Difference between revisions of "Getting Started/Build/kdesrc-build-config"
m (moved Getting Started/Build/kdesrc-buildrc to Getting Started/Build/kdesrc-build-config: make it clear what this article is about. Make it visible that this article is not kdesrc-build.)
|Line 1:||Line 1:|
== kdesvn-buildrc ==
== kdesvn-buildrc ==
=== Creating your configuration ===
=== Creating your configuration ===
Revision as of 03:31, 23 December 2012
Creating your configuration
The kdesvn-build download will include a file called kdesvn-buildrc-sample, which is a sample configuration file suitable for building the KDE Software Compilation (SC).
To create your configuration, it is recommended to use this file as a base since it includes the standard list of KDE modules to build, in the correct order. (You can, of course, add or remove most modules if you like).
You can use any standard text editor to edit this file, such as KWrite, nano, vi, etc.
Once you open the file, you will see that it starts with some comments (on lines beginning with #), and then the world "global". This starts the global configuration for the kdesvn-buildrc, which is used to specify options which are common to all of the modules.
Each option in the global section is specified in the following form:
- option-name value
Many options are already listed, with default values, and comments about the option on top. Some options have more than one sample value listed. In this situation, all but one of these will have comments. If you want to use a different sample option, simply uncomment the line by deleting the '#' at the beginning, and commenting or deleting the other lines with the same option name.
Here's a short listing of some of the important global options:
- source-dir: This option controls where kdesvn-build will download the sources to. In addition, most other directories that kdesvn-build uses will be subdirectories of this directory by default, so it is a kind of "kdesvn-build prefix". The default value is ~/kdesvn, which downloads the source in a subdirectory under your home directory.
- build-dir: This controls where kdesvn-build actually builds the various modules. Normally it is the directory build under your source directory.
- kdedir: This controls where the KDE SC (and the various supporting modules such as kdesupport) get installed to. The default is ~/kde, which installs to your home directory.
- qtdir: This controls where Qt 4 is assumed to be. If you use the qt-copy module, it also controls where qt-copy is installed to. Default is ~/qt4, which installs qt-copy to your home directory.
- cmake-options: This controls what options are passed to CMake for every KDE module. For instance, if you want to enable full debugging information, you could set:
- cmake-options -DCMAKE_BUILD_TYPE=debugfull
- make-options: This is used to pass command line options to the make command, which is what actually performs the build. The most likely option is -jN, where N is the number of jobs to perform at once. If you have a system with more than one CPU, it is recommended to use N = number_of_CPUs + 1. For instance, -j3 on a dual core machine or -j5 on a quad-core. You can lower this number if your system is sluggish during the build, but raising it won't buy you much in build speed.
- make-install-prefix: This is used to allow a program to run make install on your behalf. Normally with would be the sudo program, which is used to perform actions with administrator permissions. You only need this for the following:
- You want to install KDE to the system and not your home directory.
- Some installed files require elevated permissions to work properly (this is true for kdebase, and some files in kdelibs).
If this is the case for you, you can use this option (either globally, or for each module) to run make install using sudo, or su, etc.
After the global options are all done, you'll see the line "end global", which lets kdesvn-build know that all of the global options have been read.
Next in the kdesvn-buildrc are the module options. First off, modules are listed in the file, in the order they are to be built and installed. Each module is listed in the following format:
- module module-name
- end module
The module-name is how kdesvn-build refers to the module. It should match the name of the module you are downloading from the source repository. Base KDE modules are listed in WebSVN. Other modules are also available in WebSVN.
One exception is that modules downloaded from git can have any module name you'd like that isn't already used, as kdesvn-build determines their download location using a specific repository option.
For each module you can specify options, in the same fashion as for the global options. Most of the time, if you set an option for a module, it completely overrides the global option, if any.
However, the cmake-options for a module is added to the global cmake-options, instead of replacing it, which allows you to avoid having to give the same cmake-options for all of your modules.
-DCMAKE_BUILD_TYPE=debugfull globally but wanted Release mode for kdebindings, you could set cmake-options -DCMAKE_BUILD_TYPE=Release for kdebindings.
The qt-copy module is special in that it uses configure-options instead of cmake-options, and it never inherits compilation flags that are set globally, since Qt uses a different build system than KDE software does. The sample kdesvn-buildrc contains a useful set of default configure flags, but if you aren't using qt-copy, you can simply comment the entire qt-copy module out.
Since Nokia's Qt is developed using git instead of Subversion, you must specify the repository option for qt-copy to choose which version of Qt you will use:
|Edition to build||Repository to use|
|Official Nokia Qt||git://gitorious.org/qt/qt.git|
|Slightly modified Qt with KDE-specific patches and bugfixes (recommended if you're going to the trouble anyways)||git://gitorious.org/+kde-developers/qt/kde-qt.git|
Either way you should specify a branch of master to choose the default version.
If you choose kde-qt make sure to look at the README.kde-qt after kdesvn-build downloads the module for you as well!
kdesvn-build will search in several locations for your rc file.
- First, kdesvn-build will look for a file called kdesvn-buildrc in the current directory. Notice that in this situation there is no leading dot on the filename. This allows you to control the build based on what directory you're in, which would be useful for maintaining two different Subversion installs.
- If no kdesvn-buildrc is found, kdesvn-build will look for a ~/.kdesvn-buildrc. Notice there is a leading dot on the filename in this situation. This is the standard Linux/UNIX convention for configuration files stored in the home directory, and marks this as a hidden file. So if you try to find the file in Dolphin or Konqueror, you may need to Show Hidden Files first. This controls the default configuration kdesvn-build will use, no matter what directory you run kdesvn-build from.
- If you specify the --rc-file option to kdesvn-build, kdesvn-build will try to read the given kdesvn-buildrc file instead of the default ones. This is also independent of what directory kdesvn-build is run in. But, you must remember to pass this option every time, so it is only useful for testing or for a one-time-only run.
When you make changes to values in your kdesvn-buildrc, they may not always be picked up immediately. For example, if you change cmake-options but kdesvn-build has no reason to run CMake again, then you'll still be building with your old cmake-options.
The safest way to ensure that a change to your module's options is picked up is to use the --refresh-build option when rebuilding a module. This option causes kdesvn-build to completely rebuild the given module, which includes running cmake and clearing out the build directory.
Using --refresh-build takes the most time. Often, it is enough to use --reconfigure instead of --refresh-build, which runs CMake but does not clear out the build directory. But if --reconfigure doesn't work you'll end up doing --refresh-build anyways.
On the other hand, if you change the svn-server option to move where kdesvn-build is downloading from, you need to run kdesvn-build one time with the --svn-only option, so that kdesvn-build can perform the correct "svn switch" command.
The kdesvn-buildrc file is one of the major reasons to use kdesvn-build instead of building manually, as it will allow you to specify build settings to use all of the time instead of having to always remember to type in the correct command line settings and export the right environment variables. There are many more options than the ones covered here, which are mostly detailed at the kdesvn-build documentation. However, these options are enough to get you a working KDE installation.