Projects/KDE on Solaris/OpenSolaris: Difference between revisions

From KDE TechBase
(remove the now unneeded part of the effortless setup)
mNo edit summary
 
(38 intermediate revisions by 8 users not shown)
Line 1: Line 1:
{{warning|The KDE on Solaris project, also KDE on OpenSolaris, was active from around the year 2000 until nearly 2014, when the remaining team members ceased active development of the KDE packages. This page should be considered mostly of historical interest, although nothing stops anyone from trying to re-start KDE packaging on a descendant of Solaris such as IllumOS.}}
KDE on OpenSolaris is like [[Projects/KDE on Solaris]] but with some extra setup steps. There are IPS packages available intermittently.
KDE on OpenSolaris is like [[Projects/KDE on Solaris]] but with some extra setup steps. There are IPS packages available intermittently.


'''Status:''' For an overview of current issues, see the [[Projects/KDE_on_Solaris/OpenSolaris/Status|KDE4 on OpenSolaris status page]].


== Effortless building of KDE 4 ==


== Effortless building of KDE4.2(4.3) ==
* Install current Solaris (S11.1; OpenIndiana might work too). <br>Make sure you have enough memory (>=2GB) and swap (~2GB).
 
* Make sure your user ("test" in this case) has privileges to install software etc. <syntaxhighlight lang="bash"># usermod -P "Software Installation" test</syntaxhighlight>
* Install OpenSolaris 2009.6. Make sure you have enough memory (~1.5GB) and swap (~2GB).
* Download the Solaris Studio 12.3 tarball from http://www.oracle.com/technetwork/server-storage/solarisstudio/downloads/index.html and export its location, e.g.
* Install Mercurial, the version control system. You need this to keep up-to-date with the packaging information.<code>pfexec pkg install SUNWmercurial</code>
<syntaxhighlight lang="bash">export SPRO=~/Downloads/SolarisStudio12.3-solaris-x86-bin.tar.bz2</syntaxhighlight>
* Now fetch the repository containing the build information. This is, in spite of its name, the KDE 4.3.0 repository.  The repository is approximately 8MB large at this point.<code>hg clone http://solaris.bionicmutton.org/hg/kde4-specs-42</code>
* Install Mercurial, the version control system. You need this to keep up-to-date with the packaging information.<syntaxhighlight lang="bash">pfexec pkg install developer/versioning/mercurial text/gnu-sed file/gnu-coreutils</syntaxhighlight>
* Do you want to use Sun Studio Express? That's the packaged compiler suite for OpenSolaris. The alternative is to use Sun Studio 12 which is packaged for Nevada, it may have newer bugfixes than Studio Express -- see the installation instructions elsewhere on this page.
* Now fetch the repository containing the build information.<syntaxhighlight lang="bash">hg clone https://hg.code.sf.net/p/kdesolaris/code</syntaxhighlight>
** For Sun Studio Express:<code>cd kde4-specs-42/specs/ ; sh tools/install-be --express</code>
* Set-up a configuration file. Usually it's enough to just
** For Sun Studio 12:<code>cd kde4-specs-42/specs/ ; sh tools/install-be</code>
<syntaxhighlight lang="bash">cd kdesolaris-code/specs/ ; cp tools/build/config.template tools/build/config </syntaxhighlight>
 
* Let a script install all the dependencies and the build environment. <syntaxhighlight lang="bash"> ./tools/install-be</syntaxhighlight>
* Go for a walk, sleep, enjoy the life, send an ironic thank you to the pkg creators<br>
* Go for a walk, sleep, enjoy the life, as pkg is quite slow and has a lot to do (~1 hour)<br>
* Follow the instructions given in the output<br>
* When it's finished, do: <syntaxhighlight lang="bash">bash</syntaxhighlight> so that the new .bashrc is used <br>
* Logout and login to your brand new KDE4.2(3) session
* Run <syntaxhighlight lang="bash">cd ~/src/kde4-specs-470/specs/; make KDEgdm-integration</syntaxhighlight> to start the build (build time may grow up to 24 hours on a decent machine).
 
* Logout and login to your brand new KDE4.x session
* Check [[Projects/KDE_on_Solaris/OpenSolaris/Status|KDE4 on OpenSolaris status page]] for workarounds for some known issues.


== Installing KDE4 IPS packages ==
== Installing KDE4 IPS packages ==


The current KDE4 IPS package server is the machine pkg in the domain bionicmutton.org; the IPS server runs on port 10000. This is a fairly standard IPS setup. The bionicmutton domain is Adriaan's and has been previously used to serve up SysV packages as well. The IPS server is in a VirtualBox at the end of a DSL line, so it's not necessarily up or fast. Eventually we will be moving to a more convention IPS repo like pending/ or contrib/.
The current KDE4 IPS package server is at http://solaris.bionicmutton.org/pkg/4.6.0
This is a fairly standard IPS setup. The bionicmutton domain is Adriaan's and has been previously used to serve up SysV packages as well.
The URL is changing over time, always check the forum (http://www.opensolaris.org/jive/forum.jspa?forumID=187) or IRC (#kde4-solaris) for the latest news.


First you need to set up a pkg authority to be able to get packages from bionicmutton at all. The first line creates the authority; the second fetches a catalog from it and the third checks that at least one of the packages can be found. Only the first is strictly necessary.
To add the kde ips repository:
 
<syntaxhighlight lang="bash">pfexec pkg set-publisher -p http://solaris.bionicmutton.org/pkg/4.6.0</syntaxhighlight>
<code bash>pfexec pkg set-authority \
    -O http://<host.domain>:10000/ bionicmutton
pfexec pkg refresh bionicmutton
pkg search -r KDEgdm-integration</code>


Remember that KDE includes setuid code. Remember that installing packages from untrusted and unsigned third parties is insecure. Remember that the KDE codebase is huge and not extensively tested on OpenSolaris yet. Consider whether you really want to install KDE4 on the machine you're working on. Then decide to do it anyway. You will need KDEbase-apps for things like Konqueror and Konsole, and KDEgdm-integration to be able to choose KDE as a session; other KDE packages may be installed as you need them (such as KDEpim, KDEgames, etc.). There is a KDEconsolidation package as well that pulls in everything we know of.
Remember that KDE includes setuid code. Remember that installing packages from untrusted and unsigned third parties is insecure. Remember that the KDE codebase is huge and not extensively tested on OpenSolaris yet. Consider whether you really want to install KDE4 on the machine you're working on. Then decide to do it anyway. You will need KDEbase-apps for things like Konqueror and Konsole, and KDEgdm-integration to be able to choose KDE as a session; other KDE packages may be installed as you need them (such as KDEpim, KDEgames, etc.). There is a KDEconsolidation package as well that pulls in everything we know of.


<code bash>pfexec pkg install KDEbase-apps \
<syntaxhighlight lang="bash">pfexec pkg install KDEgdm-integration</syntaxhighlight>
    KDEgdm-integration</code>


After installing KDEgdm-integration, you should be able to log out and choose KDE as a session type from the login manager. Then you get a full KDE 4.1.3 desktop. On my machine with Radeon graphics it is very slow to start up and launch applications, but fairly fast after that. There is a discussion on performance tweaking on [email protected].
After installing KDEgdm-integration, you should be able to log out and choose KDE as a session type from the login manager. Then you get a full KDE4 desktop. On my machine with Radeon graphics it is very slow to start up and launch applications, but fairly fast after that. There is a discussion on performance tweaking on [email protected].


Please report problems to [https://bugs.kde.org/wizard.cgi|the KDE bug tracker] with Operating System set to "Solaris". Please check for duplicates [https://bugs.kde.org/buglist.cgi?query_format=advanced&short_desc_type=allwordssubstr&short_desc=&long_desc_type=allwordssubstr&long_desc=&bug_file_loc_type=allwordssubstr&bug_file_loc=&keywords_type=allwords&keywords=&bug_status=UNCONFIRMED&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&op_sys=Solaris&emailtype1=substring&email1=&emailtype2=substring&email2=&bugidtype=include&bug_id=&votes=&chfieldfrom=&chfieldto=Now&chfieldvalue=&cmdtype=doit&order=Reuse+same+sort+as+last+time&field0-0-0=%255BBug+creation%255D&type0-0-0=noop&value0-0-0=] first.
Please report problems to [https://bugs.kde.org/wizard.cgi|the KDE bug tracker] with Operating System set to "Solaris". Please check for duplicates [https://bugs.kde.org/buglist.cgi?query_format=advanced&short_desc_type=allwordssubstr&short_desc=&long_desc_type=allwordssubstr&long_desc=&bug_file_loc_type=allwordssubstr&bug_file_loc=&keywords_type=allwords&keywords=&bug_status=UNCONFIRMED&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&op_sys=Solaris&emailtype1=substring&email1=&emailtype2=substring&email2=&bugidtype=include&bug_id=&votes=&chfieldfrom=&chfieldto=Now&chfieldvalue=&cmdtype=doit&order=Reuse+same+sort+as+last+time&field0-0-0=%255BBug+creation%255D&type0-0-0=noop&value0-0-0=] first.


== Building KDE4 on OpenSolaris ==
== Installing KDE4 IPS packages ==


It is possible to build and install KDE4 on an OpenSolaris machine. It requires much more setup than on a Nevada or Solaris 10 system. You can skip at least some of the CBE setup, but you will have to install lots of other tools and headers. You need the Nevada machine (a VirtualBox will do) because you cannot install SunStudio 12 and patches on OpenSolaris; the available compiler on OpenSolaris (Sun Studio Express) '''does not work''' for KDE4.
The current KDE4 IPS package server is at http://solaris.bionicmutton.org/pkg/4.5.3
This is a fairly standard IPS setup. The bionicmutton domain is Adriaan's and has been previously used to serve up SysV packages as well.
The URL is changing over time, always check the forum (http://www.opensolaris.org/jive/forum.jspa?forumID=187) or IRC (#kde4-solaris) for the latest news.


=== Installing Tools ===
To add the kde ips repository:
<syntaxhighlight lang="bash">pfexec pkg set-publisher -p http://solaris.bionicmutton.org/pkg/4.5.3</syntaxhighlight>


Set up SunStudio 12 ('''not Studio Express''') and patch it up as described on the [[Projects/KDE on Solaris]] page. Tar that up and then extract it on your OpenSolaris machine. This will give you /opt/SUNWspro. Leave that alone.
Remember that KDE includes setuid code. Remember that installing packages from untrusted and unsigned third parties is insecure. Remember that the KDE codebase is huge and not extensively tested on OpenSolaris yet. Consider whether you really want to install KDE4 on the machine you're working on. Then decide to do it anyway. You will need KDEbase-apps for things like Konqueror and Konsole, and KDEgdm-integration to be able to choose KDE as a session; other KDE packages may be installed as you need them (such as KDEpim, KDEgames, etc.). There is a KDEconsolidation package as well that pulls in everything we know of.


You will also need to install more development tools with the following package installation command:
<syntaxhighlight lang="bash">pfexec pkg install KDEgdm-integration</syntaxhighlight>
<code bash>
pfexec pkg install SUNWmercurial \
    SUNWgmake \
    SUNWcurl \
    SUNWgnu-automake-110 \
    SUNWaconf \
    SUNWgnome-common-devel
</code>


And now you need more bits and pieces. The easiest way I've found it to install Studio Express because it drags in whatever it is, and then uninstall Studio Express because you don't really want it.
After installing KDEgdm-integration, you should be able to log out and choose KDE as a session type from the login manager. Then you get a full KDE4 desktop. On my machine with Radeon graphics it is very slow to start up and launch applications, but fairly fast after that. There is a discussion on performance tweaking on [email protected].
<code bash>
pfexec pkg install sunstudioexpress
pfexec pkg uninstall sunstudioexpress
</code>


=== Installing Headers ===
Please report problems to [https://bugs.kde.org/wizard.cgi|the KDE bug tracker] with Operating System set to "Solaris". Please check for duplicates [https://bugs.kde.org/buglist.cgi?query_format=advanced&short_desc_type=allwordssubstr&short_desc=&long_desc_type=allwordssubstr&long_desc=&bug_file_loc_type=allwordssubstr&bug_file_loc=&keywords_type=allwords&keywords=&bug_status=UNCONFIRMED&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&op_sys=Solaris&emailtype1=substring&email1=&emailtype2=substring&email2=&bugidtype=include&bug_id=&votes=&chfieldfrom=&chfieldto=Now&chfieldvalue=&cmdtype=doit&order=Reuse+same+sort+as+last+time&field0-0-0=%255BBug+creation%255D&type0-0-0=noop&value0-0-0=] first.
 
OpenSolaris ships without many of the headers you will need, instead packaging them separately (like the -devel packages in Linux, but with less-consistent naming). You will need at least the following:
<code bash>pfexec pkg install SUNWhea \
    SUNWaudh \
    SUNWsfwhea \
    SUNWxorg-headers</code>
 
=== Installing Other Dependencies ===
 
Although the build will warn you about them much later, you should install the following dependencies (which will also pull in headers) now.
<code bash>
pfexec pkg install SUNWmysql5 \
    SUNWlibmng \
    SUNWgnu-gettext \
    SUNWgnu-libiconv \
    SUNWiconv-unicode \
    SUNWperl-xml-parser \
    SUNWGtk \
    SUNWicu \
    SUNWgnome-media-mp3 \
    SUNWpostgr-83-libs \
    SUNWpostgr-83-devel \
    SUNWcups \
    SUNWlibtool \
    SUNWsvn \
    SUNWbison \
    SUNWflexlex \
    SUNWdoxygen \
    SUNWPython25
</code>
 
=== Configuring Paths ===
 
For consistency, let's set up some standard directories in your home directory. Then we need to set up your build environment -- in this example by adding to your .bash_profile, but you may want to do that differently.
 
<code bash>
mkdir ~/src ~/bin ~/packages
cat >> ~/.bash_profile
PATH=/opt/SUNWspro/bin:/opt/dtbld/bin:$HOME/bin:$PATH:/usr/sbin
CC=/opt/SUNWspro/bin/cc
CXX=/opt/SUNWspro/bin/CC
MAKE=/usr/bin/gmake
export CC CXX MAKE PATH
</code>
 
Don't worry that /opt/dtbld doesn't exist yet. We'll create it shortly. Note that we are adding the Studio12 paths to your environment and also ~/bin, which we will use to override some of the system path defaults.
 
=== Installing CBE Components ===
 
Next, we'll fetch sources for pkgtool and build it. The pkgtool program is used to build SysV packages and is part of the CBE (Common Build Environment). We won't be building all of the CBE, though.
<code bash>cd ~/src
wget http://ovh.dl.sourceforge.net/sourceforge/pkgbuild/pkgbuild-1.3.3.tar.bz2
gtar xvjf pkgbuild-1.3.3.tar.bz2
cd pkgbuild-1.3.3
./configure --prefix=/opt/dtbld
# Lots of output snipped
gmake
# Not much output snipped
pfexec gmake install
# More output snipped
pfexec chgrp bin /opt/dtbld/{bin,lib}
</code>
Check if /opt/dtbld/bin/pkgtool will run; for instance pkgtool --help should do the trick. You can remove ~/src/pkgbuild-1.3.3* now. You need to fix up the groups on bin and lib or the next installations will fail -- suspended for administrative reasons.
 
Next up we will install some other CBE components, using KDE's copy of their specfiles. We need to get the KDE specfile repository for this, though:
<code bash>cd ~/src
hg clone http://solaris.bionicmutton.org/hg/kde4-specs-dev
cd kde4-specs-dev/specs
gmake CBEcmake CBEyasm
</code>
This will build and install cmake 2.6.2 and yasm into /opt/dtbld. The cmake is newer than what CBE 1.7.0 will deliver; yasm is the same as CBE yasm.
 
=== Installing the Rest ===
 
You will need to put some symlinks into your ~/bin (or switch around your PATH, but I think using symlinks is safer). There is a target check-version that will check the versions of installed components and what's in your path and print out a report. Something like this:
 
<code bash>
$ make check-version
! $AUTOMAKE is unset and automake is not in your PATH.
!  Make sure an automake is available (CBEautomake).
! install is not GNU install; make sure GNU install
!  is in your path and can be called as "install"
! System will probably not compile properly.
!  hit ^C now to abort compilation.
</code>
 
It's a good idea to listen to what check-version prints, because it will save you from mysterious compile failures much later. To solve typical problems, we add symlinks in ~/bin as follows:
 
<code bash>
cd ~/bin
ln -s `which automake-1.10` automake
ln -s `which aclocal-1.10` aclocal
ln -s `which ginstall` install
ln -s `which gmake` make
for i in autoconf autoheader autom4te autoreconf
do
    ln -s `which $i` $i
done
</code>
 
=== Configuring the Build ===
 
All of the build action happens in ~/src/kde4-specs-dev/specs, and packages and other build things happen in ~/packages; the latter is configurable through pkgtool's ~/.pkgtoolrc and the former is where you checked out the sources. You still need to configure the build to make it an OpenSolaris build instead of a regular one; the difference is:
- A regular build builds '''all''' of the dependencies in /opt/foss, including many duplicates of packages already installed on the system.
- An OSOL build uses as many of the installed system packages as is feasible.
 
To configure for OSOL, do the following:
<code bash>
cd ~/src/kde4-specs-dev/specs
cat > Makefile.config
PKGTOOL_ARGS=--without-64 --with-osol
</code>
This suppresses 64-bit builds (of limited use if your interest is only KDE, which is going to be built in 32-bit mode anyway) and changes the dependencies to OSOL style. For documentation on what can go in Makefile.config, see the Makefile.
 
Now do a test build of a single package, to see if things work a little:
<code bash>
make FOSShier
</code>
 
=== Building KDE in Four Big Steps ===
 
To break down the build into a few somewhat manageable steps, we distinguish
Qt, KDEgdm-integration, BOOST and KDEconsolidation. Build them in turn:
<code bash>
cd ~/src/kde4-specs-dev/specs
make FOSSqt
make KDEgdm-integration
make FOSSboost
make KDEconsolidation
</code>
Those will pull in the dependencies they need one-by-one. It can take a long time to download and build it all; count on about a day on a modern desktop. Look in Makefile.templates for other interesting targets.
 
== Creating KDE4 IPS packages ==
 
If you want to create your own IPS packages (in order to test them before contributing them to OpenSolaris contrib repo eventually, maybe), you will need to follow a series of steps:
 
=== Enabling your own IPS repo ===
 
You will need a IPS repository running in your machine up & running:
<code bash>
pfexec svccfg -s pkg/server "setprop pkg/port=10000"
pfexec svcadm refresh pkg/server
pfexec svcadm enable pkg/server
</code>
Once you have your own IPS repo listening in localhost, you will need to recognize it as a valid authority from where to install packages:
<code bash>
pfexec pkg set-authority -O http://localhost:10000 localrepo
</code>
You can check that it's configured properly if it appears as a valid IPS repo:
<code bash>
pkg authority
# Some other repos
localrepo                          http://localhost:10000/
</code>
 
=== Creating the IPS packages and commiting them to the repo ===
 
To create the IPS packages, you can use the ips-$PACKAGE target of make, using the following format (for the case of FOSShier):
<code bash>
make ips-FOSShier
</code>
One tool you can use to find out what the direct or indirect dependencies are
for a package is 'show-missing' which is a target in tools/Makefile.admin:
<code bash>
make -f tools/Makefile.admin show-missing TARGET=KDElibs
</code>
 
== Troubleshooting ==
 
=== OSOL System Issues ===
 
Swap - If the build dies claiming fbe is out of free space, it is likely that your swap is too small.  About 1 Gb should be fine, but 2 Gb is recommended.  To set your swap size to 2 Gb, execute the following as root, replacing 'rpool/swap' with the location of your swap partition, given by 'zfs list':
 
<code bash>
pfexec zfs set volsize=2G rpool/swap
</code>
 
Reboot afterward, as the change may not register immediately with the kernel.
 
=== Qt Jambi ===
 
Ant - If the system claims it can't find ant, or CBEant then you need to install JDS-CBE from http://opensolaris.org/os/project/jds/contributing/building/ .  The ANT_HOME is often not set for you, so set it to the following in your shell profile:
 
<code>
export ANT_HOME=/opt/jdsbld
</code>
 
java.lang.OutOfHeapSpaceError - Sometimes the given heap space for the XSLT generation at the beginning of the compile isn't enough and the build stops.  Add the following to your .bashrc or shell profile to increase to a suitable size of 256m:
 
<code>
export ANT_OPTS=-Xmx256m
</code>

Latest revision as of 20:47, 28 July 2015

Warning
The KDE on Solaris project, also KDE on OpenSolaris, was active from around the year 2000 until nearly 2014, when the remaining team members ceased active development of the KDE packages. This page should be considered mostly of historical interest, although nothing stops anyone from trying to re-start KDE packaging on a descendant of Solaris such as IllumOS.


KDE on OpenSolaris is like Projects/KDE on Solaris but with some extra setup steps. There are IPS packages available intermittently.

Status: For an overview of current issues, see the KDE4 on OpenSolaris status page.

Effortless building of KDE 4

export SPRO=~/Downloads/SolarisStudio12.3-solaris-x86-bin.tar.bz2
  • Install Mercurial, the version control system. You need this to keep up-to-date with the packaging information.
    pfexec pkg install developer/versioning/mercurial text/gnu-sed file/gnu-coreutils
    
  • Now fetch the repository containing the build information.
    hg clone https://hg.code.sf.net/p/kdesolaris/code
    
  • Set-up a configuration file. Usually it's enough to just
cd kdesolaris-code/specs/ ; cp tools/build/config.template tools/build/config
  • Let a script install all the dependencies and the build environment.
     ./tools/install-be
    
  • Go for a walk, sleep, enjoy the life, as pkg is quite slow and has a lot to do (~1 hour)
  • When it's finished, do:
    bash
    
    so that the new .bashrc is used
  • Run
    cd ~/src/kde4-specs-470/specs/; make KDEgdm-integration
    
    to start the build (build time may grow up to 24 hours on a decent machine).
  • Logout and login to your brand new KDE4.x session
  • Check KDE4 on OpenSolaris status page for workarounds for some known issues.

Installing KDE4 IPS packages

The current KDE4 IPS package server is at http://solaris.bionicmutton.org/pkg/4.6.0 This is a fairly standard IPS setup. The bionicmutton domain is Adriaan's and has been previously used to serve up SysV packages as well. The URL is changing over time, always check the forum (http://www.opensolaris.org/jive/forum.jspa?forumID=187) or IRC (#kde4-solaris) for the latest news.

To add the kde ips repository:

pfexec pkg set-publisher -p http://solaris.bionicmutton.org/pkg/4.6.0

Remember that KDE includes setuid code. Remember that installing packages from untrusted and unsigned third parties is insecure. Remember that the KDE codebase is huge and not extensively tested on OpenSolaris yet. Consider whether you really want to install KDE4 on the machine you're working on. Then decide to do it anyway. You will need KDEbase-apps for things like Konqueror and Konsole, and KDEgdm-integration to be able to choose KDE as a session; other KDE packages may be installed as you need them (such as KDEpim, KDEgames, etc.). There is a KDEconsolidation package as well that pulls in everything we know of.

pfexec pkg install KDEgdm-integration

After installing KDEgdm-integration, you should be able to log out and choose KDE as a session type from the login manager. Then you get a full KDE4 desktop. On my machine with Radeon graphics it is very slow to start up and launch applications, but fairly fast after that. There is a discussion on performance tweaking on [email protected].

Please report problems to KDE bug tracker with Operating System set to "Solaris". Please check for duplicates [1] first.

Installing KDE4 IPS packages

The current KDE4 IPS package server is at http://solaris.bionicmutton.org/pkg/4.5.3 This is a fairly standard IPS setup. The bionicmutton domain is Adriaan's and has been previously used to serve up SysV packages as well. The URL is changing over time, always check the forum (http://www.opensolaris.org/jive/forum.jspa?forumID=187) or IRC (#kde4-solaris) for the latest news.

To add the kde ips repository:

pfexec pkg set-publisher -p http://solaris.bionicmutton.org/pkg/4.5.3

Remember that KDE includes setuid code. Remember that installing packages from untrusted and unsigned third parties is insecure. Remember that the KDE codebase is huge and not extensively tested on OpenSolaris yet. Consider whether you really want to install KDE4 on the machine you're working on. Then decide to do it anyway. You will need KDEbase-apps for things like Konqueror and Konsole, and KDEgdm-integration to be able to choose KDE as a session; other KDE packages may be installed as you need them (such as KDEpim, KDEgames, etc.). There is a KDEconsolidation package as well that pulls in everything we know of.

pfexec pkg install KDEgdm-integration

After installing KDEgdm-integration, you should be able to log out and choose KDE as a session type from the login manager. Then you get a full KDE4 desktop. On my machine with Radeon graphics it is very slow to start up and launch applications, but fairly fast after that. There is a discussion on performance tweaking on [email protected].

Please report problems to KDE bug tracker with Operating System set to "Solaris". Please check for duplicates [2] first.