Projects/Tellico/Compiling: Difference between revisions

From KDE TechBase
(add note for git branch)
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
= Download Tellico =
= Download Tellico =


To compile [[Projects/Tellico|Tellico]] from the source code, you must [http://tellico-project.org/download download the source package] or get the code from the git repository.
To compile [https://userbase.kde.org/Tellico Tellico] from the source code, you must [http://tellico-project.org/download download the source package] or get the code from the git repository.


== Source Package ==
== Source Package ==
If you download the source package, extract all of the files, which should create a directory named ''tellico-2.0/''.
If you download the source package, extract all of the files, which should create a directory named ''tellico-3.0/''.
<syntaxhighlight lang="text">
<syntaxhighlight lang="text">
% tar xjvf tellico-2.0.tar.bz2
% tar xJvf tellico-3.0.tar.xz
% cd tellico-2.0
% cd tellico-3.0
</syntaxhighlight>
</syntaxhighlight>


{{Note|These instructions use Tellico 2.0 as an example. For other versions, replace 2.0 in the commands below.}}
{{Note|These instructions use Tellico 3.0 as an example. For other versions, replace 3.0 in the commands below.}}


== Current Development Source ==
== Current Development Source ==
The source code is stored in KDE's git system, in the ''extragear/office'' folder. Please refer to [[Development/Git/Configuration|Git Configuration]] for more help with using KDE and git.
The source code is developed using KDE's git infrastructure. Please refer to [[Development/Git/Configuration|Git Configuration]] for more help with using KDE and git.
<syntaxhighlight lang="text">
<syntaxhighlight lang="text">
% git clone git://anongit.kde.org/tellico
% git clone git://anongit.kde.org/tellico
% cd tellico
% cd tellico
% git checkout 2.3
% git checkout 3.2
</syntaxhighlight>
</syntaxhighlight>


{{Note|The current stable branch is ''2.3''. The ''master'' branch has had some changes that may make it unstable. at the moment.}}
{{Note|The current stable branch is 3.2, while the master branch is being used for continued development. }}


= Install required libraries =
= Install required libraries =
Required libraries are (perhaps incomplete):
The list of required libraries in Debian and Ubuntu is:
<syntaxhighlight lang="text">
<syntaxhighlight lang="text">
% apt-get install libpoppler-qt4-dev libtaglib-ocaml-dev libexempi-dev libyaz-dev libqimageblitz4 libqimageblitz-dev  
% apt-get install libpoppler-qt5-dev libtaglib-ocaml-dev libexempi-dev libyaz-dev  
</syntaxhighlight>
</syntaxhighlight>
Other distributions might use different package names.


In addition, the Taglib and yaz libraries are highly recommended.
After that, there are three steps to build and install Tellico.
After that, there are three steps to build and install Tellico.


Line 34: Line 37:
The compilation environment must be configured to your system first. The tool used to create the configuration is ''[http://www.cmake.org CMake]''. CMake will check that you have all the required development libraries and set up the files for compiling.
The compilation environment must be configured to your system first. The tool used to create the configuration is ''[http://www.cmake.org CMake]''. CMake will check that you have all the required development libraries and set up the files for compiling.


In the ''tellico-2.0/'' directory, create a directory for building, named ''build/'', just to keep things clear.
In the ''tellico-3.0/'' directory, create a directory for building, named ''build/'', just to keep things clear.
<syntaxhighlight lang="text">
<syntaxhighlight lang="text">
% mkdir build
% mkdir build
% cd build
% cd build
% cmake .. -DCMAKE_INSTALL_PREFIX=`kde4-config --prefix`
% cmake .. -DCMAKE_INSTALL_PREFIX=`kf5-config --prefix`
</syntaxhighlight>
</syntaxhighlight>


{{Note|Note the backquotes in the cmake command, they are important.}}
{{Note|Note the backquotes in the cmake command, they are important.}}


The tells CMake to use the top-level ''tellico-2.0/'' directory as the source directory, and to set the application to install in the same place as other KDE applications. Later, when you install Tellico, you will likely need root access, either through the root password or ''sudo''. To install to a different
The tells CMake to use the top-level ''tellico-3.0/'' directory as the source directory, and to set the application to install in the same place as other KDE applications. Later, when you install Tellico, you will likely need root access, either through the root password or ''sudo''. To install to a different
location, use change the ''-DCMAKE_INSTALL_PREFIX'' option. Remember, the ''KDEDIRS'' variable must be updated if you install in a nonstandard location.
location, use change the ''-DCMAKE_INSTALL_PREFIX'' option.


If you do not have the necessary libraries for building tellico, CMake will fail and show you an error, listing which libraries you lack. Some libraries are required for building. Some are optional for additional functionality. The library packages may have different names, depending on your distribution.
If you do not have the necessary libraries for building tellico, CMake will fail and show you an error, listing which libraries you lack. Some libraries are required for building. Some are optional for additional functionality. The library packages may have different names, depending on your distribution.
If cmake complains about QJSON not being found, it needs to be downloaded to ''yourdir'' (outside of the tellico directory):
<syntaxhighlight lang="text">
% cd /path_to_yourdir
% git clone git://gitorious.org/qjson/qjson.git qjson
</syntaxhighlight>
Then use this cmake command instead:
<syntaxhighlight lang="text">
% cmake .. -DCMAKE_INSTALL_PREFIX=`kde4-config --prefix` -DCMAKE_MODULE_PATH=/path_to_yourdir/qjson/cmake/modules/
</syntaxhighlight>


==Options==
==Options==
Line 63: Line 56:
To include support for debugging Tellico, you should pass the ''-DCMAKE_BUILD_TYPE=debug'' option to cmake. ''-DCMAKE_BUILD_TYPE=release'' is for stripped, non-debugging compilation.
To include support for debugging Tellico, you should pass the ''-DCMAKE_BUILD_TYPE=debug'' option to cmake. ''-DCMAKE_BUILD_TYPE=release'' is for stripped, non-debugging compilation.


Tellico has many unit tests for checking some parts of the code for problems. The tests can be compiled by using ''-DKDE4_BUILD_TESTS=TRUE'' and then running
Tellico has many unit tests for checking some parts of the code for problems. The tests can be compiled by using ''-DBUILD_TESTS=TRUE'' and then running
<syntaxhighlight lang="text">% make test</syntaxhighlight>
<syntaxhighlight lang="text">% make test</syntaxhighlight>


Line 84: Line 77:
= Enjoy =
= Enjoy =


You can send questions to the [http://tellico-project.org/mailing-list tellico-users mailing list].
You can send questions and comments to the [http://tellico-project.org/mailing-list tellico-users mailing list].


= Uninstall =
If you need to uninstall Tellico
If you need to uninstall Tellico
<syntaxhighlight lang="text">% sudo make uninstall</syntaxhighlight>
<syntaxhighlight lang="text">% sudo make uninstall</syntaxhighlight>

Latest revision as of 00:36, 20 September 2019

Download Tellico

To compile Tellico from the source code, you must download the source package or get the code from the git repository.

Source Package

If you download the source package, extract all of the files, which should create a directory named tellico-3.0/.

% tar xJvf tellico-3.0.tar.xz
% cd tellico-3.0
Note
These instructions use Tellico 3.0 as an example. For other versions, replace 3.0 in the commands below.


Current Development Source

The source code is developed using KDE's git infrastructure. Please refer to Git Configuration for more help with using KDE and git.

% git clone git://anongit.kde.org/tellico
% cd tellico
% git checkout 3.2
Note
The current stable branch is 3.2, while the master branch is being used for continued development.


Install required libraries

The list of required libraries in Debian and Ubuntu is:

% apt-get install libpoppler-qt5-dev libtaglib-ocaml-dev libexempi-dev libyaz-dev

Other distributions might use different package names.

In addition, the Taglib and yaz libraries are highly recommended.

After that, there are three steps to build and install Tellico.

Configure

The compilation environment must be configured to your system first. The tool used to create the configuration is CMake. CMake will check that you have all the required development libraries and set up the files for compiling.

In the tellico-3.0/ directory, create a directory for building, named build/, just to keep things clear.

% mkdir build
% cd build
% cmake .. -DCMAKE_INSTALL_PREFIX=`kf5-config --prefix`
Note
Note the backquotes in the cmake command, they are important.


The tells CMake to use the top-level tellico-3.0/ directory as the source directory, and to set the application to install in the same place as other KDE applications. Later, when you install Tellico, you will likely need root access, either through the root password or sudo. To install to a different location, use change the -DCMAKE_INSTALL_PREFIX option.

If you do not have the necessary libraries for building tellico, CMake will fail and show you an error, listing which libraries you lack. Some libraries are required for building. Some are optional for additional functionality. The library packages may have different names, depending on your distribution.

Options

In order to include support for using a webcam to scan barcodes, you must have the libv4l library installed and include -DENABLE_WEBCAM=true when you run cmake.

To include support for debugging Tellico, you should pass the -DCMAKE_BUILD_TYPE=debug option to cmake. -DCMAKE_BUILD_TYPE=release is for stripped, non-debugging compilation.

Tellico has many unit tests for checking some parts of the code for problems. The tests can be compiled by using -DBUILD_TESTS=TRUE and then running

% make test

Compile

Make is used to actually compile Tellico.

% make

There will likely be some warnings during compilation, but at the end, if you see something like

[100%] Built target tellico

then the compilation completed successfully.

Install

To install Tellico alongside other KDE applications, you will likely need to use the sudo command.

% sudo make install

Enter your password, and Tellico should be installed and should show up in the KDE menu, likely in the Office menu. Or, run it from the command-line.

% tellico

Enjoy

You can send questions and comments to the tellico-users mailing list.

Uninstall

If you need to uninstall Tellico

% sudo make uninstall