Development/FAQs/General FAQ/fr: Difference between revisions

    From KDE TechBase
    (Created page with "Vous devez connaître le C++. Lisez le [http://qt-project.org/doc/qt-4.8/tutorials.html tutoriel Qt] et parcourez la documentation Qt pour être familier avec ce qui est dispo...")
    (Created page with "Voyez la section Ecrire et exécuter du logiciel KDE à partir des sources sur la page S...")
    Line 37: Line 37:
    == Comment obtenir le logiciel KDE à partir des dépôts Git KDE ou SVN ? ==
    == Comment obtenir le logiciel KDE à partir des dépôts Git KDE ou SVN ? ==


    See the [[Special:myLanguage/Getting_Started#Building_and_Running_KDE_Software_From_Source|Building and Running KDE Software From Source]] section on the [[Special:myLanguage/Getting_Started|Getting Started]] page.
    Voyez la section [[Special:myLanguage/Getting_Started#Building_and_Running_KDE_Software_From_Source|Ecrire et exécuter du logiciel KDE à partir des sources]] sur la page [[Special:myLanguage/Getting_Started|Pour commencer]] .


    == Puis-je accéder en ligne au code source KDE source ? ==
    == Puis-je accéder en ligne au code source KDE source ? ==

    Revision as of 17:07, 7 May 2018

    Je veux commencer cette nouvelle application. Que me conseillez-vous ?

    Nous sommes tous d'accord qu'il y a plein d'applications KDE à écrire. Mais il y a aussi beaucoup d'applications KDE existantes qui réclament votre assistance.

    Pour voir les domaines qui ont besoin d'aide, allez voir cette page.

    Avant de démarrer une nouvelle application, il est toujours bon d'aller voir sur KDE-Apps.org et sur d'autres services d'hébergement de logiciels en sources libres comme GitHub, Google Code, et SourceForge pour voir la liste des applications existantes et de demander à la liste de diffusion du developpement KDE si quelqu'un travaille déja sur un projet similaire.

    Je suis un développeur, comment puis-je contribuer au logiciel KDE ?

    Calligra et KDevelop, bien qu'étant très populaires, ont très peu de développeurs , vous pourriez donc aller voir là-bas. Il n'est pas utile d'être un développeur d'espaces de travail KDE ou de bibliothèques pour la plateforme KDE pour apporter votre aide. L'éventail complet du logiciel KDE est très modulaire et donc vous pouvez parfaitement améliorer un domaine sans connaître le fonctionnement des autres.

    Vous pouvez aussi demander sur kde-devel si quelqu'un a besoin d'aide sur une application. Utilisez la dernière version de votre logiciel KDE favorit et identifiez les besoins nécessaires. Un générateur de thème ? Un éditeur de schema en mode console ? Améliorer un jeu ? Il y a toujours un petit détail qui manque. Allez-y et implémentez-le !

    Etes-vous familier ou attiré par un domaine spécifique ? Regardez s'il existe une application qui pourrait requierir votre aide. Ou écrivez-en une. KDE accueille plus d'applications qui n'émanent pas de férus.

    Je ne suis pas développeur, comment puis-je aider ?

    There are plenty of tasks that don't require development skills. Write reviews of applications for the promoting of KDE (see the kde-promo mailing-list), help the documentation team (see i18n.kde.org/doc), help the translations (see i18n.kde.org), help to filter the incoming bugs (see bugs.kde.org).

    Où puis-je trouver des images de Konqi le dragon ?

    The Konqi for some people SDK is at ftp.kde.org/pub/kde/devel/konqi_sdk.tar.bz2
    It was posted to artist.kde.org before that site ceased to be updated.

    Further images are on KDE merchandise. Also you can find some unofficial Konqi images and models from Create Konqi with Krita Contest and SuperTuxKart game.

    Quel est le niveau requis pour contribuer à KDE ? Que devrais-je apprendre ? Que devrais-je lire ?

    Vous devez connaître le C++. Lisez le tutoriel Qt et parcourez la documentation Qt pour être familier avec ce qui est disponible dans Qt. Ensuite lisez les tutoriels KDE et parcourez l'architecture et la documentation. Vous pouvez aussi lire le livre KDE, ça ne peut pas faire de mal. Mais vous ne devez pas être familier avec toute l'architecture de KDE pour être un développeur KDE. Utiliser les technologies KDE est très facile, aussi concentrez vous sur ce dont vous avez réellement besoin, vous pourrez apprendre les autres choses plus tard. KDE TechBase et doc.qt.digia.com (aussi dans votre $QTDIR/doc/html) sont des ressources inestimables, tirez-en avantage. Ensuite, ouvrez les sources, cherchez les répertoires d'exemples, regardez comment les autres ont codé leurs applications. Lire et écrire du code est le meilleur moyen d'apprendre.

    Comment obtenir le logiciel KDE à partir des dépôts Git KDE ou SVN ?

    Voyez la section Ecrire et exécuter du logiciel KDE à partir des sources sur la page Pour commencer .

    Puis-je accéder en ligne au code source KDE source ?

    Yes. There are many ways to do this:

    Que dois-je mettre dans mon .subversion/config ?

    You need to add the ignore list to the [miscellany] group in your ~/.subversion/config:

    [miscellany]
    global-ignores = *.moc *.moc.cc *.moc.cpp config.log config.status \
    config.cache *.gmo .deps .libs SunWS_cache *.lo *.la *.rpo *.la.closure \
    *_la_closure.cpp *_la_closure.cc *_la_closure.cxx *.all_cc.cc *.all_cpp.cpp \
    *.all_C.C *.all_cxx.cxx *_meta_unload.cc *_meta_unload.h *_meta_unload.cpp \
    *_meta_unload.C *_meta_unload.cxx index.cache.bz2 .memdump Makefile.rules.in \
    Makefile.calls.in Makefile.rules Makefile.calls autom4te.cache *.kidl \
    *.o *.lo *.la #*# .*.rej *.rej *.pyc
    

    Et pour demander à svn diff d'ignorer les espaces,et d'imprimer les noms des fonctions :

    [helpers]
    diff-cmd = /usr/local/bin/_svndiff
    

    avec la suite dans /usr/local/bin/_svndiff:

    #!/bin/sh
    exec /usr/bin/diff -b -u -p "$@"
    

    N'oubliez pas de rendre /usr/local/bin/_svndiff exécutable.

    Je voudraits mettre mon application dans KDE

    There are three requirements:

    • Your app must compile with the latest version of KDE (git master or SVN trunk).
    • Your app must be stable.
    • Your app must be maintained. You will probably get a good deal of bug reports and wishes. People expect you to fix the bugs and implement the wishes that make sense.

    See also the next question.

    Est-il préférable de développer dans ou en dehors de KDE ?

    As core developer Waldo Bastian explains in a copyrighted mail:

    Being part of KDE means that you have to work together with others. Such cooperation brings along advantages but it also brings along responsibilities.

    Some of those advantages are: your code ends up on all distro's, people might fix your bugs, you get free translations and documentation, you get tons of bugreports.

    On the other side there are disadvantages and responsibilities: you will have to communicate with other developers about your work, other people might make changes to your code, you will have to respect release freezes, you get tons of bugreports and people actually expect that you fix them as well (what are they smoking?), people expect you to maintain your code.

    You can't chose for the advantages and ignore the responsibilities that come with it, it's a complete package, it's both or nothing.

    In general it should be the author of a piece of software that chooses to put his application in KDE's repositories. We usually don't put software in KDE's repositories unless the author wishes to do so. The other way around, if the author prefers to work on his application elsewhere then that's his right as well. Unless there is a split in the actual group of people working on the application it makes no sense to fork the development of an application because of that.

    BUT... by putting your code under and open source license and putting it in a KDE repository you give the world at large, as well as KDE in particular, the irrevocable right to use your code. And KDE will use that right at its discretion to protect the interests of KDE, even if that goes against the wishes of the author at that point in time.

    It is important to know that but don't be afraid. Usually, things work very well. In 5 years, it has only happened once that a developer had his work put kept in KDE while he wanted to remove it.

    How do I get write access to KDE repositories?

    See full article at Get a KDE Contributor Account.

    Go to KDE Identity, fill out the form and describe why you need write access. Make sure to specify your full name and e-mail address.

    Please also include the name of your bugs.kde.org account, if non-existent please create one so that it can be given usual developer rights. Closing bugs.kde.org reports with keywords in commit comments only works if the email address of your KDE Identity and bugs.kde.org accounts match. You can change your bugs.kde.org address in the Bugzilla user settings.

    Git requires use of an ssh key, and new accounts for SVN must also choose the svn+ssh protocol. Send a public ssh key (e.g. ~/.ssh/id_dsa.pub)

    See also #How do I create a SSH key?

    If you are contributing to an application that is not yours, it is a good idea to first submitting your coding as patches to the author and let him apply them. If the author is not maintaining his application, you might become the new maintainer...

    Although there are few restrictions on repository commit rights, we expect you not to disrupt other developers' code without their consent. You must also respect the feature freezes of the release schedule (published on Schedules page)

    A detailed list of rules you should follow when committing to KDE repositories are listed in the KDE Commit Policy.

    My app is not stable but I would like to have it in KDE

    As a first step, we can put it in playground, which is essentially "kde-alpha". Develop it there and when it is ready, request that your app to be moved to the appropriate KDE package or the extragear module.

    I don't want to lose my SVN history.

    This is no longer possible with Subversion. Maybe in the future, if the server is upgraded and allows that. Note that for git this is not an issue.

    What is kdebindings?

    It contains Qt bindings for Ruby, PHP, C# to use Qt classes with those langages, KDE bindings for Ruby, C#, python to use KDE classes with those langages, and XParts to embed non-KDE apps as a KPart. Check the binding page of TechBase.

    Does the feature freeze apply to playground?

    No, playground are not a released packages. The same is true for kdereview and extragear: they are not frozen and released. But if you want your app to move to a package, ask for it before the beta-release.

    Puis-je avoir une version stable et une version instable de KDE sur le même ordinateur ?

    Yes, check Building KDE Software from git.kde.org video series:

    How do I know which version of Qt/KDE I am using?

    kde-config and all KDE programs accept --version as argument.

    Qt-copy or Qt from qt.digia.com: if one were doing a clean build of trunk, which would be preferable?

    You can use either. They are binary compatible (forward and backward). There can be, however, a few bugfixes in qt-copy over the most recent Qt release. Especially if building from qt-copy, pay attention to the apply-patches script.

    How can I checkout a single directory from a SVN module?

    Checkout the top-level dir with 'svn co -N /modulename', 'cd modulename', 'svn up admin' to get the admin/ dir and then finally checkout the dir you want with 'svn up subdir'

    For instance, to get only reaktivate from playground/utils: svn co -N /playground/utils; svn up reaktivate Then compile as usual.

    The same answer applies to the question "How do I get a single language out of kde-i18n?".

    If you don't know the name of the directory you want to check out, you can browse websvn.kde.org to find it.

    How can I get one of the KDE application as a standalone tarball?

    kdesdk/scripts/svn2dist is a script to extract an application from the KDE source tree and package it as a standalone application.

    Comment fermer mes propres rapports de bogue ?

    If you reported a bug that is fixed in a new release of KDE but is still reported as open, you can close it. It might happen because your bug is the same as another one, or simply because the developer fixed something without noticing that it would correct your bug.

    You can do that from your Subversion commit. To do so, append to your commit message a line like this:

    BUG: XXXXX where XXXXX is the bug report you want to close. If the report you're closing is adding a new feature, you can use FEATURE instead of BUG.

    Managing a bug list is a huge task for the developers and they usually have a lot of bugs listed, some being fixed already without their knowledge, some being unreproducible, some without enough information to be corrected, etc. If you can help by managing and updating the list of outstanding bugs, you will be gladly welcome. And you will receive an even happier welcome if you provide a patch.

    How do I create a SSH key?

    SSH makes use of two keys: a private key and a public key. You should keep the private key secret at all times and only place it on machines over which you have direct control. Public, shared, and community machines are not suitable environments to store SSH private keys. Take action to help prevent theft of your SSH private key data. Setting a password on your SSH private key will help reduce the risks involved with private key theft.

    Generate a key pair for each major location you work from. This helps to reduce the impact when your key gets stolen. When someone obtains access to your private key, your key can be abused in attempts to compromise KDE servers. Well known open source projects have been compromised this way in the past, YOU must help us to make sure that this doesn't happen with KDE servers as well. For that reason it is important to notify sysadmin (at) kde (dot) org immediately when you notice that someone may have had access to your private key for example when a computer on which it was stored has been hacked or infected with a virus, worm or trojan.

    If you choose to make a backup of your SSH private key data, please ensure that any such backup is stored in a secure manner as well.

    For the practical part, the following command can be used to generate a SSH private/public key pair with ssh-keygen -t dsa This will create a private key as ~/.ssh/id_dsa and a public key as ~/.ssh/id_dsa.pub.

    There are times when you may want to use a key of a different name to the default, perhaps to use separate keys for different projects. To let SSH know which key you want to use for KDE.org, you can keep a list of servers and their corresponding keys in ~/.ssh/config. For example,

    Host svn.kde.org 
    IdentityFile ~/.ssh/id_dsa_kde

    In order to use SSH to access KDE servers you need to send your public key to sysadmin (at) kde (dot) org.

    How can I monitor changes made by others?

    The kde-commits mailinglist carries automatic notifications for all changes made in the KDE repositories. The KDE-Commits mailinglist is very high traffic. An alternative is CommitFilter which allows you to get notification for only those areas that interest you.