Development/Tutorials/Unittests (pt BR)

Development/Tutorials/Unittests

Languages: عربي | Asturianu | Català | Česky | Kaszëbsczi | Dansk | Deutsch | English | Esperanto | Español | Eesti | فارسی | Suomi | Français | Galego | Italiano | 日本語 | 한국어 | Norwegian | Polski | Português Brasileiro | Română | Русский | Svenska | Slovenčina | Slovenščina | српски | Türkçe | Tiếng Việt | Українська | 简体中文 | 繁體中文

Author: Brad Hards, Sigma Bravo Pty Limited

Abstract

Esse artigo é um guia para escrever testes unitários para Qt4 e KDE4, baseado no framework QtTestLib lançado no Qt 4.1. Esse provê uma introdução para as idéias por trás de testes unitários, tutorial sobre framework QtTestLib e sugestões para obter um resultado melhor nos testes. Esse documento está de acordo com o Qt4.1 e KDE4.

Sobre Testes Unitários

Testes unitários verificam a funcionalidade, comportamento e conformidade de um componente do software. No Qt4 (incluindo KDE4) testes unitários são quase sempre usados para testar uma única classe C++ (embora testar uma macro ou função C é possível também).

Testes unitários são a parte principal do TDD (Desenvolvimento Orientado/Dirigido a Testes), de qualquer forma eles são úteis para todos os processos de desenvolvimento de software. Não é necessário que todo o código tenha cobertura de testes unitários (embora isso seja desejável!). Mesmo um único teste é passo útil para aumentar a qualidade do código.

Note que testes unitários são testes dinâmicos (eles rodam usando o código compilado) melhor que testes de análise estática (que age no código fonte ou em uma representação intermediária disso).

Mesmo se não são chamados "testes unitários", a maioria dos programadores tem escrito algum código "descartável" que eles usam para verificar uma implementação. Se esse código foi um pouco limpo, e desenvolvido em um sistema de desenvolvimento, então poderia ser usado várias vezes para verificar se a implementação ainda está funcionando. Para fazer isso um pouco mais fácil, nós podemos usar frameworks de teste.

Note que algumas vezes isso é uma tentação para tratar o teste unitário puramente como uma ferramenta de verificação. Enquanto é verdade que testes unitários ajudam e muito a garantir correta funcionalidade e comportamento, eles também contribuem com outros aspectos da qualidade do código, e pensando sobre que inputs precisam ser testados podem ajudar a identificar problemas de lógica no código (mesmo antes de rodar os testes). Em adição, o necessário para fazer o código estável é guia muito útil para garantir que classes não sofram de close coupling.

Depois de muitos conceitos - vamos falar sobre uma ferramenta específica que ode reduzir algum esforços e deixar nós chegarmos no trabalho propriamente dito.

Sobre QtTestLib

QtTestLib é uma biblioteca de testes leve desenvolvida pela TrollTech e lançada sobre a lincença GPL (uma versão comercial está disponível também, mas é necessário uma licença diferente). É escrito em C++ e é multiplataforma. Faz parte do Qt 4.1 e antes disso, foram lançadas versão separadamente. Versões antigas tem uma API diferente e os exemplos não vão funcionar com versões antigas.

Em adição a capacidade dos testes unitários, QtTestLib também oferece testes básicos de interface, baseados em QEvents. Isso te permite testar GUI widgets, mas não é geralmente indicado para testar uma aplicação inteira.

Cada testcase é um aplicção de teste independente. Diferente de CppUnit ou JUnit, não há uma classe tipo Runner. Ao invés, cada testcase é um executável que é só rodar.

Tutorial 1: Um simples teste de uma classe Data

Neste tutorial, nós vamos construir um teste simples para uma classe que representa uma data, usando QtTestLib como framework de teste. Para evitar muitos detalhes de como a classe data funciona, nós vamos usar apenas QDate. Classe que vem com o Qt. Em um teste unitário normal, você provavelmente testaria código escrito por você mesmo.

O código abaixo é um testecase completo.

Example 1. QDate test code <syntaxhighlight lang="cpp-qt" line>

1. include <QtTest>
2. include <QtCore>

class testDate: public QObject {

   Q_OBJECT

private slots:

   void testValidity();
   void testMonth();

};

void testDate::testValidity() {

   // 11 March 1967
   QDate date( 1967, 3, 11 );
   QVERIFY( date.isValid() );

}

void testDate::testMonth() {

   // 11 March 1967
   QDate date;
   date.setYMD( 1967, 3, 11 );
   QCOMPARE( date.month(), 3 );
   QCOMPARE( QDate::longMonthName(date.month()),
             QString("March") );

}

QTEST_MAIN(testDate)

1. include "tutorial1.moc"

Save as tutorial1.cpp

Stepping through the code, the first line imports the header files for the QtTest namespace. The second line imports the headers for the QtCore namespace (not strictly necessary, since QtTest also imports it, but it is robust and safe). Lines 4 to 10 give us the test class, testData. Note that testDate inherits from QObject and has the Q_OBJECT macro - QtTestLib requires specific Qt functionality that is present in QObject.

Lines 12 to 17 provide our first test, which checks that a date is valid. Note the use of the QVERIFY macro, which checks that the condition is true. So if date.isValid() returns true, then the test will pass, otherwise the test will fail. QVERIFY is similar to ASSERT in other test suites.

Similarly, lines 19 to 27 provide another test, which checks a setter, and a couple of accessor routines. In this case, we are using QCOMPARE, which checks that the conditions are equal. So if date.month() returns 3, then that part of that test will pass, otherwise the test will fail.

Warning

As soon as a QVERIFY evaluates to false or a QCOMPARE does not have two equal values, the whole test is marked as failed and the next test will be started. So in the example above, if the check at line 24 fails, then the check at lines 25 and 26 will not be run.

In a later tutorial we will see how to work around problems that this behaviour can cause.

Line 30 uses the QTEST_MAIN which creates an entry point routine for us, with appropriate calls to invoke the testDate unit test class.

Line 31 includes the Meta-Object compiler output, so we can make use of our QObject functionality.

The qmake project file that corresponds to that code is shown below. You would then use qmake to turn this into a Makefile and then compile it with make.

Example 2. QDate unit test project CONFIG += qtestlib TEMPLATE = app TARGET += DEPENDPATH += . INCLUDEPATH += .

1. Input

SOURCES += tutorial1.cpp Save as tutorial1.pro

This is a fairly normal project file, except for the addition of the CONFIG += qtestlib. This adds the right header and library setup to the Makefile.

Create an empty file called tutorial1.h and compile with qmake; make The output looks like the following:

Example 3. QDate unit test output $ ./tutorial1

• • • • • • • • • Start testing of testDate *********

Config: Using QTest library 4.1.0, Qt 4.1.0-snapshot-20051003 PASS  : testDate::initTestCase() PASS  : testDate::testValidity() PASS  : testDate::testMonth() PASS  : testDate::cleanupTestCase() Totals: 4 passed, 0 failed, 0 skipped

• • • • • • • • • Finished testing of testDate *********

Looking at the output above, you can see that the output includes the version of the test library and Qt itself, and then the status of each test that is run. In addition to the testValidity and testMonth tests that we defined, there is also a setup routine (initTestCase) and a teardown routine (cleanupTestCase) that can be used to do additional configuration if required.

Failing tests

If we had made an error in either the production code or the unit test code, then the results would show an error. An example is shown below:

Example 4. QDate unit test output showing failure $ ./tutorial1

• • • • • • • • • Start testing of testDate *********

Config: Using QTest library 4.1.0, Qt 4.1.0-snapshot-20051003 PASS  : testDate::initTestCase() PASS  : testDate::testValidity() FAIL!  : testDate::testMonth() Compared values are not the same

  Actual (date.month()): 4
  Expected (3): 3
   Loc: [tutorial1.cpp(25)]

PASS  : testDate::cleanupTestCase() Totals: 3 passed, 1 failed, 0 skipped

• • • • • • • • • Finished testing of testDate *********

Running selected tests

When the number of test functions increases, and some of the functions take a long time to run, it can be useful to only run a selected function. For example, if you only want to run the testMonth function, then you just specify that on the command line, as shown below:

Example 5. QDate unit test output - selected function

$ ./tutorial1 testValidity

• • • • • • • • • Start testing of testDate *********

Config: Using QTest library 4.1.0, Qt 4.1.0-snapshot-20051003 PASS  : testDate::initTestCase() PASS  : testDate::testValidity() PASS  : testDate::cleanupTestCase() Totals: 3 passed, 0 failed, 0 skipped

• • • • • • • • • Finished testing of testDate *********

Note that the initTestCase and cleanupTestCase routines are always run, so that any necessary setup and cleanup will still be done.

You can get a list of the available functions by passing the -functions option, as shown below:

Example 6. QDate unit test output - listing functions $ ./tutorial1 -functions testValidity() testMonth()

Verbose output options

You can get more verbose output by using the -v1, -v2 and -vs options. -v1 produces a message on entering each test function. I found this is useful when it looks like a test is hanging. This is shown below:

Example 7. QDate unit test output - verbose output

$ ./tutorial1 -v1

• • • • • • • • • Start testing of testDate *********

Config: Using QTest library 4.1.0, Qt 4.1.0-snapshot-20051003 INFO  : testDate::initTestCase() entering PASS  : testDate::initTestCase() INFO  : testDate::testValidity() entering PASS  : testDate::testValidity() INFO  : testDate::testMonth() entering PASS  : testDate::testMonth() INFO  : testDate::cleanupTestCase() entering PASS  : testDate::cleanupTestCase() Totals: 4 passed, 0 failed, 0 skipped

• • • • • • • • • Finished testing of testDate *********

The -v2 option shows each QVERIFY, QCOMPARE and QTEST, as well as the message on entering each test function. I found this useful for verifying that a particular step is being run. This is shown below:

'Example 8. QDate unit test output - more verbose output

$ ./tutorial1 -v2

• • • • • • • • • Start testing of testDate *********

Config: Using QTest library 4.1.0, Qt 4.1.0-snapshot-20051003 INFO  : testDate::initTestCase() entering PASS  : testDate::initTestCase() INFO  : testDate::testValidity() entering INFO  : testDate::testValidity() QVERIFY(date.isValid())

   Loc: [tutorial1.cpp(17)]

PASS  : testDate::testValidity() INFO  : testDate::testMonth() entering INFO  : testDate::testMonth() COMPARE()

   Loc: [tutorial1.cpp(25)]

INFO  : testDate::testMonth() COMPARE()

   Loc: [tutorial1.cpp(27)]

PASS  : testDate::testMonth() INFO  : testDate::cleanupTestCase() entering PASS  : testDate::cleanupTestCase() Totals: 4 passed, 0 failed, 0 skipped

• • • • • • • • • Finished testing of testDate *********

The -vs option shows each signal that is emitted. In our example, there are no signals, so -vs has no effect. Getting a list of signals is useful for debugging failing tests, especially GUI tests which we will see in the third tutorial.

Output to a file

If you want to output the results of your testing to a file, you can use the -o filename, where you replace filename with the name of the file you want to save output to.

Tutorial 2: Data driven testing of a date class

In the previous example, we looked at how we can test a date class. If we decided that we really needed to test a lot more dates, then we'd be cutting and pasting a lot of code. If we subsequently changed the name of a function, then it has to be changed in a lot of places. As an alternative to introducing these types of maintenance problems into our tests, QtTestLib offers support for data driven testing.

The easiest way to understand data driven testing is by an example, as shown below:

Example 9. QDate test code, data driven version <syntaxhighlight lang="cpp-qt" line>

1. include <QtTest>
2. include <QtCore>

class testDate: public QObject {

   Q_OBJECT

private slots:

   void testValidity();
   void testMonth_data();
   void testMonth();

};

void testDate::testValidity() {

   // 12 March 1967
   QDate date( 1967, 3, 12 );
   QVERIFY( date.isValid() );

}

void testDate::testMonth_data() {

   QTest::addColumn<int>("year");  // the year we are testing
   QTest::addColumn<int>("month"); // the month we are testing
   QTest::addColumn<int>("day");   // the day we are testing
   QTest::addColumn<QString>("monthName");   // the name of the month

   QTest::newRow("1967/3/11") << 1967 << 3 << 11 << QString("March");
   QTest::newRow("1966/1/10") << 1966 << 1 << 10 << QString("January");
   QTest::newRow("1999/9/19") << 1999 << 9 << 19 << QString("September");
   // more rows of dates can go in here...

}

void testDate::testMonth() {

   QFETCH(int, year);
   QFETCH(int, month);
   QFETCH(int, day);
   QFETCH(QString, monthName);

   QDate date;
   date.setYMD( year, month, day);
   QCOMPARE( date.month(), month );
   QCOMPARE( QDate::longMonthName(date.month()), monthName );

}

QTEST_MAIN(testDate)

1. include "tutorial2.moc"

As you can see, we've introduced a new method - testMonth_data, and moved the specific test date out of testMonth. We've had to add some more code (which will be explained soon), but the result is a separation of the data we are testing, and the code we are using to test it. The names of the functions are important - you must use the _data suffix for the data setup routine, and the first part of the data setup routine must match the name of the driver routine.

It is useful to visualise the data as being a table, where the columns are the various data values required for a single run through the driver, and the rows are different runs. In our example, there are four columns (three integers, one for each part of the date; and one QString ), added in lines 19 through 22. The addColumn template obviously requires the type of variable to be added, and also requires a variable name argument. We then add as many rows as required using the newRow function, as shown in lines 23 through 26. The string argument to newRow is a label, which is handy for determining what is going on with failing tests, but doesn't have any effect on the test itself.

To use the data, we simply use QFETCH to obtain the appropriate data from each row. The arguments to QFETCH are the type of the variable to fetch, and the name of the column (which is also the local name of the variable it gets fetched into). You can then use this data in a QCOMPARE or QVERIFY check. The code is run for each row, which you can see below:

Example 10. Results of data driven testing, showing QFETCH

$ ./tutorial2 -v2

• • • • • • • • • Start testing of testDate *********

Config: Using QTest library 4.1.0, Qt 4.1.0-snapshot-20051020 INFO  : testDate::initTestCase() entering PASS  : testDate::initTestCase() INFO  : testDate::testValidity() entering INFO  : testDate::testValidity() QVERIFY(date.isValid())

  Loc: [tutorial2.cpp(19)]

PASS  : testDate::testValidity() INFO  : testDate::testMonth() entering INFO  : testDate::testMonth(1967/3/11) COMPARE()

  Loc: [tutorial2.cpp(44)]

INFO  : testDate::testMonth(1967/3/11) COMPARE()

  Loc: [tutorial2.cpp(45)]

INFO  : testDate::testMonth(1966/1/10) COMPARE()

  Loc: [tutorial2.cpp(44)]

INFO  : testDate::testMonth(1966/1/10) COMPARE()

  Loc: [tutorial2.cpp(45)]

INFO  : testDate::testMonth(1999/9/19) COMPARE()

  Loc: [tutorial2.cpp(44)]

INFO  : testDate::testMonth(1999/9/19) COMPARE()

  Loc: [tutorial2.cpp(45)]

PASS  : testDate::testMonth() INFO  : testDate::cleanupTestCase() entering PASS  : testDate::cleanupTestCase() Totals: 4 passed, 0 failed, 0 skipped

• • • • • • • • • Finished testing of testDate *********

The QTEST macro

As an alternative to using QFETCH and QCOMPARE, you may be able to use the QTEST macro instead. QTEST takes two arguments, and if one is a string, it looks up that string as an argument in the current row. You can see how this can be used below, which is equivalent to the testMonth() code in the previous example.

Example 11. QDate test code, data driven version using QTEST

<syntaxhighlight lang="cpp-qt" line> void testDate::testMonth() {

   QFETCH(int, year);
   QFETCH(int, month);
   QFETCH(int, day);

   QDate date;
   date.setYMD( year, month, day);
   QCOMPARE( date.month(), month );
   QTEST( QDate::longMonthName(date.month()), "monthName" );

}

In the example above, note that monthName is enclosed in quotes, and we no longer have a QFETCH call for monthName.

The other QCOMPARE could also have been converted to use QTEST, however this would be less efficient, because we already needed to use QFETCH to get month for the setYMD in the line above.

Running selected tests with selected data

In the previous tutorial, we saw how to run a specific test by specifying the name of the test as a command line argument. In data driven testing, you can select which data you want the test run with, by adding a colon and the label for the data row. For example, if we just want to run the testMonth test for the first row, we would use

./tutorial2 -v2 testMonth:1967/3/11

. The result of this is shown below.

Example 12. QDate unit test output - selected function and data $ ./tutorial2 -v2 testMonth:1967/3/11

• • • • • • • • • Start testing of testDate *********

Config: Using QTest library 4.1.0, Qt 4.1.0-snapshot-20051020 INFO  : testDate::initTestCase() entering PASS  : testDate::initTestCase() INFO  : testDate::testMonth() entering INFO  : testDate::testMonth(1967/3/11) COMPARE()

  Loc: [tutorial2.cpp(44)]

INFO  : testDate::testMonth(1967/3/11) COMPARE()

  Loc: [tutorial2.cpp(45)]

PASS  : testDate::testMonth() INFO  : testDate::cleanupTestCase() entering PASS  : testDate::cleanupTestCase() Totals: 3 passed, 0 failed, 0 skipped

• • • • • • • • • Finished testing of testDate *********

Tutorial 3: Testing Graphical User Interfaces

In the previous two tutorials, we've tested a date management class. This is an pretty typical use of unit testing. However Qt and KDE applications will make use graphical classes that take user input (typically from a keyboard and mouse). QtTestLib offers support for testing these classes, which we'll see in this tutorial.

Again, we'll use an existing class as our test environment, and again it will be date related - the standard Qt QDateEdit class. For those not familiar with this class, it is a simple date entry widget (although with some powerful back end capabilities). A picture of the widget is shown below.

Figure 1. QDateEdit widget screenshot

The way QtTestLib provides GUI testing is by injecting QInputEvent events. To the application, these input events appear the same as normal key press/release and mouse clicks/drags. However the mouse and keyboard are unaffected, so that you can continue to use the machine normally while tests are being run.

An example of how you can use the GUI functionality of QtTestLib is shown below.

Example 13. QDateEdit test code

<syntaxhighlight lang="cpp-qt" line>

1. include <QtTest>
2. include <QtCore>
3. include <QtGui>

Q_DECLARE_METATYPE(QDate)

class testDateEdit: public QObject {

   Q_OBJECT

private slots:

   void testChanges();
   void testValidator_data();
   void testValidator();

};

void testDateEdit::testChanges() {

   // 11 March 1967
   QDate date( 1967, 3, 11 );
   QDateEdit dateEdit( date );

   // up-arrow should increase day by one
   QTest::keyClick( &dateEdit, Qt::Key_Up );
   QCOMPARE( dateEdit.date(), date.addDays(1) );

   // we click twice on the "reduce" arrow at the bottom RH corner
   // first we need the widget size to know where to click
   QSize editWidgetSize = dateEdit.size();
   QPoint clickPoint(editWidgetSize.rwidth()-2, editWidgetSize.rheight()-2);
   // issue two clicks
   QTest::mouseClick( &dateEdit, Qt::LeftButton, 0, clickPoint);
   QTest::mouseClick( &dateEdit, Qt::LeftButton, 0, clickPoint);
   // and we should have decreased day by two (one less than original)
   QCOMPARE( dateEdit.date(), date.addDays(-1) );

   QTest::keyClicks( &dateEdit, "25122005" );
   QCOMPARE( dateEdit.date(), QDate( 2005, 12, 25 ) );

   QTest::keyClick( &dateEdit, Qt::Key_Tab, Qt::ShiftModifier );
   QTest::keyClicks( &dateEdit, "08" );
   QCOMPARE( dateEdit.date(), QDate( 2005, 8, 25 ) );

}

void testDateEdit::testValidator_data() {

   qRegisterMetaType<QDate>("QDate");

   QTest::addColumn<QDate>( "initialDate" );
   QTest::addColumn<QString>( "keyclicks" );
   QTest::addColumn<QDate>( "finalDate" );

   QTest::newRow( "1968/4/12" ) << QDate( 1967, 3, 11 )
                                << QString( "12041968" )
                                << QDate( 1968, 4, 12 );

   QTest::newRow( "1967/3/14" ) << QDate( 1967, 3, 11 )
                                << QString( "140abcdef[" )
                                << QDate( 1967, 3, 14 );
   // more rows can go in here

}

void testDateEdit::testValidator() {

   QFETCH( QDate, initialDate );
   QFETCH( QString, keyclicks );
   QFETCH( QDate, finalDate );

   QDateEdit dateEdit( initialDate );
   // this next line is just to start editing
   QTest::keyClick( &dateEdit, Qt::Key_Enter );
   QTest::keyClicks( &dateEdit, keyclicks );
   QCOMPARE( dateEdit.date(), finalDate );

}

QTEST_MAIN(testDateEdit)

1. include "tutorial3.moc"

Much of this code is common with previous examples, so I'll focus on the new elements and the more important changes as we work through the code line-by-line.

Lines 1 to 3 import the various Qt declarations, as before.

Line 4 is a macro that is required for the data-driven part of this test, which I'll come to soon.

Lines 5 to 12 declare the test class - while the names have changed, it is pretty similar to the previous example. Note the testValidator and testValidator_data functions - we will be using data driven testing again in this example.

Our first real test starts in line 13. Line 16 creates a QDate, and line 17 uses that date as the initial value for a QDateEdit widget.

Lines 19 and 20 show how we can test what happens when we press the up-arrow key. The QTest::keyClick function takes a pointer to a widget, and a symbolic key name (a char or a Qt::Key). At line 20, we check that the effect of that event was to increment the date by a day. The QTest:keyClick function also takes an optional keyboard modifier (such as Qt::ShiftModifier for the shift key) and an optional delay value (in milliseconds). As an alternative to using QTest::keyClick, you can use QTest::keyPress and QTest::keyRelease to construct more complex keyboard sequences.

Lines 23 to 29 show a similar test to the previous one, but in this case we are simulating a mouse click. We need to click in the lower right hand part of the widget (to hit the decrement arrow - see Figure 1), and that requires knowing how large the widget is. So lines 23 and 24 calculate the correct point based off the size of the widget. Line 26 (and the identical line 27) simulates clicking with the left-hand mouse button at the calculated point. The arguments to Qt::mouseClick are:

• a pointer to the widget that the click event should be sent to.
• the mouse button that is being clicked.
• an optional keyboard modifier (such a Qt::ShiftModifier), or 0 for no modifiers.
• an optional click point - this defaults to the middle of the widget if not specified.
• an optional mouse delay.

In addition to QTest::mouseClick, there is also QTest::mousePress, QTest::mouseRelease, QTest::mouseDClick (providing double-click) and QTest::mouseMove. The first three are used in the same way as QTest::mouseClick. The last takes a point to move the mouse to. You can use these functions in combination to simulate dragging with the mouse.

Lines 30 and 31 show another approach to keyboard entry, using the QTest::keyClicks. Where QTest::keyClick sends a single key press, QTest::keyClicks takes a QString (or something equivalent, in line 30 a character array) that represents a sequence of key clicks to send. The other arguments are the same.

Lines 32 to 34 show how you may need to use a combination of functions. After we've entered a new date in line 30, the cursor is at the end of the widget. At line 32, we use a Shift-Tab combination to move the cursor back to the month value. Then at line 33 we enter a new month value. Of course we could have used individual calls to QTest::keyClick, however that wouldn't have been as clear, and would also have required more code.

Data-driven GUI testing

Lines 50 to 60 show a data-driven test - in this case we are checking that the validator on QDateEdit is performing as expected. This is a case where data-driven testing can really help to ensure that things are working the way they should.

At lines 52 to 54, we fetch in an initial value, a series of key-clicks, and an expected result. These are the columns that are set up in lines 39 to 41. However note that we are now pulling in a QDate, where in previous examples we used three integers and then build the QDate from those. However QDate isn't a registered type for QMetaType, and so we need to register it before we can use it in our data-driven testing. This is done using the Q_DECLARE_METATYPE macro in line 4 and the qRegisterMetaType function in line 38.

Lines 42 to 47 add in a couple of sample rows. Lines 42 to 44 represent a case where the input is valid, and lines 45 to 47 are a case where the input is only partly valid (the day part). A real test will obviously contain far more combinations than this.

Those test rows are actually tested in lines 55 to 59. We construct the QDateEdit widget in line 55, using the initial value. We then send an Enter key click in line 57, which is required to get the widget into edit mode. At line 58 we simulate the data entry, and at line 59 we check whether the results are what was expected.

Lines 61 and 62 are the same as we've seen in previous examples.

Re-using test elements

If you are re-using a set of events a number of times, then it may be an advantage to build a list of events, and then just replay them. This can improve maintainability and clarity of a set of tests, especially for mouse movements.

The key class for building a list of test events is imaginatively known as QTestEventList. It is a QList of QTestEvents. The normal approach is to create the list, and then use various member functions to add key and mouse events. The normal functions that you'll need are addKeyClick and addMouseClick, which are very similar to the QTest::keyClick and QTest::mouseClick functions we used earlier in this tutorial. For finer grained operations, you can also use addKeyPress, addKeyRelease, addKeyEvent, addMousePress, addMouseRelease, addMouseDClick and addMouseMove to build up more complex event lists. You can also use addDelay to add a specified delay between events. When the list has been built up, you just call simulate on each widget.

You can see how this works in the example below, which is the QDateEdit example (from above) converted to use QTestEventList.

Example 14. QDateEdit test code, using QTestEventList <syntaxhighlight lang="cpp-qt" line>

1. include <QtTest>
2. include <QtCore>
3. include <QtGui>

Q_DECLARE_METATYPE(QDate)

class testDateEdit: public QObject {

   Q_OBJECT

private slots:

   void testChanges();
   void testValidator_data();
   void testValidator();

};

void testDateEdit::testChanges() {

   // 11 March 1967
   QDate date( 1967, 3, 11 );
   QDateEdit dateEdit( date );

   // up-arrow should increase day by one
   QTest::keyClick( &dateEdit, Qt::Key_Up );
   QCOMPARE( dateEdit.date(), date.addDays(1) );

   // we click twice on the "reduce" arrow at the bottom RH corner
   // first we need the widget size to know where to click
   QSize editWidgetSize = dateEdit.size();
   QPoint clickPoint(editWidgetSize.rwidth()-2, editWidgetSize.rheight()-2);
   // build a list that contains two clicks
   QTestEventList list1;
   list1.addMouseClick( Qt::LeftButton, 0, clickPoint);
   list1.addMouseClick( Qt::LeftButton, 0, clickPoint);
   // call that list on the widget
   list1.simulate( &dateEdit );
   // and we should have decreased day by two (one less than original)
   QCOMPARE( dateEdit.date(), date.addDays(-1) );

   QTest::keyClicks( &dateEdit, "25122005" );
   QCOMPARE( dateEdit.date(), QDate( 2005, 12, 25 ) );

   QTestEventList list2;
   list2.addKeyClick( Qt::Key_Tab, Qt::ShiftModifier );
   list2.addKeyClicks( "08" );
   list2.simulate( &dateEdit );
   QCOMPARE( dateEdit.date(), QDate( 2005, 8, 25 ) );

}

void testDateEdit::testValidator_data() {

   qRegisterMetaType<QDate>("QDate");

   QTest::addColumn<QDate>( "initialDate" );
   QTest::addColumn<QTestEventList>( "events" );
   QTest::addColumn<QDate>( "finalDate" );

   QTestEventList eventsList1;
   // this next line is just to start editing
   eventsList1.addKeyClick( Qt::Key_Enter );
   eventsList1.addKeyClicks( "12041968" );

   QTest::newRow( "1968/4/12" ) << QDate( 1967, 3, 11 )
                                << eventsList1
                                << QDate( 1968, 4, 12 );

   QTestEventList eventsList2;
   eventsList2.addKeyClick( Qt::Key_Enter );
   eventsList2.addKeyClicks( "140abcdef[" );

   QTest::newRow( "1967/3/14" ) << QDate( 1967, 3, 11 )
                                << eventsList2
                                << QDate( 1967, 3, 14 );
   // more rows can go in here

}

void testDateEdit::testValidator() {

   QFETCH( QDate, initialDate );
   QFETCH( QTestEventList, events );
   QFETCH( QDate, finalDate );

   QDateEdit dateEdit( initialDate );

   events.simulate( &dateEdit);

   QCOMPARE( dateEdit.date(), finalDate );

}

QTEST_MAIN(testDateEdit)

1. include "tutorial3a.moc"

This example is pretty much the same as the previous version, up to line 25. In line 26, we create a QTestEventList. We add events to the list in lines 27 and 28 - note that we don't specify the widget we are calling them on at this stage. In line 30, we simulate each event on the widget. If we had multiple widgets, we could call simulate using the same set of events.

Lines 31 to 34 are as per the previous example.

We create another list in lines 35 to 37, although this time we are using addKeyClick and addKeyClicks instead of adding mouse events. Note that an event list can contain combinations of mouse and keyboard events - it just didn't make sense in this test to have such a combination. We use the second list at line 38, and check the results in line 39.

You can also build lists of events in data driven testing as well, as shown in lines 41 to 70. The key difference is that instead of fetching a QString in each row, we are fetching a QTestEventList. This requires that we add a column of QTestEventList, rather than QString (see line 45). At lines 47 to 50, we create a list of events. At line 52 we add those events to the applicable row. We create a second list at lines 54 to 56, and add that second list to the applicable row in line 58.

We fetch the events in line 65, and use them in line 68. If we had multiple widgets, then we could use the same event list several times.

Tutorial 4 - Testing for failure and avoiding tests

Under some conditions, it is impossible to avoid tests failing. In this section, we'll see how to deal with these cases.

Skipping tests

Where a test doesn't make sense to run (for example, if the required test files aren't available, or the feature is architecture or operating system dependent), the cleanest solution is to skip the test.

Tests are skipped using the QSKIP macro. QSKIP takes two arguments - a label string that should be used to describe why the test is being skipped, and a enumerated constant that controls how much of the test is skipped. If you pass SkipSingle, and the test is data driven, then only the current row is skipped. If you pass SkipAll and the test is data driven, then all following rows are skipped. If the test is not data driven, then it doesn't matter which one is used.

You can see how QSKIP works in the example below:

Example 15. Unit test showing skipped tests void testDate::testSkip_data() {

   QTest::addColumn<int>("val1");
   QTest::addColumn<int>("val2");

   QTest::newRow("1") << 1 << 1;
   QTest::newRow("2") << 1 << 2;
   QTest::newRow("3") << 3 << 3;
   QTest::newRow("5") << 5 << 5;
   QTest::newRow("4") << 4 << 5;

}

void testDate::testSkip() {

   QFETCH(int, val1);
   QFETCH(int, val2);

   if ( val2 == 2 ) 
       QSKIP("Two isn't good, not doing it", SkipSingle);
   if ( val1 == 5 )
       QSKIP("Five! I've had enough, bailing here", SkipAll);
   QCOMPARE( val1, val2 );

}

Example 16. Output of unit test showing skipped tests $ ./tutorial4 testSkip -v2

• • • • • • • • • Start testing of testDate *********

Config: Using QTest library 4.1.0, Qt 4.1.0-snapshot-20051107 INFO  : testDate::initTestCase() entering PASS  : testDate::initTestCase() INFO  : testDate::testSkip() entering INFO  : testDate::testSkip(1) COMPARE()

  Loc: [tutorial4.cpp(82)]

SKIP  : testDate::testSkip(2) Two isn't good, not doing it

  Loc: [tutorial4.cpp(79)]

INFO  : testDate::testSkip(3) COMPARE()

  Loc: [tutorial4.cpp(82)]

SKIP  : testDate::testSkip(5) Five! I've had enough, bailing here

  Loc: [tutorial4.cpp(81)]

PASS  : testDate::testSkip() INFO  : testDate::cleanupTestCase() entering PASS  : testDate::cleanupTestCase() Totals: 3 passed, 0 failed, 2 skipped

• • • • • • • • • Finished testing of testDate *********

from the verbose output, you can see that the test was run on the first and third rows. The second row wasn't run because of the QSKIP call with a SkipSingle argument. Similarly, the fourth and fifth rows weren't run because the fourth row triggered a QSKIP call with a SkipAll argument.

Also note that the test didn't fail, even though there were two calls to QSKIP. Conceptually, a skipped test is a test that didn't make sense to run for test validity reasons, rather than a test that is valid but will fail because of bugs or lack of features in the code being tested.

Handling expected failures

If you have valid tests, but the code that you are testing doesn't pass them, then ideally you fix the code you are testing. However sometimes that isn't possible in the time that you have available, or because of a need to avoid binary incompatible changes. In this case, it is undesirable to delete or modify the unit tests - it is better to flag the test as "expected to fail", using the QEXPECT_FAIL macro. An example of this is shown below:

Example 17. Unit test showing expected failures

<syntaxhighlight lang="cpp-qt" line> void testDate::testExpectedFail() {

   QEXPECT_FAIL("", "1 is not 2, even for very large 1", Continue);
   QCOMPARE( 1, 2 );
   QCOMPARE( 2, 2 );

   QEXPECT_FAIL("", "1 is not 2, even for very small 2", Abort);
   QCOMPARE( 1, 2 );
   // The next line will not be run, because we Abort on previous failure
   QCOMPARE( 3, 3 );

}

Example 18. Output of unit test showing expected failures

$ ./tutorial4/tutorial4 testExpectedFail -v2

• • • • • • • • • Start testing of testDate *********

Config: Using QTest library 4.1.0, Qt 4.1.0-snapshot-20051107 INFO  : testDate::initTestCase() entering PASS  : testDate::initTestCase() INFO  : testDate::testExpectedFail() entering INFO  : testDate::testExpectedFail() Compared values are not the same

  Actual (1): 1
  Expected (2): 2
  Loc: [tutorial4.cpp(41)]

XFAIL  : testDate::testExpectedFail() 1 is not 2, even for very large 1

  Loc: [tutorial4.cpp(41)]

INFO  : testDate::testExpectedFail() COMPARE()

  Loc: [tutorial4.cpp(42)]

INFO  : testDate::testExpectedFail() Compared values are not the same

  Actual (1): 1
  Expected (2): 2
  Loc: [tutorial4.cpp(45)]

XFAIL  : testDate::testExpectedFail() 1 is not 2, even for very small 2

  Loc: [tutorial4.cpp(45)]

PASS  : testDate::testExpectedFail() INFO  : testDate::cleanupTestCase() entering PASS  : testDate::cleanupTestCase() Totals: 3 passed, 0 failed, 0 skipped

• • • • • • • • • Finished testing of testDate *********

As you can see from the verbose output, we expect a failure from each time we do a QCOMPARE( 1, 2);. In the first call to QEXPECT_FAIL, we use the Continue argument, so the rest of the tests will still be run. However in the second call to QEXPECT_FAILwe use the Abort and the test bails at this point. Generally it is better to use Continue unless you have a lot of closely related tests that would each need a QEXPECT_FAIL entry.

Also note that tests that are marked as expected failures are not considered to be failures, so the test function above is considered to be a pass.

If a test that is marked to be an expected failure, and it unexpectedly passes, then that is flagged as an error, as shown below:

Example 19. Unit test showing unexpected pass <syntaxhighlight lang="cpp-qt" line> void testDate::testUnexpectedPass() {

   QEXPECT_FAIL("", "1 is not 2, even for very large 1", Continue);
   QCOMPARE( 1, 1 );
   QCOMPARE( 2, 2 );

   QEXPECT_FAIL("", "1 is not 2, even for very small 2", Abort);
   QCOMPARE( 1, 1 );
   QCOMPARE( 3, 3 );

}

Example 20. Output of unit test showing unexpected pass

$ ./tutorial4/tutorial4 testUnexpectedPass -v2

• • • • • • • • • Start testing of testDate *********

Config: Using QTest library 4.1.0, Qt 4.1.0-snapshot-20051107 INFO  : testDate::initTestCase() entering PASS  : testDate::initTestCase() INFO  : testDate::testUnexpectedPass() entering INFO  : testDate::testUnexpectedPass() COMPARE()

  Loc: [tutorial4.cpp(53)]

XPASS  : testDate::testUnexpectedPass() COMPARE()

  Loc: [tutorial4.cpp(53)]

INFO  : testDate::testUnexpectedPass() COMPARE()

  Loc: [tutorial4.cpp(54)]

INFO  : testDate::testUnexpectedPass() COMPARE()

  Loc: [tutorial4.cpp(57)]

XPASS  : testDate::testUnexpectedPass() COMPARE()

  Loc: [tutorial4.cpp(57)]

INFO  : testDate::cleanupTestCase() entering PASS  : testDate::cleanupTestCase() Totals: 2 passed, 2 failed, 0 skipped

• • • • • • • • • Finished testing of testDate *********

The effect of unexpected passes on the running of the test is controlled by the second argument to QEXPECT_FAIL. If the argument is Continue and the test unexpectedly passes, then the rest of the test function will be run. If the argument is Abort, then the test will stop.

Checking debug messages and warnings

If you are testing border cases, you will likely run across the case where some kind of message will be produced using the qDebug or qWarning functions. Where a test produces a debug or warning message, that message will be logged in the test output (although it will still be considered a pass unless some other check fails), as shown in the example below:

Example 21. Unit test producing warning and debug messages <syntaxhighlight lang="cpp-qt" line> void testDate::testQdebug() {

   qWarning("warning");
   qDebug("debug");
   qCritical("critical");

}

Example 22. Output of unit test producing warning and debug messages $ ./tutorial4 testQdebug

• • • • • • • • • Start testing of testDate *********

Config: Using QTest library 4.1.0, Qt 4.1.0-snapshot-20051107 PASS  : testDate::initTestCase() QWARN  : testDate::testQdebug() warning QDEBUG : testDate::testQdebug() debug QSYSTEM: testDate::testQdebug() critical PASS  : testDate::testQdebug() PASS  : testDate::cleanupTestCase() Totals: 3 passed, 0 failed, 0 skipped

• • • • • • • • • Finished testing of testDate *********

Note that while this example produces the debug and warning messages within the test function (testQdebug), those messages would normally be propagated up from the code being tested. However the source of the messages does not make any difference to how they are handled.

If your test needs include either a clean output, or verification that appropriate messages are generated, then you will probably need the QtTest::ignoreMessage function.

Tip

Note: The ignoreMessage function can be used to ignore a message, however it might be clearer to think of this function as checking for the presence of an expected message. In particular, it is a test failure if you call ignoreMessage and the message is not generated.

An example of how ignoreMessage works is shown below.

Example 23. Example of using ignoreMessage <syntaxhighlight lang="cpp-qt" line> void testDate::testValidity() {

   QTest::ignoreMessage(QtWarningMsg, "validity warning");
   qWarning("validity warning");

}

void testDate::testValiditi() {

   QTest::ignoreMessage(QtWarningMsg, "validity warning");
   qWarning("validiti warning");

}

Example 24. Output of ignoreMessage example $ ./tutorial4 testValidity testValiditi

• • • • • • • • • Start testing of testDate *********

Config: Using QTest library 4.1.0, Qt 4.1.0-snapshot-20051107 PASS  : testDate::initTestCase() PASS  : testDate::testValidity() QWARN  : testDate::testValiditi() validiti warning INFO  : testDate::testValiditi() Did not receive message: "validity warning" FAIL!  : testDate::testValiditi() Not all expected messages were received PASS  : testDate::cleanupTestCase() Totals: 3 passed, 1 failed, 0 skipped

• • • • • • • • • Finished testing of testDate *********

Note that the warning message in testDate::testValidity has been "swallowed" by the the call to ignoreMessage.

By contrast, the warning message in testDate::testValiditi still causes a warning to be logged, because the ignoreMessage call does not match the text in the warning message. In addition, because a we expected a particular warning message and it wasn't received, the testDate::testValiditi test function fails.

Tutorial 5: Testing Qt slots and signals

An important part of Qt programming is the use of signals and slots. This section covers the support for testing of these features.

Tip

Note: If you are not familiar with Qt signals and slots, you probably should review the introduction to this feature provided in your Qt documentation. It is also available at http://doc.trolltech.com/latest/signalsandslots.html. You also might like to review Tutorial 5 in your Qt documentation. This tutorial is also available at http://doc.trolltech.com/latest/tutorial-t5.html.

Testing slots

Testing slots is very easy, because a slot is just a specially annotated method. You can call slots just like any other method you'd like to test, as shown below:

Example 25. QLabel test code, showing testing of a couple of slots <syntaxhighlight lang="cpp-qt" line>

1. include <QtTest>
2. include <QtCore>
3. include <QtGui>

class testLabel: public QObject {

   Q_OBJECT

private slots:

   void testChanges();

};

void testLabel::testChanges() {

   QLabel label;

   // setNum() is a QLabel slot, but we can just call it like any
   // other method.
   label.setNum( 3 );
   QCOMPARE( label.text(), QString("3") );

   // clear() is also a slot.
   label.clear();
   QVERIFY( label.text().isEmpty() );

}

QTEST_MAIN(testLabel)

1. include "tutorial5.moc"

Testing signals

Testing of signals is a little more difficult than testing of slots, however Qt offers a very useful class called QSignalSpy that helps a lot.

QSignalSpy is a class provided with Qt that allows you to record the signals that have been emitted from a particular QObject subclass object. You can then check that the right number of signals have been emitted, and that the right kind of signals were emitted. You can find more information on the QSignalSpy class in your Qt documentation.

An example of how you can use QSignalSpy to test a class that has signals is shown below.

Example 26. QCheckBox test code, showing testing of signals

<syntaxhighlight lang="cpp-qt" line>

1. include <QtTest>
2. include <QtCore>
3. include <QtGui>

class testCheckBox: public QObject {

   Q_OBJECT

private slots:

   void testSignals();

};

void testCheckBox::testSignals() {

   // You don't need to use an object created with "new" for
   // QSignalSpy, I just needed it in this case to test the emission
   // of a destroyed() signal.
   QCheckBox *xbox = new QCheckBox;

   // We are going to have two signal monitoring classes in use for
   // this test.
   // The first monitors the stateChanged() signal. 
   // Also note that QSignalSpy takes a pointer to the object.
   QSignalSpy stateSpy( xbox, SIGNAL( stateChanged(int) ) );
   
   // Not strictly necessary, but I like to check that I have set up
   // my QSignalSpy correctly.
   QVERIFY( stateSpy.isValid() );

   // Now we check to make sure we don't have any signals already
   QCOMPARE( stateSpy.count(), 0 );

   // Here is a second monitoring class - this one for the
   // destroyed() signal.
   QSignalSpy destroyedSpy( xbox, SIGNAL( destroyed() ) );
   QVERIFY( destroyedSpy.isValid() );

   // A sanity check to verify the initial state
   // This also shows that you can mix normal method checks with
   // signal checks.
   QCOMPARE( xbox->checkState(), Qt::Unchecked );

   // Shouldn't already have any signals
   QCOMPARE( destroyedSpy.count(), 0 );

   // If we change the state, we should get a signal.
   xbox->setCheckState( Qt::Checked );
   QCOMPARE( stateSpy.count(), 1 );

   xbox->setCheckState( Qt::Unchecked );
   QCOMPARE( stateSpy.count(), 2 );

   xbox->setCheckState( Qt::PartiallyChecked );
   QCOMPARE( stateSpy.count(), 3 );

   // If we destroy the object, the signal should be emitted.
   delete xbox;

   // So the count of objects should increase.
   QCOMPARE( destroyedSpy.count(), 1 );

   // We can also review the signals that we collected
   // QSignalSpy is really a QList of QLists, so we take the first
   // list, which corresponds to the arguments for the first signal
   // we caught.
   QList<QVariant> firstSignalArgs = stateSpy.takeFirst();
   // stateChanged() only has one argument - an enumerated type (int)
   // So we take that argument from the list, and turn it into an integer.
   int firstSignalState = firstSignalArgs.at(0).toInt();
   // We can then check we got the right kind of signal.
   QCOMPARE( firstSignalState, static_cast<int>(Qt::Checked) );

   // check the next signal - note that takeFirst() removes from the list
   QList<QVariant> nextSignalArgs = stateSpy.takeFirst();
   // this shows another way of fudging the argument types
   Qt::CheckState nextSignalState = (Qt::CheckState)nextSignalArgs.at(0).toInt();
   QCOMPARE( nextSignalState, Qt::Unchecked );

   // and again for the third signal
   nextSignalArgs = stateSpy.takeFirst();
   nextSignalState = (Qt::CheckState)nextSignalArgs.at(0).toInt();
   QCOMPARE( nextSignalState, Qt::PartiallyChecked );

}

QTEST_MAIN(testCheckBox)

1. include "tutorial5a.moc"

The first 11 lines are essentially unchanged from previous examples that we've seen. Line 15 creates the object that will be tested - as noted in the comments in lines 12-14, the only reason that I'm creating it with new is because I need to delete it in line 45 to cause the destroyed() signal to be emitted.

Line 20 sets up the first of our two QSignalSpy instances. The one in line 20 monitors the stateChanged(int) signal, and the one in line 29 monitors the destroyed() signal. If you get the name or signature of the signal wrong (for example, if you use stateChanged() instead of stateChanged(int)), then this will not be caught at compile time, but will result in a runtime failure. You can test if things were set up correctly using the isValid(), as shown in lines 24 and 30.

As shown in line 34, there is no reason why you cannot test normal methods, signals and slots in the same test.

Line 38 changes the state of the object under test, which is supposed to result in a stateChanged(int) signal being emitted. Line 39 checks that the number of signals increases from zero to one. Lines 40 and 41 repeat the process, and again in lines 42 and 43.

Line 45 deletes the object under test, and line 47 tests that the destroyed() signal has been emitted.

For signals that have arguments (such as our stateChanged(int) signal), you may also wish to check that the arguments were correct. You can do this by looking at the list of signal arguments. Exactly how you do this is fairly flexible, however for simple tests like the one in the example, you can manually work through the list using takeFirst() and check that each argument is correct. This is shown in line 52, 55 and 57 for the first signal. The same approach is shown in lines 59, 61 and 62 for the second signal, and the in lines 64 to 66 for the third signal. For a more complex set of tests, you may wish to apply some data driven techniques.

Tip

Note: You should be aware that, for some class implementations, you may need to return control to the event loop to have signals emitted. If you need this, try using the QTest::qWait() function.

Tutorial 6: Integrating with CMake

The KDE4 build tool is CMake, and I assume that you are familiar with the use of CMake. If not, you should review the CMake Tutorial first.

CMake offers quite good support for unit testing, and QTestLib tests can be easily integrated into any CMake build system.

Configuring for Testing

Tests are not built by default - you have to enable the test system, and build the tests.

You enable tests by adding an ENABLE_TESTING() line to the top of your CMakeLists.txt file.

In some configurations, there may be a build system option to turn on (or off) the compilation of tests. At this stage, you have to enable the BUILD_TESTING option in KDE4 modules, however this may go away in the near future, as later version of CMake can build the test applications on demand.

If the tests are still not building, you might want to issue make buildtests in tests directory.

Adding Tests

You add a single test to the list of all tests that can be run by using ADD_TEST, which takes a number of arguments:

• The first argument is a display name for the test. This is required.
• The second argument is the name of the executable to be run (including the path to that executable, if required). This is required.
• Any following arguments are passed to the executable. These are optional, and are usually omitted for QTestLib tests.

Note that ADD_TEST does nothing if ENABLE_TESTING() has not been run.

When choosing a display name, you should adopt a similar convention to the existing tests (e.g. in kdelibs/kdecore, all the display names start with kdecore-, which makes it easy to find the failing test if you run all the tests in kdelibs). If there are no existing tests, using a submodule prefix is probably a good idea.

The executable doesn't need to be something you build, but it will be for QTestLib, and many other tests. Remember that you need to specify the path, so this normally looks something like "${EXECUTABLE_OUTPUT_PATH}/testapp".

KDE4 CMake Recipe for QTestLib

If you are working in a KDE4 environment, then it is pretty easy to get CMake set up to build and run a test on demand.

set( kwhatevertest_SRCS kwhatevertest.cpp )

kde4_add_unit_test( kwhatevertest

 TESTNAME ksubmodule-kwhatevertest
 ${kwhatevertest_SRCS}

)

target_link_libraries( kwhatevertest

 ${KDE4_KDECORE_LIBS}
 ${QT_QTTEST_LIBRARY}

)

You are meant to replace "kwhatevertest" with the name of your test application. The target_link_libraries() line will need to contain whatever libraries are needed for the feature you are testing, so if it is a GUI feature, you'll likely need to use "${KDE4_KDEUI_LIBS}.

Running the Tests

To run all tests, you can just "make test". This will work through each of the tests that have been added (at any lower level) using kde4_add_unit_test, provided that you have include(KDE4Defaults) in your CMakeLists.txt.

This is equivalent to running the "ctest" executable with no arguments. If you want finer grained control over which tests are run or the output format, you can use additional arguments. These are explained in the ctest man page ("man ctest" on a *nix system, or run "ctest --help-full").

To run a single test, use ./tutorial1.shell rather than just ./tutorial1, this will make it use the locally-built version of the shared libraries you're testing, rather than the installed ones.

Further Reading

Chapter 8 of the CMake Book provides a detailed description of how to do testing with CMake. Also see Appendix B for more on CTest and the special commands you can use.

Various sections of the CMake Wiki, especially CTest testing

Tutorial 7: Integrating with qmake

TODO

Tutorial 8: XML output

TODO

Tutorial 9: KDE specifics

For KDE specific enhancements see API dox

TODO

Alternative tools for testing

There are a range of alternative testing approaches that can be used either with unit tests, or as an addition to the unit tests.

Static tests

As noted in the introduction, unit tests are dynamic tests - they exercise the compiled code. Static tests are slightly different - they look for problems in source code, rather than making sure that the object code runs correctly.

Static test tools tend to identify completely different types of problems to unit tests, and you should seek to use them both.

For more information on using static tests, see the Code Checking tutorial.

Coverage tools and valgrind

TODO

GUI application testing - Squish and KDExecutor

Squish by froglogic and KDExecutor by Klarälvdalens Datakonsult (KDAB) are commercial tools that facilitate GUI testing.

Conclusions

TODO