Projects/KMyMoney

This page is dedicated to technical aspects of KMyMoney for KDE Platform 4. If you are looking for other info, or the source tarball, go to the official page of KMyMoney.

Available versions

Latest release

KMyMoney 5.0.0 has been released on 2nd of February 2018. Alternatively, you can get the source from the KDE Git. (see link below)

Obsolete releases

KMyMoney 4.8.0 has been released on 14th of June 2016.

KMyMoney 4.7.2 has been released on 14st of April 2015.

KMyMoney 4.7.1 has been released on 1st of November 2014.

KMyMoney 4.7.0 has been released on 1st of October 2014.

KMyMoney 4.6.6 has been released on 24th of June 2014.

KMyMoney 4.6.4 has been released on 6th of October 2013.

KMyMoney 4.6.3 has been released on September 3rd 2012.

KMyMoney 4.6.2 has been released on February 4th 2012.

KMyMoney 4.6.1 has been released on November 6th 2011.

KMyMoney 4.6.0 has been released on August 8th 2011.

KMyMoney 4.5.3 has been released on February 13rd 2011.

KMyMoney 4.5.2 has been released on December 23rd 2010.

KMyMoney 4.5.1 has been released on November 14th 2010.

KMyMoney 4.5 has been released on August 16th 2010.

KMyMoney 3.98.1 has been released on May 21st 2010.

KMyMoney 3.98.0 has been released on May 15th 2010.

KMyMoney 3.97.2 has been released on Apr 6th 2010.

KMyMoney 3.96.1 has been released on Feb 17th 2010.

Installation

Requirements

KMyMoney depends on KDE SC 4.7+. Specifically on kdelibs, kde PIM libs, and kactivities.

*g++
*make
*cmake
*libkdepimlibs-devel
*libgpgme-dev
*libical-dev
*libkactivities-dev
*libgmp-dev
*libalkimia-dev

Optional

Additionally, you may want to install other libraries that will provide additional functionality:

libofx >= 0.9.2
Aqbanking >= 5.0.0
quote::finance (also known as libfinance-quote-perl)

Installation steps

If possible, it is always preferred to use a package specifically prepared for your distribution. However, if one is not available, or you want a more recent version, you can use the latest tarball. If you really need the most recent version, such as to test a new bug fix, get the source from KDE Git at

git://anongit.kde.org/kmymoney.

$ git clone git://anongit.kde.org/kmymoney

To install, read the README.cmake file in the root folder of the source. The basic steps are the following:

First, make sure you have uninstalled any old versions of kmymoney through your package manager and/or sudo make uninstall depending on how it was installed last time. Then:

$ mkdir build
$ cd build
$ cmake .. -DCMAKE_INSTALL_PREFIX=/usr/

optional, to adjust build configuration

$ ccmake .
$ make && make
$ sudo make install

It is important that the prefix is the same one that is used by your already installed KDE software. If it does not match, you will run into problems later. The separate build directory is mandatory (out of source build). The install step should be executed with admin privileges. Either switch to root or use sudo, or the appropriate steps for your installation.

To execute, either look for KMyMoney on the Office menu, or type kmymoney in a console window.

Localization

If you are installing from Git source, you need to install your locale files by hand. If you are installing from the tarball provided above, please skip this section.

To localize you will need to download the appropriate kmymoney.po file from http://websvn.kde.org/trunk/l10n-kf5/<country_code>/messages/extragear-office/ (replace <country_code> with the correct one for your locale e.g. es would give http://websvn.kde.org/trunk/l10n-kf5/es/messages/extragear-office/) and then, either by switching to root or using sudo, do the following:

Copy the kmymoney.po file into /usr/share/locale/<country_code>/
In that folder run:

  $ msgfmt kmymoney.po -o LC_MESSAGES/kmymoney.mo

  Note: use the msgfmt that comes with your distribution not the one needed for kmymoney2.

Debian dependencies

build-essential cmake kdelibs5-dev kdepimlibs5-dev libaqbanking29-dev libboost-graph-dev libfinance-quote-perl libgpgme11-dev libgwenhywfar47-dev libical-dev libjpeg62-dev libofx-dev libpng12-dev libsqlite3-dev libz-dev gettext

Guidelines

This version is only suitable for early adopters. It will behave fairly well, but the application might crash and you may lose some data. Make backups often.

For 3.95 version and later, we use the Bugzilla tracker at bugs.kde.org (BKO). Any bugs you find, please report it and assign to product kmymoney. Also, if you need help write to kmymoney-devel@kde.org.

Link to Debian bugs

The bugs in Debian tracker can be linked back to BKO

Open a bug report in KDE Bug Tracking System (BTS)
Link it to Debian bug number using "forwarded". See http://www.debian.org/Bugs/server-control#forwarded
When the bug is fixed in KDE BTS, the status will be synced in Debian BTS too.

Obtain a useful backtrace on Windows

If you would like to create a bug report about an application crash on Windows you need to take care of the following to create a useful report:

make sure that you can reproduce the crash
download the debug information that matches your version (4.6.3)
extract the archive in a folder of your choice (in this example c:\temp\kmm-debug-info) using 7z archiver
open cmd.exe
run set _NT_SYMBOL_PATH=c:\temp\kmm-debug-info
run "c:\Program Files\KMyMoney\bin\kdeinit4.exe" --terminate
run "c:\Program Files\KMyMoney\bin\kmymoney.exe"
try to reproduce the crash and use DrKonqi the KDE crash handler that appears when the application crashes (only on Windows 7) to report the crash on bugs.kde.org

Notes:

DrKonqi will inform you if the crash report is useful or not (it contains the debug information or not)
if DrKonqi says that the report is not useful something went wrong in the above steps
if you can't reproduce the crash immediately you can run KMyMoney for a while in an environment in which _NT_SYMBOL_PATH is defined as above (you can use a batch file for that)
when you no longer need the debug information you can safely delete the folder c:\temp\kmm-debug-info

Windows specific configuration options

KDE provided file dialogs for example for importer

add to share/config/kdeglobals

[KFileDialog Settings]
Native=false

Enable debug log level for online banking plugin

Open a command shell in kmymoney 'bin' dir and run

set AQBANKING_LEVEL=debug
set GWEN_LOGLEVEL=debug

Then start kmymoney with

kmymoney

Enable verbose log level for online banking plugin