt>emerge frameworks</tt>.  This will checkout, compile and install the kde frameworks 5 modules.
 
* Enter <tt>emerge kde-baseapps</tt>. This will checkout, compile and install kdebase-runtime, and kdebase-apps.
 
* Enter <tt>emerge kde-baseapps</tt>. This will checkout, compile and install kdebase-runtime, and kdebase-apps.
  
Line 185: Line 159:
  
 
== What emerge does ==
 
== What emerge does ==
'''emerge ''packageName'' ''' performs the separate actions <tt>--fetch</tt>, <tt>--unpack</tt>, <tt>--compile</tt>, <tt>--install</tt>, and <tt>--qmerge</tt>.
+
Emerge can be thought of as performing many of the functions of automated tools like cmake, but in a flexible Python scripting framework.  The benefit of this is that new libraries with idiosyncratic installation procedures, conflicting library and header installation names, and complex rules for building on different setups can be generated automatically, and all directory management should be taken care of without the user's input.
  
The <tt>--fetch</tt> action will retrieve either a binary or the source code for the package:
+
The primary logic for the program is contained in the /bin folder of the Git repository.  The script emerge.py serves as the entry point to the system; it runs appropriate code according to the command line arguments.  The basic command '''emerge ''packageName'' ''' performs the five most important actions <tt>--fetch</tt>, <tt>--unpack</tt>, <tt>--compile</tt>, <tt>--install</tt>, and <tt>--qmerge</tt>.  The definition for each of these steps is defined using a flexible system called Portage, after the Gentoo package management system. The basic goals are:
* If a binary package, this will be downloaded into the <tt>DOWNLOADDIR</tt> defined in your <tt>kdesettings.bat</tt>, which is usually <tt>%KDEROOT%\download</tt>.
+
 
* If a non-KDE source package, the source repository will be checked-out into <tt>%DOWNLOADDIR%\svn-src</tt>, e.g. Qt source may be found in <tt>C:\kderoot\download\svn-src\qt</tt>.
+
1. Fetch action retrieves either a binary or the source code for the package.
* If a KDE source package from the <tt>svn.kde.org</tt> repository, then the source will be checked-out into the <tt>KDESVNDIR</tt> defined in your <tt>kdesettings.bat</tt>, which is usually <tt>%KDEROOT%\svn</tt>.
+
 
 +
2. Unpack action installs the source code in a source folder and applies KDE-specific patches.
 +
 
 +
3. Compile action runs package-dependent configure make steps.
 +
 
 +
4. Install action installs the headers and compiled library and executable outputs.
 +
 
 +
5. Qmerge action does something, but what?
 +
 
 +
 
 +
Emerge also offers functionality to document dependency trees, create patches to upload tweaks and fixes, and update and clean existing installs.
 +
 
 +
The actual commands for fetching, unpacking etc. are defined by three increasingly specialized levels of logic.  The first level is the code in the /bin folder and determines the overall order, steps should be taken, reading environment variables to configure the build environment and compiler set by <tt>kdeenv.bat</tt>, and parsing the directory tree. 
 +
 
 +
The second set of logic is found in the /bin/BuildSystem, /bin/Package, /bin/Packager, and /bin/Source folders.  This is used to determine general procedures for different classes of packages.  For example, the "Source" folder contains the logic for running the <tt>--fetch step</tt> for compressed files, git repositories, SVN, and so on.  The "Package" system contains logic for libraries that need to be configured with e.g. CMake, QMake, or internal make systems. 
 +
 
 +
The final set of logic is at the per-package level.  This is what is contained in the /portage/ directory.  Emerge is able to automatically search through the Portage folders to find the name of the package you specify.  This is where dependencies, special build configurations and special commands are set up.  Individual patch files and different version configuration information is also stored here.  It is relatively straightforward to add a new package to Portage, especially if the package itself can be downloaded and installed with CMake using minimal configuration. 
 +
 
 +
A good way to prepare a package for wider distribution is to create a simple <tt>CMakeLists.txt</tt> it.  You can format the addition of this file as a patch, and create a Portage script which merges the patch into the public code repository.
  
 
== ''emerge'' command line options and settings ==
 
== ''emerge'' command line options and settings ==
Line 204: Line 196:
 
|<tt>EMERGE_VERBOSE</tt>
 
|<tt>EMERGE_VERBOSE</tt>
 
|width="5%"|
 
|width="5%"|
|This option sets the verbosity level. Currently the highest verbosity level is 3 (<tt>-v -v -v</tt>). A verbosity level of 0 should give no output and equals to <tt>-q</tt>. You can set <tt>EMERGE_VERBOSE=3</tt> instead in the environment of the commandline or within your <tt>kdesettings.bat</tt> file.
+
|This option sets the verbosity level. Currently the highest verbosity level is 3 (<tt>-v -v -v</tt>). A verbosity level of 0 should give no output and equals to <tt>-q</tt>. You can set <tt>EMERGE_VERBOSE=3</tt> instead in the environment of the commandline or within your <tt>kdesettings.ini</tt> file.
 
|-valign="top"
 
|-valign="top"
 
|<tt>--offline</tt>
 
|<tt>--offline</tt>
Line 244: Line 236:
 
For Fine Tuning see here:
 
For Fine Tuning see here:
 
[[Projects/KDE_on_Windows/Installation#Fine-tuning|Fine-tuning]]
 
[[Projects/KDE_on_Windows/Installation#Fine-tuning|Fine-tuning]]
 
== Notes ==
 
 
''emerge'' can mostly cooperate with the [[Projects/KDE_on_Windows/Installation#KDE_Installer_for_Windows|kdewin-installer]] but we're currently still working on some packages which are packaged in a wrong way.
 
It is not recommended to use another layout then '''installer''' for '''directory_layout''' in the '''kdesettings.bat''' anymore (see that file for more detailed information).
 
 
''emerge'' creates lots of files in '''\kderoot\tmp''' during build.
 
After a package is successfully installed
 
(check '''\kderoot\etc\portage\installed''' or the directory '''\kderoot\manifest\'''), you can delete its temporary directory.
 
 
Windows ''emerge'' is derived from the Gentoo portage system, but we are currently not enforcing compatibility. If you have questions about that please contact us at the channel #kde-windows on irc.freenode.net.
 
 
last reviewed by [[User:SaroEngels|SaroEngels]] 22:52, 26th July 2011 (UTC)
 
  
 
==Vista issues==
 
==Vista issues==

Latest revision as of 20:57, 10 April 2015

emerge is a tool to build the KDE sources and its third-party requirements on MS Windows. It is the easy way to build KDE on MS Windows.

Contents

[edit] Introduction

Emerge is a tool that can build the different parts of KDE and its dependencies under Windows. We created this tool to automate and simplify the build process under Windows. We try to build all packages that we offer in the KDE installer with emerge. That has some advantages for us:

[edit] Easy for people to join us

Before emerge it was quite some work to set a system up for development. There were some quirks, which were documented in some mailing lists, but you had to remember them or you ran into an already solved problem again, etc. Now to get a development machine you need a Windows computer, need to install Python and Git and do the emerge checkout. Then execute emerge to build what you want to build. This is easy for developers coming from Windows to KDE, and also for KDE developers coming to Windows.

[edit] Easy for us to do build

With emerge you can build the whole software stack (low-level libs, Qt, kdelibs, things above that) with only one command. You can start that build, and some hours later you can check if it worked, or if something broke. So we can spot problems easier and earlier. We can also start with a "naked" Windows computer without any other installed software and bootstrap kde on it. That ensures, that no hidden dependencies on some pieces of software sneak in, because then the builds on a "naked" computer would break and show the problem.

[edit] Easy to collaborate

We can test the same emerge build description for a package on different Windows versions/computers before we do binary releases. People can also add build descriptions for new packages to the Subversion repository.

This emerge tool was inspired by the Gentoo emerge tool.

[edit] Set up the environment

[edit] Root directory

Create a directory if possible in your harddrive's root e.g. C:\kderoot or D:\kderoot (You will need this PATH later). This directory will contain the whole kde installation later. We will refer to it as KDEROOT.

[edit] Python interpreter

emerge.bat invokes an emerge.py script written in Python programming language, so you first need to install the Python 3.4 Interpreter. The python installation directory will be added to the PATH later by KDEROOT\etc\kdesettings.ini.

[edit] Git client

The latest source code for Windows emerge and a lot of the rest of KDE is stored in a repository created and managed using the Git version control tool. You need a git client for the first checkout of emerge. There are at least two applications:

  • a command line client, available at subversion.apache.org, aimed at developers or power users accustomed with the command line,
  • a GUI program like TortoiseGit, optional, useful for displaying differences between various versions of files in the repository in a graphical way.

Emerge uses its own git client for checking out all KDE source code. You can find it in KDEROOT\dev-utils\git\bin. It will be used by emerge even if you have another git executable installed.

[edit] Getting the emerge tool

The source code of the emerge tool and the recipes for creating KDE packages are located at git://anongit.kde.org/emerge.git, which is an URL based on the git-specific git protocol.

You need to clone the source code from the emerge git repository into a new directory below your root directory (the root directory is normally called %KDEROOT% here) or get it inside a self extracting archive (not tested yet).

[edit] Check out using the 'git' command

With the git command line tool, you can accomplish this with the following commands:

cd KDEROOT
  • if you will only use anonymous (read-only) access to the KDE git repository:
    git clone git://anongit.kde.org/emerge.git
  • if the git and ssh ports are blocked, and only http is allowed, it is better to clone over the http port for getting (read-only) access to the KDE git repository:
    git clone http://anongit.kde.org/emerge.git
  • or, if you plan to use write access (commit) to the emerge repository using your existing account & OpenSSH private key:
    git clone git@git.kde.org:emerge.git

[edit] Configure the emerge tool

  1. Create the directory KDEROOT\etc.
  2. Copy the file KDEROOT\emerge\kdesettings.ini as KDEROOT\etc\kdesettings.ini and change its contents according to your needs.

Note 0: Read the comments in that file very carefully

Note 1: Be sure that you neither have the msys/bin nor the cygwin/bin in your path. If so you have to definitely remove it from the path.

Note 2 from a user: The applications gimp, inkscape and graphviz are also a problem. To make sure that there's nothing wrong I stripped my path to contain only what I needed to build.

emerge has several branches which contain specific package versions. E.g. if you want to build the 4.13 branch of KDE (or one of the 4.13 releases) you should checkout the kde-4.13 branch of emerge; in the master branch, you can find the KDE Frameweorks 5.

To view all branches, use the following command:
git branch -a

To change the branch of emerge, do the following:

cd emerge && git checkout kde-4.13

[edit] [Optional, Advanced] emerge-boost-config.jam

Add a file emerge-boost-config.jam in the %KDEROOT%\etc directory to build boost in a specific way. The only current use case is for the following problem: If you build 32bit binaries with emerge on a 64bit system you need to link boost-python against a 32bit python library. In case your standard python installation is 64bit though, you can specify the python installation in the following way:

# ---------------------
# Python configuration.
# ---------------------
 
# Configure specific Python version.
using python : 3.2 : C:\\Python32_x86 ;

This way boost-python would be using the headers & libraries from C:\\Python32_x86 instead of the default one. Please remember that for mingw compilers you must regenerate the import library for the python dll (also for the mingw 64bit compiler):

R:\> emerge pexports
R:\> pexports C:\Python32_x86\python32.dll > C:\Python32_x86\libs\python32.def

NOTE: In case you generate the import library for the 64bit compiler, add the following line to the file python32.def:

Py_InitModule4 = Py_InitModule4_64

For both compilers you should now run:

dlltool -d C:\Python32_x86\libs\python32.def -l C:\Python32_x86\libs\libpython32.dll.a

Now you should be able to do emerge -i boost-python-src without errors.

[edit] Using emerge

To use emerge you need to start a Powershell window and point that to KDEROOT\emerge. For example:

C:
cd KDEROOT\emerge

Then in the windows powershell you have to load the script with

". .\kdeenv.ps1"

This tells emerge about your environment settings (e.g. paths). It will load your configuration from KDEROOT\etc\kdesettings.ini. It should not give any error messages, otherwise emerge will not work as expected. The output should look similar to this one (of course with your paths):

PS C:\kderoot\emerge>.\kdeenv.ps1
KDEROOT     : r:\
KDECOMPILER : mingw-w64
KDESVNDIR   : s:\
KDEGITDIR   : q:\
DOWNLOADDIR : t:\
PYTHONPATH  : C:\python34

PS C:\kderoot\emerge>

Note: There is a short path option in kdesettings which you will need if you want to build Qt in a directory that has a pathlength of more then around 5 characters. This problem is due to limitations of the command line length and the Qt build system.

Next, if you have configured your kdesettings.ini to use svn+ssh for your subversion checkout, then you need to run:

plink <your-svn-username>@svn.kde.org
plink <your-kde-username>@git.kde.org

This will prompt you to accept the fingerprint of the server, otherwise svn will hang forever when trying to download from the server.

Now you should be able to use emerge. To get some help on usage:

emerge --help

To get a list of available packages:

emerge --print-installable

To get a list of currently installed packages:

emerge --print-installed

[edit] Setting up a compiler

Currently emerge supports both the MinGW and MS Visual C++ (msvc) compilers. We did not add dependencies for the compilers, so you have to make sure to install a compiler by yourself. There are three ways to set up a compiler for emerge. We assumed you have set KDECOMPILER variable properly in the KDEROOT\etc\kdesettings.ini.

In the following sections you can find information on how to install or reuse an existing compiler.

[edit] Install the MinGW compiler with emerge

Let emerge install the MinGW compiler, as soon as emerge needs MinGW it will automatically fetch the correct version for you.

[edit] Install MS Visual C++

Read here.

[edit] Point to an existing MS Visual C++ installation

You need to point emerge to an existing msvc installation. This is run automatically for you from kdeenv.bat if configured properly in kdesettings.ini. Check your kdesettings.ini file to know where to set it.

[edit] Installing the base system

Once you have emerge and a compiler installed and working, try:

You are now ready to start building KDE, it is recommended to do so progressively, relying on emerge to automatically resolve the required dependencies at each set step:

  • Enter emerge qt. This will fetch and install Windows versions of numerous UNIX-like utilities and libraries, then checkout, compile and install Qt. This will take several hours.
  • Enter emerge frameworks. This will checkout, compile and install the kde frameworks 5 modules.
  • Enter emerge kde-baseapps. This will checkout, compile and install kdebase-runtime, and kdebase-apps.

You will now have successfully installed a base KDE system and can now install other KDE modules as required.

Note that this will install the development version of KDE (trunk in svn repositories, master in git repositories), if you wish to install a particular stable branch then you should change the branch of emerge to the specific branch of that release. NOTE: You should not mix kde packages from different branches.

It is strongly recommended you do not choose to manually install any of the utilities and libraries yourself, as you may install the wrong version and cause installation failures. Instead allow emerge to resolve the dependencies for you.

Every time you want to update or install a package, you should first update your emerge checkout (simply run emerge --update emerge) to ensure you are using the latest package recipies.

[edit] What emerge does

Emerge can be thought of as performing many of the functions of automated tools like cmake, but in a flexible Python scripting framework. The benefit of this is that new libraries with idiosyncratic installation procedures, conflicting library and header installation names, and complex rules for building on different setups can be generated automatically, and all directory management should be taken care of without the user's input.

The primary logic for the program is contained in the /bin folder of the Git repository. The script emerge.py serves as the entry point to the system; it runs appropriate code according to the command line arguments. The basic command emerge packageName performs the five most important actions --fetch, --unpack, --compile, --install, and --qmerge. The definition for each of these steps is defined using a flexible system called Portage, after the Gentoo package management system. The basic goals are:

1. Fetch action retrieves either a binary or the source code for the package.

2. Unpack action installs the source code in a source folder and applies KDE-specific patches.

3. Compile action runs package-dependent configure make steps.

4. Install action installs the headers and compiled library and executable outputs.

5. Qmerge action does something, but what?


Emerge also offers functionality to document dependency trees, create patches to upload tweaks and fixes, and update and clean existing installs.

The actual commands for fetching, unpacking etc. are defined by three increasingly specialized levels of logic. The first level is the code in the /bin folder and determines the overall order, steps should be taken, reading environment variables to configure the build environment and compiler set by kdeenv.bat, and parsing the directory tree.

The second set of logic is found in the /bin/BuildSystem, /bin/Package, /bin/Packager, and /bin/Source folders. This is used to determine general procedures for different classes of packages. For example, the "Source" folder contains the logic for running the --fetch step for compressed files, git repositories, SVN, and so on. The "Package" system contains logic for libraries that need to be configured with e.g. CMake, QMake, or internal make systems.

The final set of logic is at the per-package level. This is what is contained in the /portage/ directory. Emerge is able to automatically search through the Portage folders to find the name of the package you specify. This is where dependencies, special build configurations and special commands are set up. Individual patch files and different version configuration information is also stored here. It is relatively straightforward to add a new package to Portage, especially if the package itself can be downloaded and installed with CMake using minimal configuration.

A good way to prepare a package for wider distribution is to create a simple CMakeLists.txt it. You can format the addition of this file as a patch, and create a Portage script which merges the patch into the public code repository.

[edit] emerge command line options and settings

There are some options that can be used when building with emerge.

Command line switch Command line argument Description
-v EMERGE_VERBOSE This option sets the verbosity level. Currently the highest verbosity level is 3 (-v -v -v). A verbosity level of 0 should give no output and equals to -q. You can set EMERGE_VERBOSE=3 instead in the environment of the commandline or within your kdesettings.ini file.
--offline This option suppresses the update step of the local tree - which needs some time. Be aware though that you have to have existing sources already if you want to use this option.
-t EMERGE_BUILDTESTS This option enables or disables KDE4 buildtests for KDE modules. Other packages will not change. Use EMERGE_BUILDTESTS=True or =False.
--print-targets This option will display all "targets" a certain package has. Normally targets are fixed releases or different branches. They are defined in the portage file.
--target=TARGET This sets a specific target for this package. If not added, the default target is used, which can be checked by looking at the output of --print-targets.
-i This option ignores that a package is already installed. It builds it completely new, but keeps the dependencies.
--update This option ignores that a package is already installed but doesn't cleanup an already existing build directory. Thus you will only rebuild files that have changed since the last build.

[edit] Hints

[edit] Updating packages

  • Once you have packagename built, type
    emerge --update packagename
    to update packagename from the Subversion and compile it without removing the build dir or
    emerge --update-all
    to update all packages that can be rebuild (they are rebuild with --update).

[edit] General setup

For Fine Tuning see here: Fine-tuning

[edit] Vista issues

  • jstaniek 12:02, 15 January 2008 (CET): UAC has infamous heuristics that make programs like patch.exe treat as installers and try to run them with admin rights (!). This heuristics can be tricked by renaming patch.exe to something like pch.exe (example) but we did not want to add item to our infrastructure. Instead it is possibleto turn off the heuristics (see the screenshot here in the security blog calling the heuristics 'severe hole in the design of UAC'). If you happen to disable the UAC, as many annoyed users and devs do (msvc demands admin rights anyway!), patch.exe should already work for you as in older Windows. Alternatively you may want to disable UAC for admins only, but this makes no sense if you are the only user of your machine and use only the admin account.
  • This wiki page lists instructions on how to use program manifest to disable privilege elevation for a single binary and makes patch play nice with UAC. This should eventually be integrated to emerge scripts.

This page was last modified on 10 April 2015, at 20:57. This page has been accessed 142,297 times. Content is available under Creative Commons License SA 3.0 as well as the GNU Free Documentation License 1.2.
KDE® and the K Desktop Environment® logo are registered trademarks of KDE e.V.Legal