Difference between revisions of "Getting Started/Build/KDE4/on virtual machines"

Jump to: navigation, search
(kdepimlibs is again needed :()
(64 intermediate revisions by one user not shown)
Line 1: Line 1:
{{Infobox tutorial|time=4 hours|type=HowTo|distribution=SUSE Linux 11.3|happyreaders=2|unhappyreaders=0}}
+
{{Infobox tutorial|time=3 hours|type=HowTo|distribution=SUSE Linux 12.1|happyreaders=2|unhappyreaders=0}}
  
This describes the potential of using a virtual machine to contain development, for testing system level KDE tools like KDM without mucking up the rest of your system. Also, virtual machine snapshots can be shared with casual developers so they can have an up to date, rich environment for their minor fixes.
+
This describes how to use a virtual machine for building the latest KDE from sources.
 
+
In the included example, a person sets up KDE trunk on a Suse 11.3 Linux Virtual Machine. 
+
 
+
Basically nothing special except using root account directly.. And it is in a virtual machine, Note that the build requirements are moving targets so examples are all but useless.
+
 
+
We use KVM because it is faster than other free alternatives, and can use multiple processors.
+
  
 
= Virtual Machine Setup =
 
= Virtual Machine Setup =
Create a KVM virtual machine. KDE 4 fits into 10 GB minimum, [[User:Tstaerk|I]] recommend 40GB, one partition. As much ram as you can spare, You will need at least 1GB ram for the virtual machine, 4 doesnt hurt if you have it, install SUSE Linux 11.3.
+
Create a virtual machine, e.g. using [http://www.linuxintro.org/wiki/VMWare VMware Player]. Regarding harddisk: KDE 4 fits into 10 GB, however [[User:Tstaerk|I]] recommend 40GB, one partition. Regarding RAM: You will need at least 1GB ram for the virtual machine, of course more is better.
  
 
;You will need to set your SUSE CD as your virtual machine's cdrom.  
 
;You will need to set your SUSE CD as your virtual machine's cdrom.  
Line 22: Line 16:
 
  chkconfig sshd on
 
  chkconfig sshd on
 
Inside the VM, install some needed packages:
 
Inside the VM, install some needed packages:
  yast -i libopenssl-devel subversion gcc-c++ boost-devel libbz2-devel libxml2-devel pcre-devel \
+
  yast -i libqt4-devel libsoprano-devel pcre-devel libxslt-devel libxml2-devel docbook-xsl-stylesheets git cmake \
libxslt-devel giflib-devel libjpeg-devel libgpgme-devel xorg-x11-devel glib2-devel libpng-devel \
+
  libdbusmenu-qt-devel giflib-devel strigi-devel libQtWebKit-devel libqimageblitz-devel libical-devel libgpgme-devel
  make dbus-1-devel taglib-devel \
+
libmysqlclient-devel libmysqld-devel cmake libical-devel git cyrus-sasl-devel libredland-devel \
+
libqt4-devel docbook-xsl-stylesheets libQtWebKit-devel phonon-devel
+
  
 
;Now it is time to do a snapshot or clone from your VM.
 
;Now it is time to do a snapshot or clone from your VM.
 
You will be able to return to this machine state whenever you want.
 
You will be able to return to this machine state whenever you want.
(you may want to do this again after you have downloaded all the stuff but before you muck with stuff)
 
  
 
== a few more steps ==
 
== a few more steps ==
Line 46: Line 36:
 
  alias makeqt="./configure -dbus -openssl -plugin-sql-mysql -libdir /usr/lib64 -prefix /usr && make -j8 && make install"
 
  alias makeqt="./configure -dbus -openssl -plugin-sql-mysql -libdir /usr/lib64 -prefix /usr && make -j8 && make install"
 
  export QTDIR=/usr
 
  export QTDIR=/usr
 +
EOF
 +
cat >.gitconfig<<EOF
 +
[url "git://anongit.kde.org/"]
 +
    insteadOf = kde:
 +
[url "ssh://git@git.kde.org/"]
 +
    pushInsteadOf = kde:
 
  EOF
 
  EOF
 
Now activate this file
 
Now activate this file
Line 59: Line 55:
 
  alias makeqt="./configure -dbus -openssl -plugin-sql-mysql -prefix /usr && make -j8 && make install"
 
  alias makeqt="./configure -dbus -openssl -plugin-sql-mysql -prefix /usr && make -j8 && make install"
 
  export QTDIR=/usr
 
  export QTDIR=/usr
 +
EOF
 +
cat >.gitconfig<<EOF
 +
[url "git://anongit.kde.org/"]
 +
    insteadOf = kde:
 +
[url "ssh://git@git.kde.org/"]
 +
    pushInsteadOf = kde:
 
  EOF
 
  EOF
 
Now activate this file
 
Now activate this file
Line 66: Line 68:
 
If something fails you may need to make clean.
 
If something fails you may need to make clean.
  
== kdesupport ==
+
== automoc ==
 +
automoc is needed for akonadi.
 
  cd
 
  cd
svn co svn://anonsvn.kde.org/home/kde/trunk/kdesupport
+
  git clone kde:automoc
cd kdesupport
+
  cd automoc
cmakekde
+
 
+
== soprano ==
+
cd
+
  git clone git://anongit.kde.org/soprano
+
  cd soprano
+
 
  cmakekde
 
  cmakekde
  
Line 81: Line 78:
 
Akonadi keeps personal information management data in a mysql database. It is needed for KDEPIMLIBS.
 
Akonadi keeps personal information management data in a mysql database. It is needed for KDEPIMLIBS.
 
  cd
 
  cd
  git clone git://anongit.kde.org/akonadi
+
  git clone kde:akonadi
 
  cd akonadi
 
  cd akonadi
cmakekde
 
 
== automoc ==
 
cd
 
git clone git://anongit.kde.org/automoc
 
cd automoc
 
 
  cmakekde
 
  cmakekde
  
 
== libattica ==
 
== libattica ==
 
  cd
 
  cd
  git clone git://git.kde.org/attica
+
  git clone kde:attica
 
  cd attica
 
  cd attica
cmakekde
 
 
== strigi ==
 
=== libstream ===
 
cd
 
git clone git://anongit.kde.org/libstreams
 
cd libstreams
 
cmakekde
 
 
=== libstreamanalyzer ===
 
cd
 
git clone git://anongit.kde.org/libstreamanalyzer
 
cd libstreamanalyzer
 
cmakekde
 
 
== dbusmenuqt ==
 
cd
 
git clone git://gitorious.org/dbusmenu/dbusmenu-qt.git
 
cd dbusmenu-qt
 
 
  cmakekde
 
  cmakekde
  
 
== shared desktop ontologies ==
 
== shared desktop ontologies ==
 +
shared desktop ontologies is needed by kdepimlibs in order to build Nepomuk (which is a part of kdelibs)
 
  cd
 
  cd
  wget http://downloads.sourceforge.net/project/oscaf/shared-desktop-ontologies/0.5/shared-desktop-ontologies-0.5.tar.bz2?r=http%3A%2F%2Fsourceforge.net%2Fapps%2Ftrac%2Foscaf%2F&ts=1283713100&use_mirror=freefr
+
  wget http://downloads.sourceforge.net/project/oscaf/shared-desktop-ontologies/0.9/shared-desktop-ontologies-0.9.0.tar.bz2
  bunzip2 shared-desktop-ontologies-0.5.tar.bz2
+
  bunzip2 shared-desktop-ontologies-0.9.0.tar.bz2
  tar xvf shared-desktop-ontologies-0.5.tar
+
  tar xvf shared-desktop-ontologies-0.9.0.tar
  cd shared-desktop-ontologies-0.5/
+
  cd shared-desktop-ontologies-0.9.0/
 
  cmake . && make && make install
 
  cmake . && make && make install
  
== qt ==
+
== phonon ==
cmake will find out where qt is installed by calling qmake, so make sure your qmake is installed over the existing one on /usr/bin.
+
Phonon is needed for kdebase-runtime
 
  cd
 
  cd
  wget http://get.qt.nokia.com/qt/source/qt-everywhere-opensource-src-4.7.1.tar.gz
+
  git clone git://anongit.kde.org/phonon
tar xvzf qt-everywhere-opensource-src-4.7.1.tar.gz
+
  cd phonon
  cd qt-everywhere-opensource-src-4.7.1
+
  cmakekde
  ./configure -bindir /usr/bin && make -j8 && make install
+
  
 
== kdelibs ==
 
== kdelibs ==
 
KDELIBS requires an out-of-source build, that is why it is more complicated to build:
 
KDELIBS requires an out-of-source build, that is why it is more complicated to build:
 
 
  cd
 
  cd
  svn co svn://anonsvn.kde.org/home/kde/trunk/KDE/kdelibs
+
  git clone kde:kdelibs
 
  mkdir kdelibs-build
 
  mkdir kdelibs-build
 
  cd kdelibs-build
 
  cd kdelibs-build
Line 145: Line 116:
  
 
== kdepimlibs ==
 
== kdepimlibs ==
 +
kdepimlibs is needed for kde-runtime.
 
  cd
 
  cd
  svn co svn://anonsvn.kde.org/home/kde/trunk/KDE/kdepimlibs
+
  git clone kde:kdepimlibs
 
  cd kdepimlibs
 
  cd kdepimlibs
 +
cmakekde
 +
 +
== kactivities ==
 +
kactivities is needed for kde-workspace.
 +
cd
 +
git clone kde:kactivities
 +
cd kactivities
 
  cmakekde
 
  cmakekde
  
 
== kdebase ==
 
== kdebase ==
 
  cd  
 
  cd  
  svn co svn://anonsvn.kde.org/home/kde/trunk/KDE/kdebase
+
  git clone kde:kde-baseapps
  cd kdebase
+
git clone kde:konsole
 +
git clone kde:kde-workspace
 +
git clone kde:kde-runtime
 +
  cd kde-baseapps
 +
cmakekde
 +
cd
 +
cd konsole
 +
cmakekde
 +
cd
 +
cd kde-workspace
 +
cmakekde
 +
cd
 +
cd kde-runtime
 
  cmakekde
 
  cmakekde
 
= Config =
 
First allow root login. You will need it as you do not have another login:
 
sed -i "s/AllowRootLogin.*/AllowRootLogin=true/g" /usr/local/share/config/kdm/kdmrc
 
Now stop your running display manager:
 
/etc/init.d/xdm stop
 
And start your self-compiled display manager:
 
kdm
 
To enable automated startup of your kdm, you need to change some SUSE-specific paths in /etc/init.d/xdm:
 
KDM_BIN=/usr/local/bin/kdm
 
KDM4_BIN=/usr/local/bin/kdm
 

Revision as of 15:52, 10 June 2012


Tutorial Factbox
Time to replay 3 hours
Example Distro SUSE Linux 12.1
Type HowTo
Happy readers 2
Unhappy readers 0

This describes how to use a virtual machine for building the latest KDE from sources.

Contents

Virtual Machine Setup

Create a virtual machine, e.g. using VMware Player. Regarding harddisk: KDE 4 fits into 10 GB, however I recommend 40GB, one partition. Regarding RAM: You will need at least 1GB ram for the virtual machine, of course more is better.

You will need to set your SUSE CD as your virtual machine's cdrom.

setup for SSH

To be able to log in to your VM using ssh, stop and disable the firewall:

rcSuSEfirewall2 stop
chkconfig SuSEfirewall2_setup off
chkconfig SuSEfirewall2_init off
/etc/init.d/sshd start
chkconfig sshd on

Inside the VM, install some needed packages:

yast -i libqt4-devel libsoprano-devel pcre-devel libxslt-devel libxml2-devel docbook-xsl-stylesheets git cmake \
libdbusmenu-qt-devel giflib-devel strigi-devel libQtWebKit-devel libqimageblitz-devel libical-devel libgpgme-devel
Now it is time to do a snapshot or clone from your VM.

You will be able to return to this machine state whenever you want.

a few more steps

Open a console as root

su -

on an x64 distribution

If and only if you have a /lib64 path, you are on an x64 distribution. Make sure you have the needed environment variables and alias set by having a file /root/.bashrc.

cd
cat >.bashrc<<EOF 
export KDEDIR=/usr/local         
alias cmakekde="cmake . -DCMAKE_INSTALL_PREFIX=\$KDEDIR -DLIB_SUFFIX=64 -DCMAKE_BUILD_TYPE=debugfull && make -j8 && make install"
alias cmakekdelibs="cmake ../kdelibs -DCMAKE_INSTALL_PREFIX=\$KDEDIR -DLIB_SUFFIX=64 -DCMAKE_BUILD_TYPE=debugfull && make -j8 && make install"
alias makeqt="./configure -dbus -openssl -plugin-sql-mysql -libdir /usr/lib64 -prefix /usr && make -j8 && make install"
export QTDIR=/usr
EOF
cat >.gitconfig<<EOF
[url "git://anongit.kde.org/"]
    insteadOf = kde:
[url "ssh://git@git.kde.org/"]
    pushInsteadOf = kde:
EOF

Now activate this file

. /root/.bashrc

on another distribution (incl 32bit)

Make sure you have the needed environment variables and alias set by having a file /root/.bashrc.

cd
cat >.bashrc<<EOF
export KDEDIR=/usr/local         
alias cmakekde="cmake . -DCMAKE_INSTALL_PREFIX=\$KDEDIR -DCMAKE_BUILD_TYPE=debugfull && make -j8 && make install"
alias cmakekdelibs="cmake ../kdelibs -DCMAKE_INSTALL_PREFIX=\$KDEDIR -DCMAKE_BUILD_TYPE=debugfull && make -j8 && make install"
alias makeqt="./configure -dbus -openssl -plugin-sql-mysql -prefix /usr && make -j8 && make install"
export QTDIR=/usr
EOF
cat >.gitconfig<<EOF
[url "git://anongit.kde.org/"]
    insteadOf = kde:
[url "ssh://git@git.kde.org/"]
    pushInsteadOf = kde:
EOF

Now activate this file

. /root/.bashrc

Aquire and Build KDE as root

If something fails you may need to make clean.

automoc

automoc is needed for akonadi.

cd
git clone kde:automoc
cd automoc
cmakekde

akonadi

Akonadi keeps personal information management data in a mysql database. It is needed for KDEPIMLIBS.

cd
git clone kde:akonadi
cd akonadi
cmakekde

libattica

cd
git clone kde:attica
cd attica
cmakekde

shared desktop ontologies

shared desktop ontologies is needed by kdepimlibs in order to build Nepomuk (which is a part of kdelibs)

cd
wget http://downloads.sourceforge.net/project/oscaf/shared-desktop-ontologies/0.9/shared-desktop-ontologies-0.9.0.tar.bz2
bunzip2 shared-desktop-ontologies-0.9.0.tar.bz2
tar xvf shared-desktop-ontologies-0.9.0.tar
cd shared-desktop-ontologies-0.9.0/
cmake . && make && make install

phonon

Phonon is needed for kdebase-runtime

cd
git clone git://anongit.kde.org/phonon
cd phonon
cmakekde

kdelibs

KDELIBS requires an out-of-source build, that is why it is more complicated to build:

cd
git clone kde:kdelibs
mkdir kdelibs-build
cd kdelibs-build
cmakekdelibs

Verify it has been correctly installed - the following must be possible:

kde4-config --prefix
/usr/local

kdepimlibs

kdepimlibs is needed for kde-runtime.

cd
git clone kde:kdepimlibs
cd kdepimlibs
cmakekde

kactivities

kactivities is needed for kde-workspace.

cd
git clone kde:kactivities
cd kactivities
cmakekde

kdebase

cd 
git clone kde:kde-baseapps
git clone kde:konsole
git clone kde:kde-workspace
git clone kde:kde-runtime 
cd kde-baseapps
cmakekde
cd
cd konsole
cmakekde
cd
cd kde-workspace
cmakekde
cd
cd kde-runtime
cmakekde


KDE® and the K Desktop Environment® logo are registered trademarks of KDE e.V.Legal