Getting Started/Build/KDE4
| Tutorial Series | Getting Started |
| Previous | Anonymous SVN Quickstart Guide |
| What's Next | Starting a KDE4 Environment and Applications |
| Further Reading | kdesvn-build: The KDE From Subversion Build Tool Increased Productivity in KDE4 with Scripts Introduction to CMake Instructions for Mac OS X |
Abstract
This tutorial shows one way to get KDE from trunk running on Linux/BSD systems. Throughout the tutorial the bash shell is used. If you are interested in building KDE on other systems such as Solaris, MacOS or Microsoft Windows, please visit the Build page and see the links at the bottom for the respective operating systems.
Required Software
The following must be installed first before you can successfully complete this tutorial:
- gcc and g++ from the gcc project, preferably version 4.1 or higher
- svn, the subversion revision control client
- pkg-config
- development libraries and headers for X11
- development library and headers for libungif
You may also want to have the following installed:
- bash
Create a user account for KDE4 development
Option 1: Command Line
useradd -m kde-devel
or:
useradd kde-devel
mkdir /home/kde-devel
passwd kde-devel
chown kde-devel:kde-devel /home/kde-devel 2>/dev/null || \
chown kde-devel:users /home/kde-devel
Option 2: Using KControl
Instead of using the commands above, you can also use the User module in the KDE Control Center if you already have KDE3 installed.
Setting up the environment
Copy the ~/.bashrc from your normal user account to the new kde-devel account. Next, copy and paste the contents of .bashrc into ~kde-devel/.bashrc.
This will provide access to commands such as cmakekde that are used in this tutorial as well as ensure that the proper paths are in place for Qt, KDE and CMake binaries.
For more information, please read the Getting Started/Increased Productivity in KDE4 with Scripts tutorial.
Switching to the New User
Switch to the user kde-devel: (don't forget the dash)
su - kde-devel
The rest of this tutorial assumes you are running as the kde-devel user.
The development user's shell
On some systems a new user is configured by default to use /bin/sh. If this is not the case on your system, you can skip this section. Using /bin/sh can be very inconvenient to work with and you may want to change it to /bin/bash or another shell.
Option 1: As the kde-devel user
If you don't have root privileges and your system supports the changing of your own shell with the chsh application, then you could try to change your shell to /bin/bash by using chsh -s /bin/bash your-kde-devel-username.
Option 2: As the root user
If your system comes with the usermod application you can run the following command as root: usermod -s /bin/bash. s Another option is to use the vipw application as root to safely edit your /etc/passwd. Locate 'kde-devel' in the the file. Change '/bin/sh' at the end of the line to read '/bin/bash', save your changes and exit.
The new shell will be started automatically when you log in as the kde-devel user again.
Set up D-Bus
QtDBus and KDE are known to work with D-Bus versions 0.62, as well as 0.92 and upwards. Versions 0.60 and 0.61 may work too but are not tested. Versions 0.90 and 0.91 are known not to work. We recommend using post-1.0 release versions (at least 0.94), so consider upgrading if you haven't done so.
Skip this if you have a recent D-Bus version or if you don't want to upgrade.
The Recipe
Before running these steps, make sure your X11 headers and libraries are available before starting these steps. Make sure that the configure script says:
Building X11 code: yes
Steps:
wget http://dbus.freedesktop.org/releases/dbus/dbus-1.0.2.tar.gz
tar -xvzf dbus-1.0.2.tar.gz
cd dbus-1.0.2/
./configure --prefix=$DBUSDIR --localstatedir=/var && make && make install
dbus-uuidgen --ensure
What's Happening
D-Bus source code is downloaded from freedesktop.org (line 1) and unpacked (line 2). After going into the newly created D-Bus directory (line 3), the build is set up using the supplied configure script (lines 4-5). Finally, using dbus-uuidgen, D-Bus will install a machine identification file that allows you to start the bus automatically when the desktop session starts (line 6).
Note that you need write access to /var for that last step.
Set up CMake
Skip this if you have CMake >=2.4.5 installed.
The Recipe
cs
wget http://www.cmake.org/files/v2.4/cmake-2.4.5.tar.gz
tar zxf cmake-2.4.5.tar.gz
mkdir cmake-build
cd cmake-build
../cmake-2.4.5/bootstrap
make
sudo make install
What's Happening
First, we go back to the kde-devel user's home directory (line 1), get the CMake sources (line 2) and unpack them (line 3). We create a directory to build CMake in (line 4) and go into it (line 5). We then run the CMake boostrap script to set up the CMake build (line 6), then make (line 7) and install it (line 8) using the root user.
If your system does not have the sudo command, you can instead do su -c "make install".
Set up Qt
Next we need to get the Qt4 that is in KDE's source repository. KDE is guaranteed to build against any Qt 4.2, so you can use your distribution's packaging if you want to. However, we recommend using the copy in the KDE Subversion servers -- especially the patches.
Note that in the future KDE may require a higher version (Qt betas, for instance), so you may as well get your system building with qt-copy now.
The Recipe
cs
svn checkout svn://anonsvn.kde.org/home/kde/trunk/qt-copy
cd qt-copy
./apply_patches
./configure -qt-gif -no-exceptions -debug -fast \
-prefix $QTDIR -qdbus
make
make install
What's Happening
We switch back to the kde-devel user's home (line 1) and download the source code using subversion (sv) from KDE's repository (line 2). After changing into the resulting ~/qt-copy directory (line 3), we run a script that manages the patches that come with qt-copy (line 4).
Once the patches have been applied, we then set up the build using the configure script (line 5-6). The various command line options used are explained in the ~/qt-copy/README.qt-copy file. Finally, we build (line 7) and install (line 8) Qt. Note that the installation does not require root as it installs it locally into ~/qt-copy.
Set up Strigi
In the next weeks, the code for getting at file metadata will rely on Strigi. It is advisable to install Strigi already to avoid doing it later and to help catch any problems with it. To install Strigi you need the libraries and headers for libz, libbz2 and openssl (libcrypto).
The Recipe
cd
svn checkout svn://anonsvn.kde.org/home/kde/trunk/kdesupport/strigi
cd strigi
cmakekde
What's Happening
We change to the base source directory (line 1). We download the sources for strigi using subversion (line 2), go into the new ~/src/strigi directory (line 3), and commence the build (line 4). This will leave us in the strigi build directory after the build is completed.
Set up kdelibs
With Qt4 built, we can now move on to building KDE's base libraries. If you use the aforementioned .bashrc this is where those new functions come in handy.
The Recipe
cs
mkdir KDE && cd KDE
svn checkout svn://anonsvn.kde.org/home/kde/trunk/KDE/kdelibs
cd kdelibs
cmakekde
What's Happening
We change to the base source directory (line 1) then make and go into the KDE directory (line 2). We download the sources for kdelibs using subversion (line 3), go into the new ~/src/KDE/kdelibs directory (line 4), and commence the build (line 5). This will leave us in the kdelibs build directory after the build is completed.
Additional KDE-specific CMake modules
There are additional CMake modules in kdelibs/cmake/modules/ that are necessary for building KDE4 applications. These will be installed for you when kdelibs itself is installed.
Troubleshooting
If you have problems compiling kdelibs, first make sure the software in the "Required Software" section above is installed and works. Other possible hints include:
- If you received an error stating "Please create a separate build directory and run 'cmake path_to_kdelibs [options]' there." then you need to change to your build directory before running cmakekde. (e.g cs KDE/kdelibs && cb && cmakekde)
- If the problems persist, try the CMake make-option --keep-going.
- Here you need the libungif library, otherwise you will get an error.
Set up kdepimlibs
After kdelibs, but before kdebase, you need to build and install kdepimlibs.
The Recipe
cs KDE
svn checkout svn://anonsvn.kde.org/home/kde/trunk/KDE/kdepimlibs
cs kdepimlibs
cmakekde
What's Happening
We go into the KDE source directory (line 1), download the source code for kdepimlibs using subversion (line 2) and then go into the new ~/KDE/kdepimlibs directory (line 3). We then commence the build (line 4). This will leave us in the kdepimlibs build directory after the build is completed.
Set up kdebase
You may need kdebase for some kioslaves.
cs KDE
svn checkout svn://anonsvn.kde.org/home/kde/trunk/KDE/kdebase
cs kdebase
cmakekde
Troubleshooting
If you have troubles compiling kdebase:
- Make sure you have the libxss headers installed. (Usually you got undefined references on xscreensaver objects if you haven't those headers)
- which meinproc has to deliver /home/kde-devel/kde/bin/meinproc
- if cmakekde cannot find the path of kdepimlibs, edit the file /home/kde-devel/kdebase-build/CMakeCache.txt and manually set KDEPIMLIBS_INCLUDE_DIR:PATH=/home/kde-devel/kdepimlibs-build
- if you get an error saying "Please set the following variables: X11_XTest_LIB (ADVANCED)", install the devel package of Xtst. On some systems, this is packaged separately from xext and called x11proto-xext-dev or libxtst-dev. You may also need to remove the CMakeCache.txt file in the build dir after installing the package.
- the same for "X11_Xinerama_LIB (ADVANCED)" where you will need the devel package for xinerama.
Generating local API documentation
Although the API documentation for KDE is available online at api.kde.org, it is sometimes useful to have it on your own disk, for example when you want to use KDevelop for browsing the documentation or when you are not able to be online all the time.
Be aware that generating the API documentation can take several hours and takes almost half a gigabyte of diskspace. The generation is handled by a script in kdelibs/doc/api, you need doxygen to be able to run it.
To build the API documentation for kdelibs, type the following:
cs
mkdir apidox
cs apidox
../kdelibs/doc/api/doxygen.sh ../kdelibs/
Success!
You are now ready to start building other svn modules in the same fashion as you built kdebase, running and testing KDE4 or writing your own patches and applications.
See the Starting a KDE4 Environment and Applications tutorial for how to start working on your new KDE4 installation.