Getting Started/Build/Troubleshooting: Difference between revisions

From KDE TechBase
(Must delete the old CMakeCache.txt before any changes to CMAKE_LIBRARY_PATH and CMAKE_INCLUDE_PATH is used)
(same here.. change the order of kdebase and kdepimlibs to emphasize nondependency)
Line 53: Line 53:




== Issues building kdepimlibs ==
If you have trouble compiling kdepimlibs:
* the cmakekde command may require a later version of the gpgme library.  This is available from the project's web site: http://www.gnupg.org/download/index.html - please note that the build of gpgme also requires libgpg-error, also available from the same location.  Both libraries are installed by the "./configure", "make" and "sudo make install" sequence, with the gpgme library configured with the additional "--with-gpg-error-prefix" parameter.  You may need to overwrite your existing "/usr/bin/gpgme-config" file with the newer version for the kdepimlibs to pick up the new install.
* if cmake complains about missing akonadi headers, (CMake Error: Could not find Akonadi includes. or something similiar), then you lack the akonadi package which can be found in the kdesupport module. Since the kdesupport as a whole is quite large it is recommended that you selectively download the packages you need instead of fetching the entire kdesupport module.Akonadi relies on automoc, so we have to install it prior to building akonadi. The Automoc module can also be found in kdesupport.
=== The Recipe for Automoc ===
cd
cs
mkdir kdesupport && cd kdesupport
svn checkout svn://anonsvn.kde.org/home/kde/trunk/kdesupport/automoc
cd automoc
cmakekde
=== The Recipe for Akonadi ===
cd
cs
cd kdesupport
svn checkout svn://anonsvn.kde.org/home/kde/trunk/kdesupport/akonadi
cd akonadi
cmakekde


== Issues building kdebase ==
== Issues building kdebase ==
Line 105: Line 85:


  and delete the CMakeCache.txt in your build directory.  
  and delete the CMakeCache.txt in your build directory.  
== Issues building kdepimlibs ==
If you have trouble compiling kdepimlibs:
* the cmakekde command may require a later version of the gpgme library.  This is available from the project's web site: http://www.gnupg.org/download/index.html - please note that the build of gpgme also requires libgpg-error, also available from the same location.  Both libraries are installed by the "./configure", "make" and "sudo make install" sequence, with the gpgme library configured with the additional "--with-gpg-error-prefix" parameter.  You may need to overwrite your existing "/usr/bin/gpgme-config" file with the newer version for the kdepimlibs to pick up the new install.
* if cmake complains about missing akonadi headers, (CMake Error: Could not find Akonadi includes. or something similiar), then you lack the akonadi package which can be found in the kdesupport module. Since the kdesupport as a whole is quite large it is recommended that you selectively download the packages you need instead of fetching the entire kdesupport module.Akonadi relies on automoc, so we have to install it prior to building akonadi. The Automoc module can also be found in kdesupport.
=== The Recipe for Automoc ===
cd
cs
mkdir kdesupport && cd kdesupport
svn checkout svn://anonsvn.kde.org/home/kde/trunk/kdesupport/automoc
cd automoc
cmakekde
=== The Recipe for Akonadi ===
cd
cs
cd kdesupport
svn checkout svn://anonsvn.kde.org/home/kde/trunk/kdesupport/akonadi
cd akonadi
cmakekde


== Running programs ==
== Running programs ==

Revision as of 10:41, 20 June 2008


Getting_Started/Build/KDE4/Troubleshooting


Building KDE4 From Source/Troubleshooting
Tutorial Series   Getting Started
Previous   KDE SVN Quickstart Guide
What's Next   KDE SVN Quickstart Guide
Further Reading   n/a

This page contains some troubleshooting tips for issues you may encounter while building kde4 from source.

Many of the issues listed here may be out of date.

Issues building kdelibs

If you have problems compiling kdelibs, first make sure the software in the Required Software section above is installed and works. If you install additional software, it may be necessary to remove ~/kde/src/KDE/kdelibs/CMakeCache.txt before trying the build again.

Other possible hints include:

  • If the cmakekde command fails stating that CMake requires an out of source build directory, remove ~/kde/src/KDE/kdelibs/CMakeCache.txt, and try again.

If cmakekde still gives the same error then try this

cd
cmake -DCMAKE_INSTALL_PREFIX=$KDEDIR \
-DCMAKE_BUILD_TYPE=debugfull \
-DKDE4_BUILD_TESTS=ON \
~/kde/src/KDE/kdelibs
make
make install
  • If you received an error stating "Please create a separate build directory and run 'cmake path_to_kdelibs [options]' there.", then you need to change to your build directory before running cmakekde. (e.g cs KDE/kdelibs && cb && cmakekde) If the message stays, run 'svn status' in the kdelibs directory and remove all files labeled with '?'.
  • If Qt wasn't found or the wrong version of Qt was found, make sure that the qmake from the Qt you need is the first qmake in the path.
  • If qmake wasn't found and you are using Debian packages, /usr/bin/qmake probably points to a wrong qmake version. To fix this run as root:
update-alternatives --config qmake
  • If the problems persist, try the CMake make-option --keep-going.
  • Here you need the libungif library, otherwise you will get an error message like "Could NOT find GIF".
  • Qt-4.3 upgrade: if you get a link error in kjsembed talking about QScriptEngine, edit CMakeCache.txt in kdelibs and remove the lines that talk about QT_QTUITOOLS_LIBRARY, then type make again (that static library has a new dependency, and the cmake code that adds it needs to run).
  • if you get CMake Error: KDE Requires Qt to be built with SSL support

, install openssl-devel, remove CMakeCache.txt and re-compile QT.

  • if you get kdelibs/kimgio/ico.cpp:188: undefined reference to `QImage::jumpTable()' it means you compiled QT without QT3 support(no, linking to a true QT3 install won't work)
  • if none of the errors above match yours, you might just try a quick'n'dirty make clean in kdelibs.
  • if you get "The PCRE regular expression library has not been found >=4.5 " then watch out the http://techbase.kde.org/index.php?title=Getting_Started/Build/KDE4/Kubuntu_and_Debian (Getting Started/Build/KDE4/Kubuntu and Debian-> kdelibs dependancies ->Recommended packages ) or

remove ../.. build/kdelibs cs KDE/kdelibs cmakekde

  • [stub] What to do if you have a problem like kde-config.cpp:56: undefined reference to `KLocalizedString::~KLocalizedString()' and

/Depot/Temp/kdelibs-4.0.2/kdecore/kde-config.cpp:197: undefined reference to `KConfigGroup::readPathEntry(char const*, QString const&) const' and kde-config.cpp:66: undefined reference to `ki18n(char const*)'? Seems to happen with some localization stuff



Issues building kdebase

If you have troubles compiling kdebase:

  • XINE is needed to compile kdebase-runtime
  • Make sure you have the libxss headers installed. (Usually you got undefined references on xscreensaver objects if you do not have those headers)
  • which meinproc4 has to deliver /home/kde-devel/kde/bin/meinproc4
  • if cmakekde can not find the path of kdepimlibs, edit the file $KDE_BUILD/KDE/kdebase/CMakeCache.txt and manually set KDEPIMLIBS_INCLUDE_DIR:PATH=$KDE_BUILD/kdepimlibs
  • if you get an error saying "Please set the following variables: X11_XTest_LIB (ADVANCED)", install the devel package of Xtst. On some systems, this is packaged separately from xext and called x11proto-xext-dev or libxtst-dev. You may also need to remove the CMakeCache.txt file in the build dir after installing the package.
  • the same for "X11_Xinerama_LIB (ADVANCED)" where you will need the devel package for xinerama.
  • if you get an error complaining about a missing variable X11_Xrandr_LIB, you need the devel package for libxrandr (libxrandr-devel on ubuntu-systems)
  • if you get the error "Please set the following variables: FONTCONFIG_INCLUDE_DIR, FONTCONFIG_LIBRARIES (ADVANCED)", then you need to install the libfontconfig headers
  • if you get the error "CMake Error: This project requires some variables to be set, and cmake can not find them. Please set the following variables: KMETADATA_LIBRARIES", you need to install soprano from kdesupport and to rebuild kdelibs
  • if you get the error "‘XserverRegion’ does not name a type" make sure you have libxcomposite headers installed (libxcomposite-dev in ubuntu)
  • if you get the error "CMake Error: This project requires some variables to be set, and cmake can not find them. Please set the following variables: QT_QTOPENGL_LIBRARY (ADVANCED) ", try editing CMakeCache.txt and setting QT_QTOPENGL_LIBRARY:FILEPATH=/home/kde-devel/qt-copy/lib/libQtOpenGL.so
  • if you get messages as "KDE4_INSTALL_HANDBOOK() is deprecated. Remove it please. Now all is done in KDE4_CREATE_HANDBOOK." then, either find the files containing the offending line and comment it out manually, or run the following script in ~/kde/src/KDE/kdebase: macros_corrector.sh. It will just REMOVE the line that has "kde4_create_handbook" in it from all the found files.
  • If you get an error (in ubuntu) concerning libxtst.so install the libxtst-dev package
  • If you get the message "kdebase/workspace/kcontrol/kxkb/x11helper.cpp:131: error: ‘KGlobal’ has not been declared", you might need to install libxklavier development packages.
  • If you get "/home/kde-devel/kde/lib/libkio.so: undefined reference to `Strigi::AnalysisResult::AnalysisResult(std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, long, Strigi::IndexWriter&, Strigi::StreamAnalyzer&)'" you probably have an outdated version of strigi installed by your distro. By the way, after update the strigi, you must recompile kdelibs for a new libkio.so.
  • If you get the issue "can't find REQUIRED package Blitz", install qimageblitz4 and qimageblitz-dev
  • If you get an error "class QWebFrame' has no member named 'contentsSize'" you need to upgrade your Qt
  • If you have troubles building networkmanager-0.6, check if you have networkmanager-dev and libnm-util-dev installed
  • If you get during cmake
Please set the following variables:
CLUCENE_LIBRARY_DIR (ADVANCED)

Make sure you have clucene installed and clucene-devel. If necessary, get the source from sourceforge and compile it. If you have SUSE and an x64 installation, you need to make cmake aware your library path is /usr/lib64, not /usr/lib. Do this with

cmake -DLIB_SUFFIX=64 .
  • If you get an error saying your soprano libraries are too old, but you've installed them under kdesupport, check to see if your build is using your system libraries instead. If so, then set:
CMAKE_LIBRARY_PATH=/home/kde-devel/kde/lib:$CMAKE_LIBRARY_PATH
CMAKE_INCLUDE_PATH=/home/kde-devel/kde/include:$CMAKE_INCLUDE_PATH
and delete the CMakeCache.txt in your build directory. 

Issues building kdepimlibs

If you have trouble compiling kdepimlibs:

  • the cmakekde command may require a later version of the gpgme library. This is available from the project's web site: http://www.gnupg.org/download/index.html - please note that the build of gpgme also requires libgpg-error, also available from the same location. Both libraries are installed by the "./configure", "make" and "sudo make install" sequence, with the gpgme library configured with the additional "--with-gpg-error-prefix" parameter. You may need to overwrite your existing "/usr/bin/gpgme-config" file with the newer version for the kdepimlibs to pick up the new install.
  • if cmake complains about missing akonadi headers, (CMake Error: Could not find Akonadi includes. or something similiar), then you lack the akonadi package which can be found in the kdesupport module. Since the kdesupport as a whole is quite large it is recommended that you selectively download the packages you need instead of fetching the entire kdesupport module.Akonadi relies on automoc, so we have to install it prior to building akonadi. The Automoc module can also be found in kdesupport.

The Recipe for Automoc

cd
cs
mkdir kdesupport && cd kdesupport
svn checkout svn://anonsvn.kde.org/home/kde/trunk/kdesupport/automoc
cd automoc
cmakekde

The Recipe for Akonadi

cd
cs
cd kdesupport
svn checkout svn://anonsvn.kde.org/home/kde/trunk/kdesupport/akonadi
cd akonadi
cmakekde

Running programs

  • If you get
KUniqueApplication: Cannot find the D-Bus session server

make sure you can access the display, e.g. type

xclock

then a clock must appear on the screen. If it does and the error persists, start your shell using

dbus-launch xterm

and start your program in there.

  • If you get something like
Error: standard icon theme "oxygen" not found!

ASSERT: "!isEmpty()" in file /home/kde-devel/qt-copy/include/QtCore/../../src/corelib/tools/qlist.h, line 245
Aborted (core dumped)

You need to install kdebase - see above. It is enough to install the "runtime" directory from kdebase.

General troubleshooting

What can happen over time, after some svn up commands, is that some of the tools used in the KDE build chain change their output format. For example, kcfg files are read by kconfig_compiler to produce configuration dialogs. CMake cannot detect those changes, and the compilation might fail. A workaround is to always force a re-generation of all such files:

find $KDE_SRC/KDE/kdebase -name "*.kcfg" | xargs touch

The same applies to ui files as produced by Qt designer.

Locked sessions

When installing KDE 4 as a user, one will not be able to unlock a locked session. To work around this issue you can either:

su chown root.root $KDEDIR/lib/kde4/libexec/kcheckpass

or

chmod 755 $KDEDIR/lib/kde4/libexec/kcheckpass

Also you have to add a "kde" service in /etc/pam.d/ folder

For example for RH/Fedora based distros:

#%PAM-1.0
auth       include      system-auth
account    include      system-auth
password   include      system-auth
session    include      system-auth

while for debian/Kubuntu (requires having libpam-dev installed while building kdebase):

  1. Standard Un*x authentication.

@include common-auth @include common-account @include common-session @include common-password