Getting Started/Build/KDE4: Difference between revisions

Revision as of 06:23, 22 January 2007

Building KDE4 From Source

Tutorial Series	Getting Started
Previous	Anonymous SVN Quickstart Guide
What's Next	Starting a KDE4 Environment and Applications
Further Reading	Instructions for Mac OS X The KDE From Subversion Build Tool Increased Productivity in KDE4 with Scripts

Abstract

This tutorial shows one way to get KDE from trunk running. It consolidates info from several places, e.g. the official KDE developer pages. The official pages may be updated without this page being updated too, so check there if you have problems.

Note

Throughout the tutorial the bash shell is used.

Set up the development user account

useradd kde-devel mkdir /home/kde-devel passwd kde-devel chown kde-devel:kde-devel /home/kde-devel 2>/dev/null || \ chown kde-devel:users /home/kde-devel

Switch to the user kde-devel: (the dash also changes to the new home directory)

su - kde-devel

The kde-devel User's Shell

On some systems a new user is configured by default to use /bin/sh. If this is not the case on your system, you can skip this section. Using /bin/sh can be very inconvenient to work with and you may want to change it to /bin/bash or another shell.

Note

To change the user's default shell you will need write access to /etc/passwd. Usually this means running a command as root.

If your system comes with the usermod application you can run the following command as root: usermod -s /bin/bash.

Another option is to use the vipw application as root to safely edit your /etc/passwd. Locate 'kde-devel' in the the file. Change '/bin/sh' at the end of the line to read '/bin/bash', save your changes and exit.

The new shell will be started automatically when you log in as the kde-devel user again.

Prepare for software setup

Please look also in Getting Started/Increased Productivity in KDE4 with Scripts .

Add these lines to your shell's configuration file, e.g. ~/.bashrc. export YACC='byacc -d' export QTDIR=$HOME/qt-unstable export KDEDIR=$HOME/kde export KDEDIRS=$KDEDIR export DBUSDIR=$KDEDIR export PKG_CONFIG_PATH=$DBUSDIR/lib/pkgconfig:$PKG_CONFIG_PATH export PATH=$QTDIR/bin:$KDEDIR/bin:$PATH export LD_LIBRARY_PATH=$QTDIR/lib:$KDEDIR/lib:$LD_LIBRARY_PATH

Uncomment if dbus doesn't work
alias dbusstart="eval `PATH=$DBUSDIR/bin \
$DBUSDIR/bin/dbus-launch --auto-syntax`"

function cmakekde { cmake -DCMAKE_INSTALL_PREFIX=$KDEDIR \ -DCMAKE_BUILD_TYPE=debugfull $@ && make VERBOSE=1 && make install; }

Now either relogin or activate the settings with: source ~/.bashrc

Set up D-Bus

Skip this if you have D-Bus >=0.93 installed.

wget http://dbus.freedesktop.org/releases/dbus/dbus-1.0.2.tar.gz
tar xvfz dbus-1.0.2.tar.gz
cd dbus-1.0.2/
./configure --disable-qt --disable-qt3 --prefix=$DBUSDIR \
--localstatedir=/var && make && make install
dbus-uuidgen --ensure

Set up CMake

Skip this if you have CMake >=2.4.3 installed.

The default prefix is /usr/local, make sure /usr/local/bin is in your $PATH.

cd
wget http://www.cmake.org/files/v2.4/cmake-2.4.5.tar.gz
tar zxf cmake-2.4.5.tar.gz
mkdir cmake-build
cd cmake-build
../cmake-2.4.5/bootstrap
make
sudo make install

Set up Qt

cd
svn checkout svn://anonsvn.kde.org/home/kde/trunk/qt-copy
cd ~/qt-copy && ./apply_patches && \
./configure -qt-gif -no-exceptions -debug -fast \
-prefix $QTDIR -qdbus && make && make install

Set up kdelibs

cd
svn checkout svn://anonsvn.kde.org/home/kde/trunk/KDE/kdelibs
mkdir kdelibs-build
cd kdelibs-build
cmakekde ../kdelibs

Additional KDE-specific CMake modules

There are additional CMake modules in kdelibs/cmake/modules/ that are necessary for building KDE4 applications. These will be installed for your when kdelibs itself is installed.

Troubleshooting

If you have problems compiling kdelibs, first make sure the following commands can be executed: gcc, g++, pkg-config.

Tip

If you get "Could NOT find GIF", install the devel package of libungif (the actual name may vary between operating systems).

Tip

In order to avoid compilation problems, GCC should be at least of version 4.1. The minimum supported compiler is not yet determined at the time of writing this.

If the problems persist, try the make-option --keep-going

Set up kdepimlibs

Before kdebase you need to install kdepimlibs

cd
svn co svn://anonsvn.kde.org/home/kde/trunk/KDE/kdepimlibs
mkdir kdepimlibs-build
cd kdepimlibs-build
cmakekde ../kdepimlibs

Set up kdebase

You may need kdebase for some kioslaves.

cd
svn co svn://anonsvn.kde.org/home/kde/trunk/KDE/kdebase
mkdir kdebase-build
cd kdebase-build
cmakekde ../kdebase

Troubleshooting

If you have troubles compiling kdebase:

Make sure you have the libxss headers installed. (Usually you got undefined references on xscreensaver objects if you haven't those headers)
which meinproc has to deliver /home/kde-devel/kde/bin/meinproc
if cmakekde cannot find the path of kdepimlibs, edit the file /home/kde-devel/kdebase-build/CMakeCache.txt and manually set KDEPIMLIBS_INCLUDE_DIR:PATH=/home/kde-devel/kdepimlibs-build
if you get an error saying "Please set the following variables: X11_XTest_LIB (ADVANCED)", install the devel package of Xtst. On some systems, this is packaged separately from xext and called x11proto-xext-dev or libxtst-dev. You may also need to remove the CMakeCache.txt file in the build dir after installing the package.
the same for "X11_Xinerama_LIB (ADVANCED)" where you will need the devel package for xinerama.

Success!

You are now ready to start building other svn modules in the same fashion as you built kdebase, running and testing KDE4 or writing your own patches and applications.

See the Starting a KDE4 Environment and Applications tutorial for how to start working on your new KDE4 installation.

Additional notes

Introduction to CMake