Development/Tutorials/Debugging/Using Error Messages: Difference between revisions

    From KDE TechBase
    No edit summary
    No edit summary
    Line 1: Line 1:
     
    = Qt 4 / kdelibs 4 =


    When you start a konsole and type the commands to start an application you
    When you start a konsole and type the commands to start an application you
    Line 65: Line 65:
    Note that you can use ''add_definition(-DKDE_DEFAULT_DEBUG_AREA=<number>)'' in CMakeLists.txt to specify default debug area.
    Note that you can use ''add_definition(-DKDE_DEFAULT_DEBUG_AREA=<number>)'' in CMakeLists.txt to specify default debug area.


    ''Initial Author:'' [mailto:zander@kde.org Thomas Zander]
    = Qt 5 / KDE Frameworks 5 =
     
    <tt>kDebug()</tt> and friends have been deprecated in KDE Frameworks 5, and you should use Qt's built-in debugging instead.  We recommend that you use [http://doc-snapshot.qt-project.org/qt5-stable/qloggingcategory.html QLoggingCategory], particularly for libraries and plugins.  Note that this is only available in Qt 5.2 and later.
     
    In particular, for a library or plugin called "Foo", you should have a common header that contains the following declaration
    #include <QLoggingCategory>
    Q_DECLARE_LOGGING_CATEGORY(LOG_FOO)
    and exactly one source file containing
    Q_LOGGING_CATEGORY(LOG_FOO, "foo")
     
    You should treat the string as something like reverse DNS; it cannot contain spaces, and dots indicate a heirarchy.  For example, a Plasma dataengine called "Foo" might use the category <tt>"plasma.engine.foo"</tt>.
     
    Logging lines then look like
    qCDebug(LOG_FOO) << "Log something:" << stuff();
    qCWarning(LOG_FOO) << "Something bad happened that users (end-users, or application developers using this library) should be aware of";
    qCCritical(LOG_FOO) << "Something happened so bad we had to terminate the application";
     
    With Qt 5.2, the <tt>qCDebug</tt> line will not produce any output; this is because logging categories are disabled by default.  You need to include the line
    QLoggingCategory::setFilterRules(QStringLiteral("foo.debug = true"));
    somewhere in the application code, generally in the <tt>main()</tt> function.  Of course, you would typically disable this call in release versions.  Qt 5.3 will hopefully include a way to change this configuration externally, without recompiling.
     
    If you run your application from within a terminal application, like [http://www.kde.org/applications/system/konsole/ Konsole], you will see the logging output in that terminal window.  Otherwise, it will usually appear in <tt>~/.xsession-errors</tt>.
     
    == Improving Logging Output ==
     
    Qt provides a way of controlling the output of the logging methods via an environment variable.  You can tell it to include the application name and PID, as well as the debugging category, and color-code the text.  For example, running the following lines in your shell will produce something that looks quite like <tt>kDebug</tt>'s colored output:
    c=`echo -e "\033"`
    export QT_MESSAGE_PATTERN="%{appname}(%{pid})/(%{category}) $c\[31m%{if-debug}$c\[34m%{endif}%{function}$c\[0m: %{message}"
    unset c
     
    == Managing Lots of Output ==
     
    If you have lots of debugging statements, they may appear too fast and leave the terminal window before you can read them.  There are three main ways to deal with this:
    # [http://doc-snapshot.qt-project.org/qt5-stable/qloggingcategory.html#setFilterRules Disable some logging categories] to limit the amount of output generated
    # Increase the amount of scrollback in the terminal so that output is not lost; in Konsole, you can go to <tt>Settings > Edit Current Profile...</tt> and click on the <tt>Scrollback</tt> tab to change this.  Konsole also has a useful search feature: just press <tt>Ctrl+Shift+F</tt> or click <tt>Find...</tt> on the <tt>Edit</tt> menu.
    # Save the output to a file; <tt>tee</tt> is useful for this.  For example, you can run <pre>application 2&gt;&amp;1 | tee debug.log</pre> to save the output to the file <tt>debug.log</tt> while still viewing it in the terminal.

    Revision as of 17:21, 25 November 2013

    Qt 4 / kdelibs 4

    When you start a konsole and type the commands to start an application you will see all sorts of statements are printed in the konsole while the application is running. All applications print these messages, to look at them you have to know where to look. The application will have to be compiled with the debugging enabled. So using a precompiled package from a distribution probably will not give you this information. If you compiled the application yourself, make sure the configure option --disable-debug was not used.

    In KDE all debugging text-output can be switched on or off based on so called areas. One application can be one or more area. One part of the kde base libraries can be another area. Enabling/disabling these areas from being printed can be done using the kdebugdialog application. For simple debugging selecting all sections is probably wise.

    When you are debugging it is best to simply start a konsole and start the application from there. In a konsole you could simply type:

    kicker
    

    and in the konsole kicker could return a message like:

    ERROR: kicker is already running!
    

    When a lot of output is written to the konsole it might go out of view before you could read it, therefor it is easy to create a text file which contains all this information, to do so type the following:

    application 2>&1 | tee debug.log
    

    where 'application' can be replaced with the application you are debugging. Afterwards you could open the file 'debug.log' to look at the messages again.

    If you are NOT starting the application from a konsole the messages will be logged somewhere else, or they could have been discarded by the program that started your application.

    If your application is started by clicking on an icon your best bet is to check the following log files. Beware; they contain logs for a lot of applications, not just the application you are debugging!

    Case 1: Graphical login (i.e. kdm, gdm, xdm, etc.)

    The debug messages get redirected into the file ~/.xsession-errors or ~/.X.err in your home directory (that is with a leading dot '.' also watch the Capital).

    Case 2: You are using startx:

    Use the following command to restart your session:

    startx 2>&1 | tee startx.log
    

    so that all the debug messages of applications started at KDE's startup (and any application launched from the panel etc.) go to the file "startx.log"

    Links

    The debug messages are usually printed in C++ with the kDebug or kWarning statement. Example:

    kDebug(1210) << "arbitrary message";
    kWarning(1210) << "this rather should not happen";
    

    The number 1210 (so called debug area) in this case represents kicker. You can omit the number.

    See also: kDebug/kWarning API documentation and kdebug.areas for list of debug areas numbers. Note that you can use add_definition(-DKDE_DEFAULT_DEBUG_AREA=<number>) in CMakeLists.txt to specify default debug area.

    Qt 5 / KDE Frameworks 5

    kDebug() and friends have been deprecated in KDE Frameworks 5, and you should use Qt's built-in debugging instead. We recommend that you use QLoggingCategory, particularly for libraries and plugins. Note that this is only available in Qt 5.2 and later.

    In particular, for a library or plugin called "Foo", you should have a common header that contains the following declaration

    #include <QLoggingCategory>
    Q_DECLARE_LOGGING_CATEGORY(LOG_FOO)
    

    and exactly one source file containing

    Q_LOGGING_CATEGORY(LOG_FOO, "foo")
    

    You should treat the string as something like reverse DNS; it cannot contain spaces, and dots indicate a heirarchy. For example, a Plasma dataengine called "Foo" might use the category "plasma.engine.foo".

    Logging lines then look like

    qCDebug(LOG_FOO) << "Log something:" << stuff();
    qCWarning(LOG_FOO) << "Something bad happened that users (end-users, or application developers using this library) should be aware of";
    qCCritical(LOG_FOO) << "Something happened so bad we had to terminate the application";
    

    With Qt 5.2, the qCDebug line will not produce any output; this is because logging categories are disabled by default. You need to include the line

    QLoggingCategory::setFilterRules(QStringLiteral("foo.debug = true"));
    

    somewhere in the application code, generally in the main() function. Of course, you would typically disable this call in release versions. Qt 5.3 will hopefully include a way to change this configuration externally, without recompiling.

    If you run your application from within a terminal application, like Konsole, you will see the logging output in that terminal window. Otherwise, it will usually appear in ~/.xsession-errors.

    Improving Logging Output

    Qt provides a way of controlling the output of the logging methods via an environment variable. You can tell it to include the application name and PID, as well as the debugging category, and color-code the text. For example, running the following lines in your shell will produce something that looks quite like kDebug's colored output:

    c=`echo -e "\033"`
    export QT_MESSAGE_PATTERN="%{appname}(%{pid})/(%{category}) $c\[31m%{if-debug}$c\[34m%{endif}%{function}$c\[0m: %{message}"
    unset c
    

    Managing Lots of Output

    If you have lots of debugging statements, they may appear too fast and leave the terminal window before you can read them. There are three main ways to deal with this:

    1. Disable some logging categories to limit the amount of output generated
    2. Increase the amount of scrollback in the terminal so that output is not lost; in Konsole, you can go to Settings > Edit Current Profile... and click on the Scrollback tab to change this. Konsole also has a useful search feature: just press Ctrl+Shift+F or click Find... on the Edit menu.
    3. Save the output to a file; tee is useful for this. For example, you can run
      application 2>&1 | tee debug.log
      to save the output to the file debug.log while still viewing it in the terminal.