We zijn het er allemaal over eens dat er heel veel KDE-programma's zijn die geschreven moeten worden. Maar er zijn ook veel bestaande KDE-programma's die je hulp nodig hebben.
Om te zien waar hulp nodig is, kun je deze pagina bekijken.
Voordat je een nieuwe applicatie start, is het altijd een goed idee om te kijken op KDE-Apps.org voor bestaande programma's, en op de kde-devel-maillijst te vragen of er nog niemand aan een soortgelijk project is begonnen.
Alhoewel Calligra en KDevelop zeer geliefd zijn, hebben ze maar weinig ontwikkelaars; je kunt daar eens kijken. Je hoeft geen ontwikkelaar van de KDE-werkruimte of het KDE-platform te zijn om mee te helpen. KDE-software is erg modulair, dus je kunt makkelijk één gebied verbeteren zonder te weten hoe de andere werken.
Je kunt ook vragen op kde-devel of iemand je hulp nodig heeft. Gebruik de nieuwste versie van je favoriete KDE-programma, en kijk waar er dingen nog ontbreken. Een themagenerator? Een Konsole-schemabewerker? Een spel dat verbeterd moet worden? Er is altijd wel iets wat beter kan. Implementeer dat!
Ben je bekend met een specifiek vakgebied? Kijk dan of er een gerelateerde applicatie is die je hulp kan gebruiken. Of schrijf er zelf een. KDE verwelkomt vooral wat meer applicaties die niet zijn gericht op experts.
Er zijn heel veel taken waarvoor geen ontwikkel-vaardigheden nodig zijn. Schrijf recenties van applicaties om publiciteit voor KDE te genereren (zie de maillijst kde-promo), help het documentatieteam (zie i18n.kde.org/doc), help de vertalers (zie i18n.kde.org), of help met het sorteren van de binnenkomende bug-rapporten (zie bugs.kde.org).
Een SDK voor Konqi is te vinden op ftp.kde.org/pub/kde/devel/konqi_sdk.tar.bz2
Deze stond eerst op artist.kde.org, maar deze site werd niet langer bijgehouden.
Meer afbeeldingen zijn te vinden op KDE-plaatjes.
You need to know C++. Read the Qt tutorials and browse the Qt docs to get familiar with what's available with Qt. Then read the KDE tutorials and browse architecture and documentation. You can also read the KDE Book, it can not harm. But you don't have to be familiar with the whole KDE architecture to become a kde developer. Using kde's technologies is quite easy, so concentrate on what you really need, you can learn the other bits later on. KDE TechBase and doc.qt.nokia.com (also in your $QTDIR/doc/html) are invaluable resources, take advantage of them. Then, browse the source, look for the examples directories, see how the other did code their applications. Reading and writing code is the best way to learn.
See the "Building and Running KDE Software From Source" section on the Getting_Started page.
[miscellany] global-ignores = *.moc *.moc.cc *.moc.cpp config.log config.status \ config.cache *.gmo .deps .libs SunWS_cache *.lo *.la *.rpo *.la.closure \ *_la_closure.cpp *_la_closure.cc *_la_closure.cxx *.all_cc.cc *.all_cpp.cpp \ *.all_C.C *.all_cxx.cxx *_meta_unload.cc *_meta_unload.h *_meta_unload.cpp \ *_meta_unload.C *_meta_unload.cxx index.cache.bz2 .memdump Makefile.rules.in \ Makefile.calls.in Makefile.rules Makefile.calls autom4te.cache *.kidl \ *.o *.lo *.la #*# .*.rej *.rej *.pyc
En verder, om svn diff witruimte te laten negeren en functienamen te laten weergeven:
[helpers] diff-cmd = /usr/local/bin/_svndiff
met het volgende in /usr/local/bin/_svndiff:
#!/bin/sh exec /usr/bin/diff -b -u -p "$@"
Vergeet niet om /usr/local/bin/_svndiff uitvoerbaar te maken.
There are three requirements:
See also the next question.
As core developer Waldo Bastian explains in a copyrighted mail:
Being part of KDE means that you have to work together with others. Such cooperation brings along advantages but it also brings along responsibilities.
- Some of those advantages are: your code ends up on all distro's, people might fix your bugs, you get free translations and documentation, you get tons of bugreports.
On the other side there are disadvantages and responsibilities: you will have to communicate with other developers about your work, other people might make changes to your code, you will have to respect release freezes, you get tons of bugreports and people actually expect that you fix them as well (what are they smoking?), people expect you to maintain your code.
You can't chose for the advantages and ignore the responsibilities that come with it, it's a complete package, it's both or nothing.
In general it should be the author of a piece of software that chooses to put his application in KDE's repositories. We usually don't put software in KDE's repositories unless the author wishes to do so. The other way around, if the author prefers to work on his application elsewhere then that's his right as well. Unless there is a split in the actual group of people working on the application it makes no sense to fork the development of an application because of that.
BUT... by putting your code under and open source license and putting it in a KDE repository you give the world at large, as well as KDE in particular, the irrevocable right to use your code. And KDE will use that right at its discretion to protect the interests of KDE, even if that goes against the wishes of the author at that point in time.
It is important to know that but don't be afraid. Usually, things work very well. In 5 years, it has only happened once that a developer had his work put kept in KDE while he wanted to remove it.
See full article at Contribute > Get a KDE Contributor Account.
Go to [KDE Identity] , fill out the form and describe why you need write access. Make sure to specify your full name and e-mail address.
Please also include the name of your bugs.kde.org account, if non-existent please create one so that it can be given usual developer rights. Closing bugs.kde.org reports with keywords in commit comments only works if the email address of your KDE Identity and bugs.kde.org accounts match. You can change your bugs.kde.org address in the Bugzilla user settings.
Git requires use of an ssh key, and new accounts for SVN must also choose the svn+ssh protocol. Send a public ssh key (e.g. ~/.ssh/id_dsa.pub)
See also #How do I create a SSH key?
Although there are few restrictions on repository commit rights, we expect you not to disrupt other developers' code without their consent. You must also respect the feature freezes of the release schedule (published on developer.kde.org)
A detailed list of rules you should follow when committing to KDE repositories are listed in the KDE Commit Policy.
As a first step, we can put it in playground, which is essentially "kde-alpha". Develop it there and when it is ready, request that your app to be moved to the appropriate KDE package or the extragear module.
This is no longer possible with Subversion. Maybe in the future, if the server is upgraded and allows that. Note that for git this is not an issue.
It contains Qt bindings for Ruby, PHP, C# to use Qt classes with those langages, KDE bindings for Ruby, C#, python to use KDE classes with those langages, and XParts to embed non-KDE apps as a KPart. Check the binding page of TechBase.
No, playground are not a released packages. The same is true for kdereview and extragear: they are not frozen and released. But if you want your app to move to a package, ask for it before the beta-release.
Yes, check the Building 2 Versions documentation.
kde-config and all kde programs accept --version as argument.
For instance, to get only reaktivate from playground/utils:
svn co -N /playground/utils; svn up reaktivate
Then compile as usual.
The same answer applies to the question "How do I get a single language out of kde-i18n?".
You can do that from your Subversion commit. To do so, append to your commit message a line like this:
BUG: XXXXX where XXXXX is the bug report you want to close. If the report you're closing is adding a new feature, you can use FEATURE instead of BUG.
Generate a key pair for each major location you work from. This helps to reduce the impact when your key gets stolen. When someone obtains access to your private key, your key can be abused in attempts to compromise KDE servers. Well known open source projects have been compromised this way in the past, YOU must help us to make sure that this doesn't happen with KDE servers as well. For that reason it is important to notify sysadmin (at) kde (dot) org immediately when you notice that someone may have had access to your private key for example when a computer on which it was stored has been hacked or infected with a virus, worm or trojan.
If you choose to make a backup of your SSH private key data, please ensure that any such backup is stored in a secure manner as well.
For the practical part, the following command can be used to generate a SSH private/public key pair with
ssh-keygen -t dsa
This will create a private key as ~/.ssh/id_dsa and a public key as ~/.ssh/id_dsa.pub.
There are times when you may want to use a key of a different name to the default, perhaps to use separate keys for different projects. To let SSH know which key you want to use for KDE.org, you can keep a list of servers and their corresponding keys in ~/.ssh/config. For example,
Host svn.kde.org IdentityFile ~/.ssh/id_dsa_kde
The kde-commits mailinglist carries automatic notifications for all changes made in the KDE repositories. The KDE-Commits mailinglist is very high traffic. An alternative is CommitFilter which allows you to get notification for only those areas that interest you.