Projects/MoveToGit/UsingSvn2Git (pt BR)
Projects/MoveToGit/UsingSvn2Git
Languages: عربي | Asturianu | Català | Česky | Kaszëbsczi | Dansk | Deutsch | English | Esperanto | Español | Eesti | فارسی | Suomi | Français | Galego | Italiano | 日本語 | 한국어 | Norwegian | Polski | Português Brasileiro | Română | Русский | Svenska | Slovenčina | Slovenščina | српски | Türkçe | Tiếng Việt | Українська | 简体中文 | 繁體中文
This page documents how to go about getting a KDE module ready for the Great Git Migration of 2010.
Servers to use for all developers
KDE Sysadmin provides 3 servers which are fully setup for writing rules. You can find more information about that on: http://community.kde.org/Sysadmin/DeveloperAccessForRuleWriting.
All registered KDE developers have access to these machines. The rest of this document assumes a setup on your local computer, you are free to set it up on your local computer, but there is no need to. You can use the servers provided by KDE Sysadmin.
Getting the tools
The necessary tools are hosted at http://www.gitorious.org/svn2git. To get started do:
git clone git://gitorious.org/svn2git/svn2git.git
git clone git://git.kde.org/kde-ruleset.git
And then install the libsvn-dev package.
This will get you the source code to build svn2git and the KDE ruleset files as they currently exist. Build the svn2git tool before moving on to the next step.
Building svn2git
Make sure you have Qt4 installed, then simply issue qmake && make to build the executable called "svn-all-fast-export"
How rulesets work
The format for the svn2git rules is pretty simple. First and foremost you have to declare some repositories:
create repository kdelibs end repository
This tells svn2git that it should create a git repository called "kdelibs" that we can later on use to put commits into it.
The rest of the file are rules matching specific paths in Subversion, each rule specifies what to do with the commits that appeared at the given path. The possible actions are ignoring them or adding them to a particular branch in a particular repository. Note: Ignoring is done by simply leaving out the information about the repository and the branch.
As examples are more explanatory, the following rule would put all commits from 123453 to 456789 from the path /trunk/KDE/kdelibs into the master branch of the kdelibs repository:
match /trunk/KDE/kdelibs/ min revision 123453 max revision 456789 repository kdelibs branch master end match
The min and max revision are useful in cases where the same path in SVN contains code for different branches. An example would be KDevelop3, where KDevelop 3.3 was shipped with KDE 3.5 until 3.5.7, 3.5.8 contained KDevelop 3.4 and 3.5.9 contained KDevelop 3.5 and all of those kdevelop versions are now under /branches/KDE/3.5/kdevelop.
The two revision parameters are however not mandatory, if they're left out, then all commits that went to the given matching path in SVN are taken over into the specified branch.
To generate tags with git you use a special format for the branch parameter: refs/tags/<tagname>. So to put all commits from /tags/KDE/4.4.0/kdelibs into the v4.4.0 tag in the kdelibs git repository the rule would be like this:
match /tags/KDE/4.4.0/kdelibs/ repository kdelibs branch refs/tags/v4.4.0 end match
For more examples see the svn2git/samples/ directory and the rules in the kde-ruleset repository.
The recurse action is a hack to tell svn2git to recurse into a directory it
has just copied or that existed because it is of interest. Example: if we are importing kdelibs, it exists in trunk/KDE/kdelibs. At branching, someone did: svn cp $SVNROOT/trunk/KDE $SVNROOT/branches/KDE/4.4
SVN recorded in that commit that branches/KDE/4.4 was the only path changed.
That means the rule
branches/KDE/[^/]+/kdelibs/
will not match.
We need to tell the tool that something interesting happened inside and it should recurse. Then it will apply again all rules to the files that exist at that point, at which point the rules will match.
Important Details
- All matching rules need to end with a '/', else the tool will crash at some point. This is a known bug. The only exception are the rules using the recurse-action.
- Matching rules can use Regular Expressions (according to the QRegExp syntax) in the match line and can use backreferences in the repository and branch parameters using \n (n=1,2,3,...) to reduce the amount of rules.
- The rules form an ordered list that the tool goes through while matching the changed paths for each commit. So if two rules match the same path and neither of the two has more matching criteria, then the rule that is written further up in the file wins. This is useful to exclude certain commits from the extraction process, if you look at the existing kde ruleset you'll notice that at the top some revisions are ignored.
Setting up your system
You will need ~65GB of disk space to get started, as the process requires a copy of the KDE svn database. There is a script that will download this for you (and which can be used to update it periodically using rsync) in kde-ruleset/bin/startSync.
more stuff goes here ...
Step-by-Step on writing rules for a module
Analyzing Subversion history to write rules
First of all you should check whether there are already rules for this module in the kde-ruleset repository. If there are rules already please go down to "Running svn2git"
If there are no rules yet, lets start with the master (aka trunk) branch. The easiest way to find out history with svn is executing:
svn log -v --stop-on-copy file:///path/to/kde_svn/trunk/KDE/module
Please note that '/path/to/kde_svn/' is the path to the 65GB you downloaded, and the 'trunk/KDE/module' is the module you want to write rules for, but those two put together is *not* a path that physically exists on your disk. svn log is smart enough to do what you want.
This will give you a history of the given module in trunk, it'll stop on the first commit that copied the code from somewhere else. The verbose output will allow you to see where this copy came from.
Now we have a starting point to write a rule, we want all commits from this path in our module repository in the master branch:
match /trunk/KDE/module/ repository module branch master end match
If the log stops at a commit that copied the module from somewhere, we need to follow this to also get the history imported from the "old" place the module resided. The same svn command can be used with slightly different path argument:
svn log -v --stop-on-copy file:///path/to/kde_svn/some/other/path@revision
The @revision is important as the original path usually doesn't exist anymore. With this we can write the next rule to the rules file and repeat until we've finally reached the point where the code was initially imported into svn (or probably cvs in the old days)
Now we can take care of the branches, this is a bit more involved as there may be multiple branches scattered over the /branches directory in svn. You can use the same commands as before to find out the history of a branch if you know the path. This time however you can stop following the source of copy-operations once you've found a source that you've already matched in a rule. That way your branch will be connected to the branch it originated from (which is often trunk aka master) in git.
A useful help with finding branches is svn ls in combination with the path@revision syntax, that way you can view the content of a particular svn directory as it was in an older revision. With this you can even find branches that are not visible (have been deleted) in the current revision.
The rule for putting commits into a git branch in the final repository is only slightly different (the example is for a core module):
match /branches/KDE/4.4/module repository module branch 4.4 end match
And last are the tags, this works the same as branches and trunk, except for using branch refs/tags/v<tag-version> for the branch parameter.
Running svn2git
This is the easiest, but most time-consuming part. As example lets say that in our current working directory we have the kde rules repository in kde-ruleset subdir, the svn2git tool in the svn2git subdir and the KDE repository in the kde_svn subdir:
svn2git/svn-all-fast-export --identity-map kde-ruleset/account-map --rules kde-ruleset/module kde_svn
This will take a few hours usually, but it'll spit out the progress. The tool also writes a logfile to module.log, so in case something goes wrong you can find more details in there.
Once its done you should have a new "module" git repository in your current working directory.
Checking for proper history in the new git repository
A very easy way to check whether the history was imported properly is to use the gitk tool from git. It shows you a graphical representation of the history in the git repository which makes it easy to identify where something is wrong.
The tool should be run with the --all switch so it shows all branches.
You can now scroll through the history to check whether things have been imported correctly.
First and foremost there should be the master branch starting at the top with the most recent commit to trunk/ and ending in the oldest commit that imported the code into KDE's svn or cvs repository.
From the master branch there should be several branches going away for each branch you imported. And eventually also branches that start from another non-master branch.
Things that you should look out for are branches that start "nowhere", that is the first commit in the branch has no parent in another branch or master. This means that svn2git didn't see a commit that created this branch from another using a svn cp command. That can mean that you may have forgotton to add a match rule for some path or that the same path was used for different branches in different revisions. The same applies to tags which have a commit without any parent.
This can usually be fixed by using svn log and svn ls to follow the history of the branch. Eventually you might need to apply the min/max revision paramters.
You'll notice that some tags are looking like this:
| * * <v1.2.3> | | * * | / *
Thats normal for our tags even if a bit ugly. The reason is that often compile-fixes are done in trunk/ after the tag has been created and then the commit has been merged over to the tag.
Another thing however are tags that are named vx.y.z_124321. These are tags that have been deleted and re-created later. You can usually see that in the svn log history, these tags can either be manually deleted after the repository creation using git tag or you can add rules that ignore certain revisions of the tag-path before the one putting the commits into the git repository:
match /tags/KDE/3.3.2/kdelibs min revision 424234 max revision 424236 end match match /tags/KDE/3.3.2/kdelibs repository kdelibs branch refs/tags/3.3.2 end match
If you choose to delete them manually please make sure to document this with a textfile or inside the rule file so if someone else does the conversion later again he'll know what manual steps you did.
Before publishing the newly created git repository make sure to repack it. This can greatly reduce it's size (i.e. Phonon's git repository could be shrunken from 18 MB to 5.2 MB)
How to update the account-map file
Currently, account-map file is being generated with 'generateAccountMap'[1] script which parses kde-common/accounts[2] and kde-common/disabled-accounts[3] from SVN.
Once you have your git repository you should check if there are accounts not listed in account-map file (you can use checkMissingAccounts[4]), if that is the case, check if the missing accounts are listed in kde-common/accounts or kde-common/disabled-accounts, if it's not there file a sysadmin bug report[5] to get your missing account included in disabled-accounts. Once you get your missing accounts included in disabled accounts, you could generate the account-map file running 'bin/generateAccountMap', then run svn-all-fast-export again. Do not edit account-map file directly!
Troubleshooting
Recurse action doesn't work with cvs2svn tag commits
You may have to deal with a commit done by cvs2svn to create a tag, for example:
r386536 | (no author) | 2005-02-05 22:16:00 +0100 (Sat, 05 Feb 2005) | 2 lines Changed paths: A /branches/beta_0_7_branch (from /trunk:386535) D /branches/beta_0_7_branch/art-devel D /branches/beta_0_7_branch/arts D /branches/beta_0_7_branch/bugs D /branches/beta_0_7_branch/devel-home D /branches/beta_0_7_branch/developer.kde.org D /branches/beta_0_7_branch/enterprise.kde.org D /branches/beta_0_7_branch/events.kde.org D /branches/beta_0_7_branch/foundation D /branches/beta_0_7_branch/kckde D /branches/beta_0_7_branch/kde-common D /branches/beta_0_7_branch/kde-i18n D /branches/beta_0_7_branch/kde-qt-addon D /branches/beta_0_7_branch/kde-women.kde.org D /branches/beta_0_7_branch/kdeaccessibility D /branches/beta_0_7_branch/kdeaddons D /branches/beta_0_7_branch/kdeadmin D /branches/beta_0_7_branch/kdeartwork D /branches/beta_0_7_branch/kdebase D /branches/beta_0_7_branch/kdebindings D /branches/beta_0_7_branch/kdeedu D /branches/beta_0_7_branch/kdeextragear-1 D /branches/beta_0_7_branch/kdeextragear-2 M /branches/beta_0_7_branch/kdeextragear-3 D /branches/beta_0_7_branch/kdeextragear-3/Makefile.am.in D /branches/beta_0_7_branch/kdeextragear-3/Makefile.cvs D /branches/beta_0_7_branch/kdeextragear-3/README D /branches/beta_0_7_branch/kdeextragear-3/configure.in.bot D /branches/beta_0_7_branch/kdeextragear-3/configure.in.in D /branches/beta_0_7_branch/kdeextragear-3/digikam D /branches/beta_0_7_branch/kdeextragear-3/digikamimageplugins D /branches/beta_0_7_branch/kdeextragear-3/doc D /branches/beta_0_7_branch/kdeextragear-3/filelight D /branches/beta_0_7_branch/kdeextragear-3/kcfgcreator D /branches/beta_0_7_branch/kdeextragear-3/kconfigeditor D /branches/beta_0_7_branch/kdeextragear-3/kdebluetooth D /branches/beta_0_7_branch/kdeextragear-3/kdetv D /branches/beta_0_7_branch/kdeextragear-3/keurocalc D /branches/beta_0_7_branch/kdeextragear-3/kiosktool D /branches/beta_0_7_branch/kdeextragear-3/klicker D /branches/beta_0_7_branch/kdeextragear-3/kplayer D /branches/beta_0_7_branch/kdeextragear-3/pwmanager D /branches/beta_0_7_branch/kdeextragear-libs-1 D /branches/beta_0_7_branch/kdegames D /branches/beta_0_7_branch/kdegraphics D /branches/beta_0_7_branch/kdeinstaller D /branches/beta_0_7_branch/kdejava D /branches/beta_0_7_branch/kdekiosk D /branches/beta_0_7_branch/kdelibs D /branches/beta_0_7_branch/kdemultimedia D /branches/beta_0_7_branch/kdenetwork D /branches/beta_0_7_branch/kdenonbeta D /branches/beta_0_7_branch/kdenox D /branches/beta_0_7_branch/kdepim D /branches/beta_0_7_branch/kdeplayground-artwork D /branches/beta_0_7_branch/kdeplayground-base D /branches/beta_0_7_branch/kdeplayground-edu D /branches/beta_0_7_branch/kdeplayground-games D /branches/beta_0_7_branch/kdeplayground-ioslaves D /branches/beta_0_7_branch/kdeplayground-multimedia D /branches/beta_0_7_branch/kdeplayground-network D /branches/beta_0_7_branch/kdeplayground-pim D /branches/beta_0_7_branch/kdeplayground-utils D /branches/beta_0_7_branch/kdereview D /branches/beta_0_7_branch/kdesdk D /branches/beta_0_7_branch/kdesecurity D /branches/beta_0_7_branch/kdesupport D /branches/beta_0_7_branch/kdetoys D /branches/beta_0_7_branch/kdeutils D /branches/beta_0_7_branch/kdevelop D /branches/beta_0_7_branch/kdewebdev D /branches/beta_0_7_branch/kdoc D /branches/beta_0_7_branch/kfte D /branches/beta_0_7_branch/khtmltests D /branches/beta_0_7_branch/klyx D /branches/beta_0_7_branch/kmusic D /branches/beta_0_7_branch/koffice D /branches/beta_0_7_branch/kofficetests D /branches/beta_0_7_branch/konstruct D /branches/beta_0_7_branch/qt-copy D /branches/beta_0_7_branch/quanta D /branches/beta_0_7_branch/sysconfig D /branches/beta_0_7_branch/valgrind D /branches/beta_0_7_branch/www This commit was manufactured by cvs2svn to create branch 'beta_0_7_branch'.
If you do this
match /branches/beta_0_7_branch/kdeextragear-3/krecipes/ repository krecipes branch 0.7 end match match /branches/beta_0_7_branch/ min revision 386536 max revision 386536 action recurse end match
svn-all-fast-export will fail, you'll get an error sayining that '/foo/bar/path' was not found where '/foo/bar/path' is one of the deleted paths in the cvs2svn commit. This is because some paths were deleted in the same commit where you want to do an 'action recurse'. Therefore, to avoid matching the deleted paths you should do an action recurse on each intermediate directory from '/branches/beta_0_7_branch/' to '/branches/beta_0_7_branch/kdeextragear-3/krecipes/' and you should use a final '$' to make sure that the deleted paths will not be considered, thusly:
match /branches/beta_0_7_branch/kdeextragear-3/krecipes/ repository krecipes branch 0.7 end match match /branches/beta_0_7_branch/kdeextragear-3/$ min revision 386536 max revision 386536 action recurse end match match /branches/beta_0_7_branch/$ min revision 386536 max revision 386536 action recurse end match
Getting Help
If you run into strange things or can't find a rule for something you can reach the KDE Git migration team on IRC: irc.freenode.org, #kde-git or on the kde-scm-interest mailinglist