Projects/KDE on Solaris

Projects/KDE on Solaris

Languages: عربي | Asturianu | Català | Česky | Kaszëbsczi | Dansk | Deutsch | English | Esperanto | Español | Eesti | فارسی | Suomi | Français | Galego | Italiano | 日本語 | 한국어 | Norwegian | Polski | Português Brasileiro | Română | Русский | Svenska | Slovenčina | Slovenščina | српски | Türkçe | Tiếng Việt | Українська | 简体中文 | 繁體中文

Oracle Solaris 10 and Oracle Solaris 11 Express are operating systems that are available for free. Read the Licensing Terms for Oracle Solaris 10 and Oracle Solaris 11 Express. IANAL, but the terms

LICENSE RIGHTS Except for any included software package or file that is licensed to you by Oracle under different license terms, we grant you a perpetual (unless terminated as provided in this agreement), nonexclusive, nontransferable, limited License to use the Programs only for the purpose of developing, testing, prototyping and demonstrating your applications, and not for any other purpose.

would appear to allow contribution of an individual to the KDE4 project. Make your own decision, or talk to your local Business legal representative...

In addition, OpenSolaris was released under the CDDL, a FOSS license, by Sun Microsystems, but Oracle disbanded the open development of the project after acquiring Sun. Whilst Solaris has its roots in BSD, it is mostly SysV. Solaris 10 is certified UNIX SUSv3. KDE4 runs on this operating system.

The KDE Project on the OpenSolaris site is intended to be the definitive source of information, but this page on TechBase is intended to collect information, porting and compilation guides, etc. Since TechBase is a wiki, this is much easier than going through the OpenSolaris editing process.

Status: For an overview of the remaining issues, see the KDE4 on Solaris status page, Updated 03/04/2011. It lists dependencies, showstopper bugs and issues with dependencies. Not much has happened on the S10 KDE4 front for a while. Trying to resurrect it again....

Oracle Solaris 11 Express nee OpenSolaris: Building on Oracle Solaris 11 Express/OpenSolaris is covered on the OpenSolaris-specific page.

This page is concerned with instructions on how to build it all.

KDE4 v4.6.0 should be able to be built on Solaris 10 with SS12.2, though there are known issues the SS12.2 and CXX Templates among other bugs

Solaris and OpenSolaris are trademarks of Oracle.

Scope

This page is about KDE4 (the KDE 4.6.0 branch; we are aiming for having KDE4.6.0 fully functional) on Oracle Solaris S10U9 and Oracle Solaris 11 Express, running initially on x86 hardware, then supporting SPARC hardware and compiled with Sun Studio 12.2.

No other KDE releases, operating system versions, compiler version (ie, not Studio 11, 12 or Sun Studio Express) or hardware platforms are the target of this project, simply because the core contributors to the project do not have them or the time to work on them.

That's not to say it will not necessarily work; people have and continue to contribute work for older hardware platforms (32-bit only like i386[P3/Athlon]). You can probably run the binaries produced by the project on other OpenSolaris releases, even OpenSolaris 2008.11 or 2009.06, but you're on your own.

On your own, that is, unless you register for Techbase and add your comments on what needed doing and what was problematic somewhere below.

We are concentrating on 4.6.0. However since Oracle has not put xcb into the Xserver in Solaris 10 or Solaris 11 Express. (which is a minor addition to the X protocol, and minor functionality in KDE), there may be some problems related to this missing feature.

The core team for KDE4 on Solaris is Adriaan de Groot, Lukas Oboril, Stefan Teleman. We'd like to thank Edward O'Callaghan, Ben Taylor and Mark Wright for their help in particular.

Standard Environment Setup

We don't have much in the way of documented KDE4 *use* on Solaris nor many reports of bugs found in daily use of the below KDE4 packages on http://bugs.kde.org/ . Thus we welcome any contributions though either bug reports, the repo or by email.

Prerequisites

Warning

The Techbase documentation gets out of date quite quickly. Do not follow it blindly; step into the IRC channel or on to the mailing list for more details or help with issues.

Getting KDE4 on your Solaris machine requires the following:

• Solaris 10U9 or patch to it. 64-bit libraries like openssl is important enough to get it there, and we have a 64-bit libusb available. Initially, to restart the S10 project, only 32-bit compiles will be done to get a proof of concept.

• CBE (Common Build Environment) 1.7.0 - tool chain to make pkgbuild work
• A check out of the RPM-style SPEC files (they automagically grab the sources for you). - I'll show you as we go.
• Oracle Studio 12.2 - Packages if you have a support contract, tarfile if you don't.
• The latest patches for SS12.2 - *if you have a support contract*.
• FOSSmercurial - pkg download to be provided soon. Can also use an old SXCE SUNWmercurial since it's all python except for a couple of libraries.
• Solaris 10 Webstack 1.5. Install mysql51 (for QT) and ruby18 (for KDEbindings) using the installer, as well as pfexec pkgadd -d sun-mysql51lib.pkg && pfexec pkgadd -d sun-apache22. We need apache22 to get the Apache Portable Runtime until these may be ported into the FOSS infrastructure. Also, a late addition is Python2.6 (sun-python26) needed for KDEbindings and KDEsdk.
• Fix /usr/include/python2.4/pyport.h
• Open Sound System Drivers
• pkgrm SUNWpixman (for S10U8, FOSSxstuff replaces it with a fixed version)
• ogl-select service needs to run for QT build ('svcadm enable ogl-select')

Patching your System

You can use Solaris 10 update 9 (S10U9). Unless you can get patches, it probably better just to start with S10U9, since anything else will be out of date by at least 18 months.

Using Patch Check Advanced (PCA) works well on S10 to handle patches for Solaris and Studio 12.2. If you have a contract, you can get current, otherwise just deal with stock Studio 12.2 since the free Studio patches died with Sun. Don't even bother with Solaris Update Manager.

Studio 12.2 This installer requires a GUI so better learn to use ssh -X if not on the localhost. On Solaris 10, there are about 5 patches out for SS12.2, so if you have a support contract, go for it. There are still some serious bugs in SS12.2, and you can help by registering with bugs.sun.com and voting for bugs that affect the Studio12.2 compiler and KDE dependencies (eigen, boost, templates). You can vote for 3 bugs at any time, so if one has a higher priority for you, remove the vote for another bug and vote the one you want.

There is a GUI for the package installer. With the GUI, there are no patch options unless there are Solaris patches required to make the compiler work. I prefer to select to remove the Japanese and Chinese locales, for obvious reasons. It's probably easier to just load from the tarball.

If you are running OSOL2008.11 or OSOL2008.05, then you will need to select the download Studio 12.2 *tarball* from the Oracle Studio Download site.

Solaris 10 Install Sun Studio 12.2.

Solaris 10 Python - Special info

If you forget to fix /usr/include/python2.4/pyport.h, FOSSboost will fail as follows: vesta% tail /tmp/FOSSboost.log pkgbuild: + chmod 755 Solaris/patch.sh pkgbuild: + bash -x ./Solaris/patch.sh boost pkgbuild: + '[' '!' -f configure ']' pkgbuild: + echo '# Checking if pyport.h is sane ... must not redeclare gethostname.' pkgbuild: # Checking if pyport.h is sane ... must not redeclare gethostname. pkgbuild: + test -f /usr/include/python2.4/pyport.h pkgbuild: + grep '^extern int gethostname' /usr/include/python2.4/pyport.h pkgbuild: extern int gethostname(char *, int); pkgbuild: + exit 1 pkgbuild: Bad exit status from /var/tmp/pkgbuild-edwardoc/pkgbuild-tmp-1.8081 (%prep)

Warning

In /usr/include/python2.4/pyport.h , there's a gethostbyname prototype; it's wrong. Commenting it out is sufficient as the make system will check for its presence with a bounded grep [ie, ^externt int gethostbyname]).

The line reads as:

extern int gethostname(char *, int);

SNV_(97<->103) - Special info

Warning

If you would like to build FOSSnas as a dep, It will fail unless you copy the following files into /usr/X11/lib/X11/config/ More info here; cat /tmp/FOSSnas.log

* Fixed in SNV103: http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6763798

* Here is a workaround:

[edward@SXCE-Workstation]:/export/home/edward:~>uname -sv SunOS snv_99

If you don't do this step you will end up with the following error : "FOSSnas | FAILED | pkgbuild build failed"

/usr/sfw/bin/wget http://xorg.freedesktop.org/archive/individual/util/xorg-cf-files-1.0.2.tar.bz2

/usr/bin/bunzip2 -cd xorg-cf-files-1.0.2.tar.bz2 | tar -xvf -

cd xorg-cf-files-1.0.2

• pfexec cp X11.rules /usr/X11/lib/X11/config/
• pfexec cp X11.tmpl /usr/X11/lib/X11/config/
• pfexec cp xorg.cf /usr/X11/lib/X11/config/
• pfexec cp xorgsite.def /usr/X11/lib/X11/config/
• pfexec cp xorgversion.def /usr/X11/lib/X11/config/
• pfexec cp xf86.rules /usr/X11/lib/X11/config/
• pfexec cp xfree86.cf /usr/X11/lib/X11/config/
• pfexec touch /usr/X11/lib/X11/config/date.def
• pfexec touch /usr/X11/lib/X11/config/host.def
• pfexec cp Imake.tmpl /usr/X11/lib/X11/config/

Setting up CBE 1.7RC1

N.B. Please check if a later version is out in : http://dlc.sun.com/osol/jds/downloads/cbe/

cd ~ ; mkdir CBE1.7 ; cd CBE1.7

• x86/x64:

/usr/sfw/bin/wget http://dlc.sun.com/osol/jds/downloads/cbe/test/desktop-cbe-1.7.0-rc1-x86.tar.bz2

/usr/bin/bunzip2 -cd desktop-cbe-1.7.0-rc1-x86.tar.bz2 | tar -xvf -

• SPARC:

/usr/sfw/bin/wget http://dlc.sun.com/osol/jds/downloads/cbe/test/desktop-cbe-1.7.0-rc1-sparc.tar.bz2

/usr/bin/bunzip2 -cd desktop-cbe-1.7.0-rc1-sparc.tar.bz2 | tar -xvf -

`cd` in and follow the README/INSTALL file.

Warning

If you didn't tell CBE where you want to build the code, it will try to put it under /opt/dtbld. That really won't work because /opt/dtbld is owned by root. Modify ~/.pkgbuildmacros and fix %_topdir to some writable directory that you want to build the code in. Most folks use ~/packages. You can also route the BUILD logs to a directory specified by: ~/.pkgtoolrc and tell "logdir:" where to put it. (~/packages/BUILDLOGS seems reasonable)

Getting KDE4-SPEC's (Release)

Simply; cd ~ ; mkdir KDE4 ; cd KDE4/

hg clone https://solaris.bionicmutton.org/hg/kde4-specs

• If you don't like using mercurial at all, you can get the tarball here; http://solaris.bionicmutton.org/hg/kde4-specs/archive/tip.tar.gz

Getting KDE4-SPEC's-460 (Unstable Testing/Development)

Simply;

cd ~ ; mkdir KDE4.X.x ; cd KDE4.X.x/

hg clone https://solaris.bionicmutton.org/hg/kde4-specs-460

• If you don't like using mercurial at all, you can get the tarball here; http://solaris.bionicmutton.org/hg/kde4-specs-460/archive/tip.tar.gz

N.B. The above is also for contributing back (which this mail message is all about). The *-specs-dev repo is public and writable (over https). So we welcome you too can push fixes back on to it; A review will happen before things end up in *-specs.

KDE4 Compilation and Installation of (Stable)

cd kde4-specs/ ; hg up ; cd specs/

more README

• Read though and take note of anything important you may need to know since this was last updated.

/opt/dtbld/bin/env.sh

• Note: This command will start a subshell. Be careful, because environment variables (notably PATH) set in your shell startup files will override those set up by this command.

make rebuild-CBEcmake rebuild-CBEyasm

• This updates cmake from the CBE base because there are some Solaris/Studio 12 fixes there in the updated package.

make build-KDEconsolidation

This will now go off and build KDE4 and anything else needed as SysV packages. Come back in about 24h depending on your hardware.

What to expect after a Clean Build

                        FOSSnas |      PASSED |
                    FOSSncurses |      PASSED |
                    FOSSopencdk |      PASSED |
                   FOSSopenldap |      PASSED |
                       FOSSpcre |      PASSED |
                     FOSSphonon |      PASSED |
                FOSSqimageblitz |      PASSED |
                         FOSSqt |      PASSED |
                   FOSSreadline |      PASSED |
                    FOSSsoprano |      PASSED |
                     FOSSsqlite |      PASSED |
                     FOSSstdcxx |      PASSED |
                     FOSSstrigi |      PASSED |
                      FOSSxprop |      PASSED |
                   KDEbase-apps |      PASSED |
                KDEbase-runtime |      PASSED |
              KDEbase-workspace |      PASSED |
              KDEdt-integration |      PASSED |
                        KDElibs |      PASSED |
                         KDEpim |      PASSED |
                     KDEpimlibs |      PASSED |
                         KDEsdk |      PASSED |
                 FOSSlibiconvwo |      PASSED |
                  FOSSgettextwo |      PASSED |
               FOSScyrus-saslwo |      PASSED |
            FOSSmit-kerberos5wo |      PASSED |
                 FOSSopenldapwo |      PASSED |

Getting help

As usual, the IRC channel is a good place to start, but you must be able to pastebin compilation errors in order to get any help. The IRC channel is never too busy. #kde-solaris4 on irc.freenode.net . However, keep in mind that IRC is a live medium and it may not be the best place to ask questions. The mailing list kde-discuss at opensolaris.org is much more patient.

Also, you are expected to do your homework. Compiling KDE4 on Solaris is not for the faint of heart and you really need to know your way around compiling stuff and dealing with system software installation.

Binary Packages

No binary packages for KDE4 for Solaris 10 currently