Development/Tutorials/Common Programming Mistakes/en

From KDE TechBase
Common Programming Mistakes
Tutorial Series   Getting Started
Previous   None
What's Next   n/a
Further Reading   APIs to avoid

Abstract

This tutorial aims to combine the experience of KDE developers regarding Qt and KDE frameworks dos and don'ts. Besides actual mistakes, it also covers things that are not necessarily "bugs" but which make the code either slower or less readable.

General C++

This section guides you through some of the more dusty corners of C++ which either tend to be misused or which people often simply get wrong.

Anonymous namespaces vs statics

If you have a method in a class that does not access any members and therefore does not need an object to operate, make it static. If additionally, it is a private helper function that is not needed outside of the file, make it a file-static function. That hides the symbol completely.

Symbols defined in a C++ anonymous namespace do not have internal linkage. Anonymous namespaces only give a unique name for that translation unit and that is it; they do not change the linkage of the symbol at all. Linkage is not changed on those because the second phase of two-phase name lookup ignores functions with internal linkages. Also, entities with internal linkage cannot be used as template arguments.

So for now instead of using anonymous namespaces use static if you do not want a symbol to be exported.

NULL pointer issues

First and foremost: it is fine to delete a null pointer. So constructs like this that check for null before deleting are simply redundant: 

if ( ptr ) {
   delete ptr;
}

Note however, that a null check is required when you delete an array - that's because a relatively recent compiler on Solaris does not handle it properly otherwise.

When you delete a pointer, make sure you also set it to 0 so that future attempts to delete that object will not fail in a double delete. So the complete and proper idiom is: 

delete ptr; 
ptr = 0;

You may notice that null pointers are marked variously in one of four ways: 0, 0L, NULL and nullptr. In C, NULL is defined as a null void pointer. In C++, more type safety is possible due to stricter type checking. Modern C++11 implementations (and all C++14 implementations) define NULL to equal the special value nullptr. Nullptr can be automatically cast to boolean false, but a cast to an integer type will fail. This is useful to avoid accidentally. Older C++ implementations before c++11 simply defined NULL to 0L or 0, which provides no additional type safety - one could assign it to an integer variable, which is obviously wrong. For code which does not need to support outdated compilers the best choice is nullptr.

In pointer context, the integer constant zero means "null pointer" - irrespective of the actual binary representation of a null pointer. Note, however, that if you want to pass a null pointer constant to a function in a variable argument list, you *must* explicitly cast it to a pointer - the compiler assumes integer context by default, which might or might not match the binary representation of a pointer.

Member variables

You will encounter four major styles of marking class member variables in KDE, besides unmarked members:

  • m_variable lowercase m, underscore and the name of the variable starting with a lowercase letter. This is the most common style and one preferred for code in kdelibs.
  • mVariable lowercase m and the name of variable starting with an uppercase letter
  • variable_ variable name starting with a lowercase letter and then an underscore
  • _variable underscore and the name of variable starting with a lowercase letter. This style is actually usually frowned upon as this notation is also used in some code for function parameters instead.

Unmarked members are more common in the case of classes that use d-pointers.

As it often happens there is no one correct way of doing it, so remember to always follow the syntax used by the application/library to which you are committing. If you're creating a new file, you may want to follow the coding style of the library or module you're adding the file to.

Note that symbols starting with undercores are reserved to the C library (underscore followed by capital or double underscore are reserved to the compiler), so if you can, avoid using the last type.

Static variables

Try to limit the number of static variables used in your code, especially when committing to a library. Construction and initialization of a large number of static variables really hurts the startup times.

Do not use class-static variables, especially not in libraries and loadable modules though it is even discouraged in applications. Static objects lead to lots of problems such as hard to debug crashes due to undefined order of construction/destruction.

Instead, use a static pointer, together with K_GLOBAL_STATIC which is defined in kglobal.h and is used like this: 

class A { ... };

K_GLOBAL_STATIC(A, globalA)

void doSomething()
{
     A *a = globalA;
     ...
}

void doSomethingElse()
{
    if (globalA.isDestroyed()) {
        return;
    }
    A *a = globalA;
    ...
}

void installPostRoutine()
{
    qAddPostRoutine(globalA.destroy);
}

See the API documentation for K_GLOBAL_STATIC for more information.

Constant data

If you need some constant data of simple data types in several places, you do good by defining it once at a central place, to avoid a mistype in one of the instances. If the data changes there is also only one place you need to edit.

Even if there is only one instance you do good by defining it elsewhere, to avoid so-called "magic numbers" in the code which are unexplained (cmp. 42). Usually this is done at the top of a file to avoid searching for it.

Define the constant data using the language constructs of C++, not the preprocessor instructions, like you may be used to from plain C. This way the compiler can help you to find mistakes by doing type checking. 

// Correct!
static const int AnswerToAllQuestions = 42;
// Wrong!
#define AnswerToAllQuestions 42


If defining a constant array do not use a pointer as data type. Instead use the data type and append the array symbol with undefined length, [], behind the name. Otherwise you also define a variable to some const data. That variable could mistakenly be assigned a new pointer to, without the compiler complaining about. And accessing the array would have one indirection, because first the value of the variable needs to be read. 

// Correct!
static const char SomeString[] = "Example";
// Wrong!
static const char* SomeString = "Example";
// Wrong!
#define SomeString "Example"

Forward Declarations

You will reduce compile times by forward declaring classes when possible instead of including their respective headers. The rules for when a type can be used without being defined are a bit subtle, but intuitively, if the only important aspect is the name of the class, not the details of its implementation, a forward declaration is permissible. Two examples are when declaring pointers to the class or using the class as a function argument.

For example: 

#include <QWidget>     // slow
#include <QStringList> // slow
#include <QString>     // slow
#include <QIcon>      //slow
class SomeClass
{
public:
    virtual void widgetAction( QWidget *widget ) =0;
    virtual void stringAction( const QString& str ) =0;
    virtual void stringListAction( const QStringList& strList ) =0;
private: 
    QIcon *icon;
};

The above should instead be written like this: 

class QWidget;     // fast
class QStringList; // fast
class QString;     // fast
class QIcon;      // fast
class SomeClass
{
public:
    virtual void widgetAction( QWidget *widget ) =0;
    virtual void stringAction( const QString& str ) =0;
    virtual void stringListAction( const QStringList& strList ) =0;
private: 
    QIcon *icon;
};

Iterators

Prefer const iterators and cache end()

Prefer to use const_iterators over normal iterators when possible. Containers, which are being implicitly shared often detach when a call to a non-const begin() or end() methods is made (QList is an example of such a container). When using a const_iterator also watch out that you are really calling the const version of begin() and end(). Unless your container is actually const itself this probably will not be the case, possibly causing an unnecessary detach of your container. So basically whenever you use const_iterator initialize them using constBegin()/constEnd() instead, to be on the safe side.

Cache the return of the end() (or constEnd()) method call before doing iteration over large containers. For example: 

QList<SomeClass> container;

//code which inserts a large number of elements to the container

QList<SomeClass>::ConstIterator end = container.constEnd();
QList<SomeClass>::ConstIterator itr = container.constBegin();

for ( ; itr != end; ++itr ) {
    // use *itr (or itr.value()) here
}

This avoids the unnecessary creation of the temporary end() (or constEnd()) return object on each loop iteration, largely speeding it up.

When using iterators, always use pre-increment and pre-decrement operators (i.e., ++itr) unless you have a specific reason not to. The use of post-increment and post-decrement operators (i.e., itr++) cause the creation of a temporary object.

Take care when erasing elements inside a loop

When you want to erase some elements from the list, you maybe would use code similar to this: 

QMap<int, Job *>::iterator it = m_activeTimers.begin();
QMap<int, Job *>::iterator itEnd = m_activeTimers.end();

for( ; it != itEnd ; ++it) {
    if(it.value() == job) {
        //A timer for this job has been found. Let's stop it.
        killTimer(it.key());
        m_activeTimers.erase(it);
    }
}

This code will potentially crash because it is a dangling iterator after the call to erase(). You have to rewrite the code this way: 

QMap<int, Job *>::iterator it = m_activeTimers.begin();
while (it != m_activeTimers.end()) {
    if(it.value() == job) {
        //A timer for this job has been found. Let's stop it.
        killTimer(it.key());
        it = m_activeTimers.erase(it);
    } else {
        ++it;
    }
}

This problem is also discussed in the Qt documentation for QMap::iterator but applies to all Qt iterators

memory leaks

A very "popular" programming mistake is to do a new without a delete like in this program: mem_gourmet.cpp 

class t
{
    public:
      t() {}
};

void pollute()
{
    t* polluter = new t();
}

int main()
{
    while (true) pollute();
}

You see, pollute() instantiates a new object polluter of the class t. Then, the variable polluter is lost because it is local, but the content (the object) stays on the heap. I could use this program to render my computer unusable within 10 seconds.

To solve this, there are the following approaches:

  • keep the variable on the stack instead of the heap:
t* polluter = new t();

would become 

 
t polluter;
  • delete polluter using the complementing function to new:
 
delete polluter;
  • stop the polluter in an [1] (which will automatically delete the polluter when returning from the method)
 std::unique_ptr<t> polluter = new t();

There's also std::shared_ptr and QSharedPointer. This is the generally preferred way to do it in modern C++; explicit memory management should be avoided when possible.

Qt code involving QObject generally uses parent/child relations to free allocated memory; when constructing a QObject (e.g. a widget) it can be given a parent, and when the parent is deleted it deletes all its children. The parent is also set when you add a widget to a layout, for example.

A tool to detect memory leaks like this is Valgrind.

dynamic_cast

You can only dynamic_cast to type T from type T2 provided that:

  • T is defined in a library you link to (you'd get a linker error if this isn't the case, since it won't find the vtable or RTTI info)
  • T is "well-anchored" in that library. By "well-anchored" I mean that the vtable is not a COMMON symbol subject to merging at run-time by the dynamic linker. In other words, the first virtual member in the class definition must exist and not be inlined: it must be in a .cpp file.
  • T and T2 are exported

For instance, we've seen some hard-to-track problems in non-KDE C++ code we're linking with (I think NMM) because of that. It happened that:

  • libphonon loads the NMM plugin
  • NMM plugin links to NMM
  • NMM loads its own plugins
  • NMM's own plugins link to NMM

Some classes in the NMM library did not have well-anchored vtables, so dynamic_casting failed inside the Phonon NMM plugin for objects created in the NMM's own plugins.

Program Design

In this section we will go over some common problems related to the design of Qt/KDE applications.

Delayed Initialization

Although the design of modern C++ applications can be very complex, application windows can be loaded and displayed to the user very quickly through the technique of delayed initialization. This technique is relatively straightforward and useful at all stages of an interactive program.

First, let us look at the standard way of initializing a KDE application: 

int main( int argc, char **argv )
{
    ....
    KApplication a;

    KCmdLineArgs *args = KCmdLineArgs::parsedArgs();

    MainWindow *window = new MainWindow( args );

    a.setMainWidget( window );
    window->show();

    return a.exec();
}

Notice that window is created before the a.exec() call that starts the event loop. This implies that we want to avoid doing anything non-trivial in the top-level constructor, since it runs before we can even show the window.

The solution is simple: we need to delay the construction of anything besides the GUI until after the event loop has started. Here is how the example class MainWindow's constructor could look to achieve this: 

MainWindow::MainWindow()
{
    initGUI();
    QTimer::singleShot( 0, this, SLOT(initObject()) );
}

void MainWindow::initGUI()
{
    /* Construct your widgets here.  Note that the widgets you
     * construct here shouldn't require complex initialization
     * either, or you've defeated the purpose.
     * All you want to do is create your GUI objects and
     * QObject::connect
     * the appropriate signals to their slots.
     */
}

void MainWindow::initObject()
{
    /* This slot will be called as soon as the event loop starts.
     * Put everything else that needs to be done, including
     * restoring values, reading files, session restoring, etc here.
     * It will still take time, but at least your window will be
     * on the screen, making your app look active.
     */
}

Using this technique may not buy you any overall time, but it makes your app seem quicker to the user who is starting it. This increased perceived responsiveness is reassuring for the user as they get quick feedback that the action of launching the app has succeeded.

When (and only when) the start up can not be made reasonably fast enough, consider using a KSplashScreen.

Data Structures

In this section we will go over some of our most common pet-peeves which affect data structures very commonly seen in Qt/KDE applications.

Passing non-POD types

Non-POD ("plain old data") types should be passed by const reference if at all possible. This includes anything other than the basic types such as char and int.

Take, for instance, QString. They should always be passed into methods as const QString&. Even though QString is implicitly shared it is still more efficient (and safer) to pass const references as opposed to objects by value.

So the canonical signature of a method taking QString arguments is: 

void myMethod( const QString & foo, const QString & bar );

QObject

If you ever need to delete a QObject derived class from within one of its own methods, do not ever delete it this way: 

delete this;

This will sooner or later cause a crash because a method on that object might be invoked from the Qt event loop via slots/signals after you deleted it.

Instead always use QObject::deleteLater() which tries to do the same thing as delete this but in a safer way.

Empty QStrings

It is common to want to see if a QString is empty. Here are three ways of doing it, the first two of which are correct: 

// Correct
if ( mystring.isEmpty() ) {
}

// Correct
if ( mystring == QString() ) {
}

// Wrong! ""
if ( mystring == "" ) {
}

While there is a distinction between "null" QStrings and empty ones, this is a purely historical artifact and new code is discouraged from making use of it.

QString and reading files

If you are reading in a file, it is faster to convert it from the local encoding to Unicode (QString) in one go, rather than line by line. This means that methods like QIODevice::readAll() are often a good solution, followed by a single QString instantiation.

For larger files, consider reading a block of lines and then performing the conversion. That way you get the opportunity to update your GUI. This can be accomplished by reentering the event loop normally, along with using a timer to read in the blocks in the background, or by creating a local event loop.

While one can also use qApp->processEvents(), it is discouraged as it easily leads to subtle yet often fatal problems.

Reading QString from a KProcess

KProcess emits the signals readyReadStandard{Output|Error} as data comes in. A common mistake is reading all available data in the connected slot and converting it to QString right away: the data comes in arbitrarily segmented chunks, so multi-byte characters might be cut into pieces and thus invalidated. Several approaches to this problem exist:

  • Do you really need to process the data as it comes in? If not, just use readAllStandard{Output|Error} after the process has exited. Unlike in KDE3, KProcess is now able to accumulate the data for you.
  • Wrap the process into a QTextStream and read line-wise. This should work starting with Qt 4.4.
  • Accumulate data chunks in the slots and process them each time a newline arrives or after some timeout passes. Example code

QString and QByteArray

While QString is the tool of choice for many string handling situations, there is one where it is particularly inefficient. If you are pushing about and working on data in QByteArrays, take care not to pass it through methods which take QString parameters; then make QByteArrays from them again.

For example: 

QByteArray myData;
QString myNewData = mangleData( myData );

QString mangleData( const QString& data ) {
    QByteArray str = data.toLatin1();
    // mangle 
    return QString(str);
}

The expensive thing happening here is the conversion to QString, which does a conversion to Unicode internally. This is unnecessary because, the first thing the method does is convert it back using toLatin1(). So if you are sure that the Unicode conversion is not needed, try to avoid inadvertently using QString along the way.

The above example should instead be written as: 

QByteArray myData;
QByteArray myNewData = mangleData( myData );

QByteArray mangleData( const QByteArray& data )

QDomElement

When parsing XML documents, one often needs to iterate over all the elements. You may be tempted to use the following code for that: 

for ( QDomElement e = baseElement.firstChild().toElement();
      !e.isNull();
      e = e.nextSibling().toElement() ) {
       ...
}

That is not correct though: the above loop will stop prematurely when it encounters a QDomNode that is something other than an element such as a comment.

The correct loop looks like: 

for ( QDomNode n = baseElement.firstChild(); !n.isNull();
      n = n.nextSibling() ) {
    QDomElement e = n.toElement();
    if ( e.isNull() ) {
        continue;
    }
    ...
}
Retrieved from "https://techbase.kde.org/index.php?title=Development/Tutorials/Common_Programming_Mistakes/en&oldid=105221"