Development/Architecture/DCOP: Difference between revisions

From KDE TechBase
No edit summary
 
(16 intermediate revisions by 5 users not shown)
Line 14: Line 14:
== Demotivation and Background ==
== Demotivation and Background ==


'''Note that new features may not be developed for DCOP. The successor for DCOP is DBUS'''
'''Note that new features may not be developed for DCOP. The successor for DCOP is D-Bus'''


The motivation behind building a protocol like DCOP is simple.  For
The motivation behind building a protocol like DCOP is simple.  For
Line 62: Line 62:


Any data that will be sent is serialized (marshalled, for you CORBA
Any data that will be sent is serialized (marshalled, for you CORBA
fellows) using the built-in QDataStream operators available in all of
fellows) using the built-in {{qt3|QDataStream}} operators available in all of
the Qt classes.  This is fast and easy.  In fact it's so little work
the Qt classes.  This is fast and easy.  In fact it's so little work
that you can easily write the marshalling code by hand. In addition,
that you can easily write the marshalling code by hand. In addition,
Line 76: Line 76:
==== Establishing the Connection ====
==== Establishing the Connection ====


KApplication has gained a method called "KApplication::dcopClient()"
{{class|KApplication|kdelibs|3.5}} has gained a method called "KApplication::dcopClient()"
which returns a pointer to a DCOPClient instance.  The first time this
which returns a pointer to a DCOPClient instance.  The first time this
method is called, the client class will be created.  DCOPClients have
method is called, the client class will be created.  {{class|DCOPClient|kdelibs|3.5}}s have
unique identifiers attached to them which are based on what
unique identifiers attached to them which are based on what
KApplication::name() returns.  In fact, if there is only a single
KApplication::name() returns.  In fact, if there is only a single
Line 96: Line 96:
case:
case:


/*
 
  * returns the appId that is actually registered, which _may_ be
<syntaxhighlight lang="cpp-qt">
  * different from what you passed
/*
  */
* returns the appId that is actually registered, which _may_ be
appId = client-&gt;registerAs(kApp-&gt;name());
* different from what you passed
*/
appId = client -> registerAs (kApp -> name());
</syntaxhighlight>


If you never retrieve the DCOPClient pointer from KApplication, the
If you never retrieve the DCOPClient pointer from KApplication, the
Line 138: Line 141:


In order to actually get the data to the remote client, it must be
In order to actually get the data to the remote client, it must be
"serialized" via a QDataStream operating on a QByteArray. This is how
"serialized" via a {{qt3|QDataStream}} operating on a {{qt3|QByteArray}}. This is how
the data parameter is "built". A few examples will make clear how this
the data parameter is "built". A few examples will make clear how this
works.
works.
Line 148: Line 151:
or not.
or not.


QByteArray data;
<syntaxhighlight lang="cpp-qt">
QDataStream arg(data, IO_WriteOnly);
QByteArray data;
arg &lt;&lt; 5;
QDataStream arg(data, IO_WriteOnly);
if (!client-&gt;send("someAppId", "fooObject/barObject", "doIt(int)",
arg << 5;
                      data))
if (!client -> send ("someAppId", "fooObject/barObject", "doIt(int)",
    qDebug("there was some error using DCOP.");
                    data))
    qDebug ("there was some error using DCOP.");
</syntaxhighlight>


OK, now let's say we wanted to get the data back from the remotely
OK, now let's say we wanted to get the data back from the remotely
Line 161: Line 166:
communication was successful.
communication was successful.


QByteArray data, replyData;
<syntaxhighlight lang="cpp-qt">
QCString replyType;
QByteArray data, replyData;
QDataStream arg(data, IO_WriteOnly);
QCString replyType;
arg &lt;&lt; 5;
QDataStream arg (data, IO_WriteOnly);
if (!client-&gt;call("someAppId", "fooObject/barObject", "doIt(int)",
arg << 5;
                      data, replyType, replyData))
if (!client -> call ("someAppId", "fooObject/barObject", "doIt(int)",
    qDebug("there was some error using DCOP.");
                    data, replyType, replyData))
else {
    qDebug("there was some error using DCOP.");
    QDataStream reply(replyData, IO_ReadOnly);
else {
    if (replyType == "QString") {
    QDataStream reply (replyData, IO_ReadOnly);
        QString result;
    if (replyType == "QString") {
        reply &gt;&gt; result;
        QString result;
        print("the result is: %s",result.latin1());
        reply >> result;
    } else
        print ("the result is: %s", result. latin1());
        qDebug("doIt returned an unexpected type of reply!");
    } else
}
        qDebug ("doIt returned an unexpected type of reply!");
}
</syntaxhighlight>


''N.B.:'' You cannot call() a method belonging to an application which has
''N.B.:'' You cannot call() a method belonging to an application which has
Line 187: Line 194:


Since KDE 3.1 there is an even easier way to make a DCOP call:
Since KDE 3.1 there is an even easier way to make a DCOP call:
DCOPRef. Then you only need to create a DCOPRef to the object
{{class|DCOPRef|kdelibs|3.5}}. Then you only need to create a DCOPRef to the object
and as long as the function does not use unusual argument types,
and as long as the function does not use unusual argument types,
calling the function is as easy as this:
calling the function is as easy as this:


DCOPRef barObject("someAppId", "fooObject/barObject");
<syntaxhighlight lang="cpp-qt">
DCOPReply reply = barObject.call("doIt", 5);
DCOPRef barObject ("someAppId", "fooObject/barObject");
if (!reply.isValid())
DCOPReply reply = barObject. call ("doIt", 5);
    qDebug("there was some error using DCOP.");
if (!reply. isValid())
else {
    qDebug("there was some error using DCOP.");
    print("the result is: %s", ((QString)reply).latin1());
else {
}
    print("the result is: %s", ((QString)reply). latin1());
}
</syntaxhighlight>


==== Receiving Data via DCOP ====
==== Receiving Data via DCOP ====
Line 216: Line 225:
an example implementation.
an example implementation.


bool BarObject::process(const QCString &amp;fun, const QByteArray &amp;data,
<syntaxhighlight lang="cpp-qt">
                        QCString &amp;replyType, QByteArray &amp;replyData)
bool BarObject:: process (const QCString &fun, const QByteArray &data,
{
                        QCString &replyType, QByteArray &replyData)
    if (fun == "doIt(int)") {
{
        QDataStream arg(data, IO_ReadOnly);
    if (fun == "doIt(int)") {
        int i; // parameter
        QDataStream arg (data, IO_ReadOnly);
        arg &gt;&gt; i;
        int i; // parameter
        QString result = self-&gt;doIt (i);
        arg >> i;
        QDataStream reply(replyData, IO_WriteOnly);
        QString result = self -> doIt (i);
        reply &lt;&lt; result;
        QDataStream reply (replyData, IO_WriteOnly);
        replyType = "QString";
        reply << result;
        return true;
        replyType = "QString";
    } else {
        return true;
        qDebug("unknown function call to BarObject::process()");
    } else {
        return false;
        qDebug ("unknown function call to BarObject::process()");
    }
        return false;
}
    }
}
</syntaxhighlight>


==== Processing Received Calls with Transactions ====
==== Processing Received Calls with Transactions ====
Line 249: Line 260:
Such code could like this:
Such code could like this:


bool BarObject::process(const QCString &amp;fun, const QByteArray &amp;data,
<syntaxhighlight lang="cpp-qt">
                        QCString &amp;, QByteArray &amp;)
bool BarObject::process(const QCString &fun, const QByteArray &data,
{
                        QCString &, QByteArray &)
    if (fun == "doIt(int)") {
{
        QDataStream arg(data, IO_ReadOnly);
    if (fun == "doIt(int)") {
        int i; // parameter
        QDataStream arg (data, IO_ReadOnly);
        arg &gt;&gt; i;
        int i; // parameter
        QString result = self-&gt;doIt(i);
        arg >> i;
        QString result = self -> doIt(i);
        DCOPClientTransaction *myTransaction;
 
        myTransaction = kapp-&gt;dcopClient()-&gt;beginTransaction();
        DCOPClientTransaction *myTransaction;
        myTransaction = kapp -> dcopClient() -> beginTransaction();
        // start processing...
 
        // Calls slotProcessingDone when finished.
        // start processing...
        startProcessing( myTransaction, i);
        // Calls slotProcessingDone when finished.
        startProcessing (myTransaction, i);
        return true;
 
    } else {
        return true;
        qDebug("unknown function call to BarObject::process()");
    } else {
        return false;
        qDebug("unknown function call to BarObject::process()");
    }
        return false;
}
    }
}
   
   
slotProcessingDone(DCOPClientTransaction *myTransaction, const QString &amp;result)
slotProcessingDone(DCOPClientTransaction *myTransaction, const QString &result)
{
{
    QCString replyType = "QString";
    QCString replyType = "QString";
    QByteArray replyData;
    QByteArray replyData;
    QDataStream reply(replyData, IO_WriteOnly);
    QDataStream reply(replyData, IO_WriteOnly);
    reply &lt;&lt; result;
    reply << result;
    kapp-&gt;dcopClient()-&gt;endTransaction(myTransaction, replyType, replyData);
    kapp  
}
-> dcopClient() -> endTransaction(myTransaction, replyType, replyData);
}
</syntaxhighlight>


==== DCOP Signals ====
==== DCOP Signals ====
Line 325: Line 339:
; Example:
; Example:


QByteArray params;
<syntaxhighlight lang="cpp-qt">
QDataStream stream(params, IO_WriteOnly);
QByteArray params;
stream &lt;&lt; pid;
QDataStream stream (params, IO_WriteOnly);
kapp-&gt;dcopClient()-&gt;emitDCOPSignal("clientDied(pid_t)", params);
stream << pid;
kapp -> dcopClient() -> emitDCOPSignal ("clientDied(pid_t)", params);
</syntaxhighlight>


The task manager of the KDE panel connects to this signal. It uses an  
The task manager of the KDE panel connects to this signal. It uses an  
Line 336: Line 352:
; Example:
; Example:


connectDCOPSignal(0, 0, "clientDied(pid_t)", "clientDied(pid_t)", false);
<syntaxhighlight lang="cpp-qt">
connectDCOPSignal (0, 0, "clientDied(pid_t)", "clientDied(pid_t)", false);
</syntaxhighlight>


It connects the clientDied(pid_t) signal to its own clientDied(pid_t) DCOP
It connects the clientDied(pid_t) signal to its own clientDied(pid_t) DCOP
Line 344: Line 362:
of the signal. E.g. it is allowed to connect the clientDied(pid_t) signal to
of the signal. E.g. it is allowed to connect the clientDied(pid_t) signal to
a clientDied(void) DCOP function.
a clientDied(void) DCOP function.


=== Using the dcopidl compiler ===
=== Using the dcopidl compiler ===
Line 362: Line 379:
; Example:
; Example:


#ifndef MY_INTERFACE_H
<syntaxhighlight lang="cpp-qt">
#define MY_INTERFACE_H
#ifndef MY_INTERFACE_H
#define MY_INTERFACE_H
#include &lt;dcopobject.h&gt;
 
#include <dcopobject.h>
class MyInterface : virtual public DCOPObject
 
{
class MyInterface : virtual public DCOPObject
    K_DCOP
{
    K_DCOP
    k_dcop:
 
    k_dcop:
        virtual ASYNC myAsynchronousMethod(QString someParameter) = 0;
 
        virtual QRect mySynchronousMethod() = 0;
        virtual ASYNC myAsynchronousMethod (QString someParameter) = 0;
};
        virtual QRect mySynchronousMethod() = 0;
};
#endif
 
#endif
</syntaxhighlight>


As you can see, you're essentially declaring an abstract base class, which
As you can see, you're essentially declaring an abstract base class, which
virtually inherits from DCOPObject.
virtually inherits from DCOPObject.


If you're using the standard KDE build scripts, then you can simply
If you're using the standard KDE build scripts, then you can simply add this file (which you would call {{path|MyInterface.h}}) to your sources directory. Then you edit your {{path|Makefile.am}}, adding 'MyInterface.skel' to your SOURCES list and {{path|MyInterface.h}} to include_HEADERS.
add this file (which you would call MyInterface.h) to your sources
directory. Then you edit your Makefile.am, adding 'MyInterface.skel'
to your SOURCES list and MyInterface.h to include_HEADERS.


The build scripts will use dcopidl to parse MyInterface.h, converting
The build scripts will use dcopidl to parse {{path|MyInterface.h}}, converting it to an XML description in {{path|MyInterface.kidl}}. Next, a file called {{path|MyInterface_skel.cpp}} will automatically be created, compiled and linked with your binary.
it to an XML description in MyInterface.kidl. Next, a file called
MyInterface_skel.cpp will automatically be created, compiled and
linked with your binary.


The next thing you have to do is to choose which of your classes will
The next thing you have to do is to choose which of your classes will implement the interface described in {{path|MyInterface.h}}. Alter the inheritance of this class such that it virtually inherits from {{path|MyInterface}}. Then add declarations to your class interface similar to those on {{path|MyInterface.h}}, but virtual, not pure virtual.
implement the interface described in MyInterface.h. Alter the inheritance
of this class such that it virtually inherits from MyInterface. Then
add declarations to your class interface similar to those on MyInterface.h,
but virtual, not pure virtual.


; Example:
; Example:


class MyClass: public QObject, virtual public MyInterface
<syntaxhighlight lang="cpp-qt">
{
class MyClass: public QObject, virtual public MyInterface
    Q_OBJECT
{
    Q_OBJECT
    public:
 
        MyClass();
    public:
        ~MyClass();
        MyClass();
        ~MyClass();
        ASYNC myAsynchronousMethod(QString someParameter);
 
        QRect mySynchronousMethod();
        ASYNC myAsynchronousMethod(QString someParameter);
};
        QRect mySynchronousMethod();
};
</syntaxhighlight>


Note: (Qt issue) Remember that if you are inheriting from QObject, you must
Note: (Qt issue) Remember that if you are inheriting from {{qt3|QObject}}, you must place it first in the list of inherited classes.
place it first in the list of inherited classes.


In the implementation of your class' ctor, you must explicitly initialize
In the implementation of your class' ctor, you must explicitly initialize
Line 422: Line 432:
; Example:
; Example:


MyClass::MyClass()
<syntaxhighlight lang="cpp-qt">
  : QObject(),
MyClass::MyClass()
    DCOPObject("MyInterface")
  : QObject(),
{
    DCOPObject("MyInterface")
    // whatever...
{
}
    // whatever...
}
</syntaxhighlight>


Now you can simply implement the methods you have declared in your interface,
Now you can simply implement the methods you have declared in your interface,
Line 434: Line 446:
; Example:
; Example:


void MyClass::myAsynchronousMethod(QString someParameter)
<syntaxhighlight lang="cpp-qt">
{
void MyClass::myAsynchronousMethod(QString someParameter)
    qDebug("myAsyncMethod called with param `" + someParameter + "'");
{
}
    qDebug("myAsyncMethod called with param `" + someParameter + "'");
}
</syntaxhighlight>


It is not necessary (though very clean) to define an interface as an
It is not necessary (though very clean) to define an interface as an
Line 443: Line 457:
just as well have defined a k_dcop section directly within MyClass:
just as well have defined a k_dcop section directly within MyClass:


class MyClass: public QObject, virtual public DCOPObject
<syntaxhighlight lang="cpp-qt">
{
class MyClass: public QObject, virtual public DCOPObject
    Q_OBJECT
{
    K_DCOP
    Q_OBJECT
    K_DCOP
    public:
 
        MyClass();
    public:
        ~MyClass();
        MyClass();
        ~MyClass();
    k_dcop:
 
        ASYNC myAsynchronousMethod(QString someParameter);
    k_dcop:
        QRect mySynchronousMethod();
        ASYNC myAsynchronousMethod(QString someParameter);
};
        QRect mySynchronousMethod();
};
</syntaxhighlight>


In addition to skeletons, dcopidl2cpp also generate stubs. Those make
In addition to skeletons, dcopidl2cpp also generate stubs. Those make
it easy to call a DCOP interface without doing the marshalling
it easy to call a DCOP interface without doing the marshalling
manually. To use a stub, add MyInterface.stub to the SOURCES list of
manually. To use a stub, add {{path|MyInterface.stub}} to the SOURCES list of
your Makefile.am. The stub class will then be called MyInterface_stub.
your {{path|Makefile.am}}. The stub class will then be called MyInterface_stub.


=== Inter-user communication ===
=== Inter-user communication ===
Line 498: Line 514:


Code:
Code:
#include &lt;kapp.h&gt;
<syntaxhighlight lang="cpp-qt">
#include <kapp.h>
int main(int argc, char **argv)
 
{
int main (int argc, char **argv)
    KApplication *app;
{
    KApplication *app;
    app = new KApplication(argc, argv, "testit");
 
    return app-&gt;exec();
    app = new KApplication (argc, argv, "testit");
}
    return app -> exec();
}
</syntaxhighlight>


Compiled with:
Compiled with:
Line 561: Line 579:


[[Category:KDE3]]
[[Category:KDE3]]
[[Category:Architecture]]

Latest revision as of 00:20, 5 March 2016

DCOP: Desktop COmmunications Protocol

Preston Brown <[email protected]> October 14, 1999

Revised and extended by Matthias Ettrich <[email protected]> Mar 29, 2000

HTMLized by Hans Meine Hans Meine <[email protected]> May 25, 2000

Added a DCOPRef example: Tim Jansen May 12, 2003

Demotivation and Background

Note that new features may not be developed for DCOP. The successor for DCOP is D-Bus

The motivation behind building a protocol like DCOP is simple. For the past year, we have been attempting to enable interprocess communication between KDE applications. KDE already has an extremely simple IPC mechanism called KWMcom, which is (was!) used for communicating between the panel and the window manager for instance. It is about as simple as it gets, passing messages via X Atoms. For this reason it is limited in the size and complexity of the data that can be passed (X atoms must be small to remain efficient) and it also makes it so that X is required. CORBA was thought to be a more effective IPC/RPC solution. However, after a year of attempting to make heavy use of CORBA in KDE, we have realized that it is a bit slow and memory intensive for simple use. It also has no authentication available.

What we really needed was an extremely simple protocol with basic authorization, along the lines of MIT-MAGIC-COOKIE, as used by X. It would not be able to do NEARLY what CORBA was able to do, but for the simple tasks required it would be sufficient. Some examples of such tasks might be an application sending a message to the panel saying, "I have started, stop displaying the 'application starting' wait state," or having a new application that starts query to see if any other applications of the same name are running. If they are, simply call a function on the remote application to create a new window, rather than starting a new process.

Implementation

DCOP is a simple IPC/RPC mechanism built to operate over sockets. Either unix domain sockets or tcp/ip sockets are supported. DCOP is built on top of the Inter Client Exchange (ICE) protocol, which comes standard as a part of X11R6 and later. It also depends on Qt, but beyond that it does not require any other libraries. Because of this, it is extremely lightweight, enabling it to be linked into all KDE applications with low overhead.

Model

The model is simple. Each application using DCOP is a client. They communicate to each other through a DCOP server, which functions like a traffic director, dispatching messages/calls to the proper destinations. All clients are peers of each other.

Two types of actions are possible with DCOP: "send and forget" messages, which do not block, and "calls," which block waiting for some data to be returned.

Any data that will be sent is serialized (marshalled, for you CORBA fellows) using the built-in QDataStream operators available in all of the Qt classes. This is fast and easy. In fact it's so little work that you can easily write the marshalling code by hand. In addition, there's a simple IDL-like compiler available (dcopidl and dcopidl2cpp) that generates stubs and skeletons for you. Using the dcopidl compiler has the additional benefit of type safety.

This HOWTO describes the manual method first and covers the dcopidl compiler later.

Managing DCOP Connections Manually

Establishing the Connection

KApplication has gained a method called "KApplication::dcopClient()" which returns a pointer to a DCOPClient instance. The first time this method is called, the client class will be created. DCOPClients have unique identifiers attached to them which are based on what KApplication::name() returns. In fact, if there is only a single instance of the program running, the appId will be equal to KApplication::name().

To actually enable DCOP communication to begin, you must use DCOPClient::attach(). This will attempt to attach to the DCOP server. If no server is found or there is any other type of error, attach() will return false. KApplication will catch a dcop signal and display an appropriate error message box in that case.

After connecting with the server via DCOPClient::attach(), you need to register this appId with the server so it knows about you. Otherwise, you are communicating anonymously. Use the DCOPClient::registerAs(const QCString &name) to do so. In the simple case:


/*
 * returns the appId that is actually registered, which _may_ be
 * different from what you passed
 */
appId = client -> registerAs (kApp -> name());

If you never retrieve the DCOPClient pointer from KApplication, the object will not be created and thus there will be no memory overhead.

You may also detach from the server by calling DCOPClient::detach(). If you wish to attach again you will need to re-register as well. If you only wish to change the ID under which you are registered, simply call DCOPClient::registerAs() with the new name.

KUniqueApplication automatically registers itself to DCOP. If you are using KUniqueApplication you should not attach or register yourself, this is already done. The appId is by definition equal to kapp->name(). You can retrieve the registered DCOP client by calling kapp->dcopClient().

Sending Data to a Remote Application

To actually communicate, you have one of two choices. You may either call the "send" or the "call" method. Both methods require three identification parameters: an application identifier, a remote object, a remote function. Sending is asynchronous (i.e. it returns immediately) and may or may not result in your own application being sent a message at some point in the future. Then "send" requires one and "call" requires two data parameters.

The remote object must be specified as an object hierarchy. That is, if the toplevel object is called "fooObject" and has the child "barObject", you would reference this object as "fooObject/barObject". Functions must be described by a full function signature. If the remote function is called "doIt", and it takes an int, it would be described as "doIt(int)". Please note that the return type is not specified here, as it is not part of the function signature (or at least the C++ understanding of a function signature). You will get the return type of a function back as an extra parameter to DCOPClient::call(). See the section on call() for more details.

In order to actually get the data to the remote client, it must be "serialized" via a QDataStream operating on a QByteArray. This is how the data parameter is "built". A few examples will make clear how this works.

Say you want to call "doIt" as described above, and not block (or wait for a response). You will not receive the return value of the remotely called function, but you will not hang while the RPC is processed either. The return value of send() indicates whether DCOP communication succeeded or not.

QByteArray data;
QDataStream arg(data, IO_WriteOnly);
arg << 5;
if (!client -> send ("someAppId", "fooObject/barObject", "doIt(int)",
                     data))
    qDebug ("there was some error using DCOP.");

OK, now let's say we wanted to get the data back from the remotely called function. You have to execute a call() instead of a send(). The returned value will then be available in the data parameter "reply". The actual return value of call() is still whether or not DCOP communication was successful.

QByteArray data, replyData;
QCString replyType;
QDataStream arg (data, IO_WriteOnly);
arg << 5;
if (!client -> call ("someAppId", "fooObject/barObject", "doIt(int)",
                     data, replyType, replyData))
    qDebug("there was some error using DCOP.");
else {
    QDataStream reply (replyData, IO_ReadOnly);
    if (replyType == "QString") {
        QString result;
        reply >> result;
        print ("the result is: %s", result. latin1());
    } else
        qDebug ("doIt returned an unexpected type of reply!");
}

N.B.: You cannot call() a method belonging to an application which has registered with an unique numeric id appended to its textual name (see dcopclient.h for more info). In this case, DCOP would not know which application it should connect with to call the method. This is not an issue with send(), as you can broadcast to all applications that have registered with appname-<numeric_id> by using a wildcard (e.g. 'konsole-*'), which will send your signal to all applications called 'konsole'.

Since KDE 3.1 there is an even easier way to make a DCOP call: DCOPRef. Then you only need to create a DCOPRef to the object and as long as the function does not use unusual argument types, calling the function is as easy as this:

DCOPRef barObject ("someAppId", "fooObject/barObject");
DCOPReply reply = barObject. call ("doIt", 5);
if (!reply. isValid())
    qDebug("there was some error using DCOP.");
else {
    print("the result is: %s", ((QString)reply). latin1());
}

Receiving Data via DCOP

Currently the only real way to receive data from DCOP is to multiply inherit from the normal class that you are inheriting (usually some sort of QWidget subclass or QObject) as well as the DCOPObject class. DCOPObject provides one very important method: DCOPObject::process(). This is a pure virtual method that you must implement in order to process DCOP messages that you receive. It takes a function signature, QByteArray of parameters, and a reference to a QByteArray for the reply data that you must fill in.

Think of DCOPObject::process() as a sort of dispatch agent. In the future, there will probably be a precompiler for your sources to write this method for you. However, until that point you need to examine the incoming function signature and take action accordingly. Here is an example implementation.

bool BarObject:: process (const QCString &fun, const QByteArray &data,
                        QCString &replyType, QByteArray &replyData)
{
    if (fun == "doIt(int)") {
        QDataStream arg (data, IO_ReadOnly);
        int i; // parameter
        arg >> i;
        QString result = self -> doIt (i);
        QDataStream reply (replyData, IO_WriteOnly);
        reply << result;
        replyType = "QString";
        return true;
    } else {
        qDebug ("unknown function call to BarObject::process()");
        return false;
    }
}

Processing Received Calls with Transactions

If your applications is able to process incoming function calls right away the above code is all you need. When your application needs to do more complex tasks you might want to do the processing out of 'process' function call and send the result back later when it becomes available.

For this you can ask your DCOPClient for a transactionId. You can then return from the 'process' function and when the result is available finish the transaction. In the mean time your application can receive incoming DCOP function calls from other clients.

Such code could like this:

bool BarObject::process(const QCString &fun, const QByteArray &data,
                        QCString &, QByteArray &)
{
    if (fun == "doIt(int)") {
        QDataStream arg (data, IO_ReadOnly);
        int i; // parameter
        arg >> i;
        QString result = self -> doIt(i);

        DCOPClientTransaction *myTransaction;
        myTransaction = kapp -> dcopClient() -> beginTransaction();

        // start processing...
        // Calls slotProcessingDone when finished.
        startProcessing (myTransaction, i);

        return true;
    } else {
        qDebug("unknown function call to BarObject::process()");
        return false;
    }
}
 
slotProcessingDone(DCOPClientTransaction *myTransaction, const QString &result)
{
    QCString replyType = "QString";
    QByteArray replyData;
    QDataStream reply(replyData, IO_WriteOnly);
    reply << result;
    kapp 
-> dcopClient() -> endTransaction(myTransaction, replyType, replyData);
}

DCOP Signals

Sometimes a component wants to send notifications via DCOP to other components but does not know which components will be interested in these notifications. One could use a broadcast in such a case but this is a very crude method. For a more sophisticated method DCOP signals have been invented.

DCOP signals are very similair to Qt signals, there are some differences though. A DCOP signal can be connected to a DCOP function. Whenever the DCOP signal gets emitted, the DCOP functions to which the signal is connected are being called. DCOP signals are, just like Qt signals, one way. They do not provide a return value.

A DCOP signal originates from a DCOP Object/DCOP Client combination (sender). It can be connected to a function of another DCOP Object/DCOP Client combination (receiver).

There are two major differences between connections of Qt signals and connections of DCOP signals. In DCOP, unlike Qt, a signal connections can have an anonymous sender and, unlike Qt, a DCOP signal connection can be non-volatile.

With DCOP one can connect a signal without specifying the sending DCOP Object or DCOP Client. In that case signals from any DCOP Object and/or DCOP Client will be delivered. This allows the specification of certain events without tying oneself to a certain object that implementes the events.

Another DCOP feature are so called non-volatile connections. With Qt signal connections, the connection gets deleted when either sender or receiver of the signal gets deleted. A volatile DCOP signal connection will behave the same. However, a non-volatile DCOP signal connection will not get deleted when the sending object gets deleted. Once a new object gets created with the same name as the original sending object, the connection will be restored. There is no difference between the two when the receiving object gets deleted, in that case the signal connection will always be deleted.

A receiver can create a non-volatile connection while the sender doesn't (yet) exist. An anonymous DCOP connection should always be non-volatile.

The following example shows how KLauncher emits a signal whenever it notices that an application that was started via KLauncher terminates.

Example
QByteArray params;
QDataStream stream (params, IO_WriteOnly);
stream << pid;
kapp -> dcopClient() -> emitDCOPSignal ("clientDied(pid_t)", params);

The task manager of the KDE panel connects to this signal. It uses an anonymous connection (it doesn't require that the signal is being emitted by KLauncher) that is non-volatile:

Example
connectDCOPSignal (0, 0, "clientDied(pid_t)", "clientDied(pid_t)", false);

It connects the clientDied(pid_t) signal to its own clientDied(pid_t) DCOP function. In this case the signal and the function to call have the same name. This isn't needed as long as the arguments of both signal and receiving function match. The receiving function may ignore one or more of the trailing arguments of the signal. E.g. it is allowed to connect the clientDied(pid_t) signal to a clientDied(void) DCOP function.

Using the dcopidl compiler

dcopidl makes setting up a DCOP server easy. Instead of having to implement the process() method and unmarshalling (retrieving from QByteArray) parameters manually, you can let dcopidl create the necessary code on your behalf.

This also allows you to describe the interface for your class in a single, separate header file.

Writing an IDL file is very similar to writing a normal C++ header. An exception is the keyword 'ASYNC'. It indicates that a call to this function shall be processed asynchronously. For the C++ compiler, it expands to 'void'.

Example
#ifndef MY_INTERFACE_H
#define MY_INTERFACE_H

#include <dcopobject.h>

class MyInterface : virtual public DCOPObject
{
    K_DCOP

    k_dcop:

        virtual ASYNC myAsynchronousMethod (QString someParameter) = 0;
        virtual QRect mySynchronousMethod() = 0;
};

#endif

As you can see, you're essentially declaring an abstract base class, which virtually inherits from DCOPObject.

If you're using the standard KDE build scripts, then you can simply add this file (which you would call MyInterface.h) to your sources directory. Then you edit your Makefile.am, adding 'MyInterface.skel' to your SOURCES list and MyInterface.h to include_HEADERS.

The build scripts will use dcopidl to parse MyInterface.h, converting it to an XML description in MyInterface.kidl. Next, a file called MyInterface_skel.cpp will automatically be created, compiled and linked with your binary.

The next thing you have to do is to choose which of your classes will implement the interface described in MyInterface.h. Alter the inheritance of this class such that it virtually inherits from MyInterface. Then add declarations to your class interface similar to those on MyInterface.h, but virtual, not pure virtual.

Example
class MyClass: public QObject, virtual public MyInterface
{
    Q_OBJECT

    public:
        MyClass();
        ~MyClass();

        ASYNC myAsynchronousMethod(QString someParameter);
        QRect mySynchronousMethod();
};

Note: (Qt issue) Remember that if you are inheriting from QObject, you must place it first in the list of inherited classes.

In the implementation of your class' ctor, you must explicitly initialize those classes from which you are inheriting from. This is, of course, good practise, but it is essential here as you need to tell DCOPObject the name of the interface which your are implementing.

Example
MyClass::MyClass()
  : QObject(),
    DCOPObject("MyInterface")
{
    // whatever...
}

Now you can simply implement the methods you have declared in your interface, exactly the same as you would normally.

Example
void MyClass::myAsynchronousMethod(QString someParameter)
{
    qDebug("myAsyncMethod called with param `" + someParameter + "'");
}

It is not necessary (though very clean) to define an interface as an abstract class of its own, like we did in the example above. We could just as well have defined a k_dcop section directly within MyClass:

class MyClass: public QObject, virtual public DCOPObject
{
    Q_OBJECT
    K_DCOP

    public:
        MyClass();
        ~MyClass();

    k_dcop:
        ASYNC myAsynchronousMethod(QString someParameter);
        QRect mySynchronousMethod();
};

In addition to skeletons, dcopidl2cpp also generate stubs. Those make it easy to call a DCOP interface without doing the marshalling manually. To use a stub, add MyInterface.stub to the SOURCES list of your Makefile.am. The stub class will then be called MyInterface_stub.

Inter-user communication

Sometimes it might be interesting to use DCOP between processes belonging to different users, e.g. a frontend process running with the user's id, and a backend process running as root.

To do this, two steps have to be taken:

  • both processes need to talk to the same DCOP server
  • proper authentication must be ensured

For the first step, you simply pass the server address (as found in .DCOPserver) to the second process. For the authentication, you can use the ICEAUTHORITY environment variable to tell the second process where to find the authentication information. (Note that this implies that the second process is able to read the authentication file, so it will probably only work if the second process runs as root. If it should run as another user, a similar approach to what kdesu does with xauth must be taken. In fact, it would be a very good idea to add DCOP support to kdesu!)

For example

ICEAUTHORITY=~user/.ICEauthority kdesu root -c kcmroot -dcopserver `cat ~user/.DCOPserver`

will, after kdesu got the root password, execute kcmroot as root, talking to the user's dcop server.

NOTE: DCOP communication is not encrypted, so please do not pass important information around this way.


Performance Tests

A few back-of-the-napkin tests folks:

Code:

#include <kapp.h>

int main (int argc, char **argv)
{
    KApplication *app;

    app = new KApplication (argc, argv, "testit");
    return app -> exec();
}

Compiled with:

g++ -O2 -o testit testit.cpp -I$QTDIR/include -L$QTDIR/lib -lkdecore

on Linux yields the following memory use statistics:

VmSize:     8076 kB
VmLck:         0 kB
VmRSS:      4532 kB
VmData:      208 kB
VmStk:        20 kB
VmExe:         4 kB
VmLib:      6588 kB

If I create the KApplication's DCOPClient, and call attach() and registerAs(), it changes to this:

VmSize:     8080 kB
VmLck:         0 kB
VmRSS:      4624 kB
VmData:      208 kB
VmStk:        20 kB
VmExe:         4 kB
VmLib:      6588 kB

Basically it appears that using DCOP causes 100k more memory to be resident, but no more data or stack. So this will be shared between all processes, right? 100k to enable DCOP in all apps doesn't seem bad at all. :)

OK now for some timings. Just creating a KApplication and then exiting (i.e. removing the call to KApplication::exec) takes this much time:

0.28user 0.02system 0:00.32elapsed 92%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (1084major+62minor)pagefaults 0swaps

I.e. about 1/3 of a second on my PII-233. Now, if we create our DCOP object and attach to the server, it takes this long:

0.27user 0.03system 0:00.34elapsed 87%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (1107major+65minor)pagefaults 0swaps

I.e. about 1/3 of a second. Basically DCOPClient creation and attaching gets lost in the statistical variation ("noise"). I was getting times between .32 and .48 over several runs for both of the example programs, so obviously system load is more relevant than the extra two calls to DCOPClient::attach and DCOPClient::registerAs, as well as the actual DCOPClient constructor time.

Conclusion

Hopefully this document will get you well on your way into the world of inter-process communication with KDE! Please direct all comments and/or suggestions to Preston Brown <[email protected]> and Matthias Ettrich <[email protected]>.