Development/Tutorials/Localization/i18n Build Systems: Difference between revisions

From KDE TechBase
(Added note where to put extraJsonTranslationKeys.txt)
 
(43 intermediate revisions by 13 users not shown)
Line 14: Line 14:
Now that your application is ready to be localized, we next look at how to incorporate the necessary mechanisms into the CMake build system of your application.
Now that your application is ready to be localized, we next look at how to incorporate the necessary mechanisms into the CMake build system of your application.


First we'll explain the "theory" of the steps that need to happen from extracting message strings to installing the generated .po files. After that we'll look at how to implement those steps ([[#Theory: The xgettext toolchain]]). If your application is developed in KDE's subversion repository, many of those steps will happen automatically (see [[#handling i18n in KDE's subversion repository]]). Else you will want to read on in the [[#handling i18n in third party applications]] section.
First we'll explain the "theory" of the steps that need to happen from extracting message strings to installing the generated .po files. After that we'll look at how to implement those steps ([[#Theory: The xgettext toolchain]]). If your application is developed in KDE's repositories, many of those steps will happen automatically (see [[#Handling i18n in KDE's repositories]]). Else you will want to read on in the [[#Handling i18n outside KDE's repositories]] section.


== Theory: The xgettext toolchain ==
== Theory: The xgettext toolchain ==
Line 41: Line 41:
=== Installing the message catalogs ===
=== Installing the message catalogs ===


The compiled message catalogs need to be installed alongside the application. In KDE, the standard location for message catalogs is {{path|$KDEDIR/share/locale/xx/LC_MESSAGES/}}.
The compiled message catalogs need to be installed alongside the application. In KDE, the standard location for message catalogs is {{path|$DATAROOTDIR/locale/xx/LC_MESSAGES/}}.


=== Using the message catalogs ===
=== Using the message catalogs ===
Line 49: Line 49:
For some special cases, such as plugins, look at [[#Runtime Loading Of Catalogs]].
For some special cases, such as plugins, look at [[#Runtime Loading Of Catalogs]].


== handling i18n in KDE's subversion repository ==
== Handling i18n in KDE's repositories ==


If your application is developed inside KDE's subversion repository, most of the steps outlined above are automated. In this case, generally, all you will need to do is provide a simple script called {{path|Messages.sh}}, which we will look at below.
If your application is developed inside KDE's repositories, most of the steps outlined above are automated. In this case, generally, all you will need to do is provide a simple script called {{path|Messages.sh}}, which we will look at below.
 
In addition, if your top-level folder and .pot file have the same name, the svn2dist script will automatically include .po files when you use it to make a source tarball for your app.  


Of course, for the curious, a more detailed account of what happens behind the scenes is also provided.
Of course, for the curious, a more detailed account of what happens behind the scenes is also provided.
Line 59: Line 57:
=== Writing a Messages.sh script ===
=== Writing a Messages.sh script ===


Basically, the only thing that is necessary to prepare and install translations for applications in KDE's subversion repository, is to provide information, which sources, ui-files or tips need to be translated. For this purpose, you write a small script called {{path|Messages.sh}} and place it in your sources. Here is an example with inline comments:
Basically, the only thing that is necessary to prepare and install translations for applications in KDE's repositories, is to provide information, which sources, ui-files or tips need to be translated. For this purpose, you write a small script called {{path|Messages.sh}} and place it in your sources. Here is an example with inline comments:


<syntaxhighlight lang="cpp-qt">
<syntaxhighlight lang="bash">
#!bin/sh
#!/bin/sh


# invoke the extractrc script on all .ui, .rc, and .kcfg files in the sources
# invoke the extractrc script on all .ui, .rc, and .kcfg files in the sources
# the results are stored in a pseudo .cpp file to be picked up by xgettext.
# the results are stored in a pseudo .cpp file to be picked up by xgettext.
$EXTRACTRC `find . -name \*.rc -o -name \*.ui -o -name \*.kcfg` >> rc.cpp
$EXTRACTRC `find . -name \*.rc -o -name \*.ui -o -name \*.kcfg` >> rc.cpp
# invoke the grantlee extract script for translatable string from Grantlee themes
$EXTRACT_GRANTLEE_TEMPLATE_STRINGS `find . -name \*.html` >> html.cpp
# if your application contains tips-of-the-day, call preparetips as well.
# if your application contains tips-of-the-day, call preparetips as well.
$PREPARETIPS > tips.cpp
$PREPARETIPS > tips.cpp
Line 74: Line 74:
</syntaxhighlight>
</syntaxhighlight>


As you can see, this script contains only three actual lines of code, and not all may even be needed. The $XGETTEXT, $PREPARETIPS, $EXTRACTRC, and $podir environment variables are predefined, you do not need to worry about setting these. The only thing that you will need to do is to replace "APPNAME" with the name of your application (but see [[#Naming .pot Files]] for exceptions).
As you can see, this script contains only four actual lines of code, and not all may even be needed. The $XGETTEXT, $PREPARETIPS, $EXTRACTRC, $EXTRACT_GRANTLEE_TEMPLATE_STRINGS and $podir environment variables are predefined, you do not need to worry about setting these. The only thing that you will need to do is to replace "APPNAME" with the name of your application (but see [[#Naming .pot Files]] for exceptions).


Translatable strings are automatically extracted from C++ files. For non-C++ files, the following scripts are used
* $XGETTEXT - Extract i18n translatable strings from C++ files
* $EXTRACT_TR_STRINGS - Extract Qt tr translatable strings from C++ files for Qt5-based projects
* $EXTRACTRC - Extract translatable strings from xml configuration and ui files.
* $EXTRACTRC - Extract translatable strings from xml configuration and ui files.
* $EXTRACT_GRANTLEE_TEMPLATE_STRINGS - Extract translatable strings from Grantlee template files.
* $EXTRACT_GRANTLEE_TEMPLATE_STRINGS - Extract translatable strings from Grantlee template files.


Try to make sure your Messages.sh script collects only those messages that are really needed. If in doubt, look at other Messages.sh files in the KDE subversion repository for inspiration, or -- of course -- ask.
Try to make sure your Messages.sh script collects only those messages that are really needed. If in doubt, look at other Messages.sh files in the KDE repositories for inspiration, or -- of course -- [https://mail.kde.org/mailman/listinfo/kde-i18n-doc ask].
 
=== Testing your Messages.sh script ===
 
To test your Messages.sh script, you need a checkout of the l10n scripts. To get one:
 
    git clone [email protected]:sysadmin/l10n-scripty.git
 
You can then go to your project dir and run:
 
    mkdir po
    mkdir enpo # only needed if $EXTRACT_TR_STRINGS is used in any Messages.sh file
    PATH=/path/to/scripts:$PATH bash /path/to/scripts/extract-messages.sh
 
When it is done, the po/ dir should contain the generated .pot files.
 
=== Translating .desktop Files ===
You don't need to do anything to get the common fields (See [[#What's happening behind the scenes]] for a list) of .desktop or .desktop.cmake files translated.
 
If you have a file with the same syntax than a .desktop file but it has a different extension, you have to create an {{path|ExtraDesktop.sh}} file that outputs the path of those files
<syntaxhighlight lang="bash">
#! /bin/sh
find -name *desktop.in -print
</syntaxhighlight>
 
=== Translating .json files ===
 
You don't need to do anything to get the common fields (Name, Description, Copyright, ExtraInformation, Authors) for your .json files that belong to a KPlugin.
 
If you want to have extra fields (inside the KPlugin JSON object) from those .json files translated you can create a file named extraJsonTranslationKeys.txt in the top-level folder of the repository and write the keys of those fields in separate lines.
 
=== Translating Mimetype descriptions ===
Add a file named <code>XmlMessages.sh</code> to the folder with your mimetype XML  foo.xml with this content:
<syntaxhighlight lang="bash">
function get_files
{
    echo foo.xml
}
function po_for_file
{
    case "$1" in
      foo.xml)
          echo foo_xml_mimetypes.po
      ;;
    esac
}
function tags_for_file
{
    case "$1" in
      foo.xml)
          echo comment
      ;;
    esac
}
</syntaxhighlight>


=== What's happening behind the scenes ===
=== What's happening behind the scenes ===


{{tip|If your application is in the KDE code repository, all this happens automatically. If your code is not in the KDE repository, you must perform these steps yourself. See [[#handling i18n in third party applications]].}}
{{tip|If your application is in the KDE code repository, all this happens automatically. If your code is not in the KDE repository, you must perform these steps yourself. See [[#Handling i18n outside KDE's repositories]].}}


Periodically, the script {{path|extract-messages.sh}} (a.k.a. scripty) runs on the KDE server. This program basically calls all Messages.sh scripts in the repository with the appropriate parameters. The extracted messages are stored in template (.pot) files in the templates folder of the l10n module. See [[What Is Scripty]] for more information.  
Periodically, the script {{path|extract-messages.sh}} (a.k.a. scripty) runs on the KDE server. This program basically calls all Messages.sh scripts in the repository with the appropriate parameters. The extracted messages are stored in template (.pot) files in the templates folder of the l10n module. See [[What Is Scripty]] for more information.  


The KDE translation teams translate the messages and commit them into a messages folder corresponding to the language, which is further broken down by module. For example, German translated messages for konqueror are committed to {{path|l10n/de/messages/kdebase/konqueror.po}}.  
The KDE translation teams translate the messages and commit them into a messages folder corresponding to the language, which is further broken down by module. For example, German translated messages for konqueror are committed to {{path|l10n/de/messages/applications/konqueror.po}}.  


When the l10n module is built, the .po files are compiled into a binary format for fast lookup and installed as .mo files to {{path|$KDEDIR/share/locale/xx/LC_MESSAGES/}}, where xx is the two-letter ISO 639 code for the language. These are called the message catalogs.  
When the l10n module is built, the .po files are compiled into a binary format for fast lookup and installed as .mo files to {{path|$DATAROOTDIR/locale/xx/LC_MESSAGES/}}, where xx is the two-letter ISO 639 code for the language. These are called the message catalogs.  


At runtime, the <tt>i18n(...)</tt> function, using the original string you coded, looks up the string in the message catalog of the user's desktop language and returns the translated string. If the message catalog is missing, or the specific string is not found, <tt>i18n(...)</tt> falls back to the original string in your code.  
At runtime, the <tt>i18n(...)</tt> function, using the original string you coded, looks up the string in the message catalog of the user's desktop language and returns the translated string. If the message catalog is missing, or the specific string is not found, <tt>i18n(...)</tt> falls back to the original string in your code.  
Line 117: Line 172:
</syntaxhighlight>
</syntaxhighlight>


=== Testing your Messages.sh script ===
== KI18n==
KI18n is the framework most used in applications made by KDE (you can also use the Qt translation system though it's not recommented, see [[#Qt5-only: Code using Qt translation system]]


To test your Messages.sh script, you need a checkout of [http://websvn.kde.org/trunk/l10n-kde4/scripts/ the l10n scripts]. To get one:
It has a very comprehensive documentation that you can read at [https://api.kde.org/frameworks/ki18n/html/prg_guide.html https://api.kde.org/frameworks/ki18n/html/prg_guide.html]


    svn checkout svn://anonsvn.kde.org/home/kde/trunk/l10n-kde4/scripts
== Special cases (plugins, multiple catalogs, etc.) ==


You can then go to your project dir and run:
==== Declarative plasmoids ====
For plasmoids written in pure qml, the .pot file must be named the same as its plugin name (with '''plasma_applet_''' prefix), specified in its desktop file as '''X-KDE-PluginInfo-Name'''. For instance if we have '''X-KDE-PluginInfo-Name=org.kde.active.activityscreen''' the .pot file will be called '''plasma_applet_org.kde.active.activityscreen.pot'''.


    mkdir po
If the qml files are developed in the form of package instead of an autonomous plasmoid (for instance a package loaded by a C++ plasmoid) the .pot file will have the prefix '''plasma_package_''' instead.
    PATH=/path/to/l10n-kde4/scripts:$PATH bash /path/to/l10n-kde4/scripts/extract-messages.sh


When it is done, the po/ dir should contain the generated .pot files.
==== Akonadi Agents ====
 
Akonadi agents get the catalog loaded based on the name of the binary, so your .pot file should be named the same way your binary adding .pot at the end
== handling i18n in third party applications ==
You can check that in AgentBase::parseArguments in kdepimlibs
 
If your application is developed outside of KDE's subversion repository, you need to take care of generating and installing message catalogs yourself. This is not too hard to do, but you should make sure you have a basic understanding of all steps involved, so you will probably want to read [[#Theory: The xgettext toolchain]], first.
 
Also, there is more than one way to deal with i18n in your application. We will outline one approach to do so for simple applications, but you may want to diverge from this, if you like to.


=== General considerations ===
==== Qt5-only: Code using Qt translation system ====
Some Qt5-based applications and libraries use the Qt translation system instead of KI18n. Examples of such code are:


The i18n generation process can roughly be divided into two steps:
* Tier 1 KF5 frameworks because they cannot depend on KI18n.
* Applications which provide a Qt-only version.


# Extracting and merging messages
To make translators aware of this distinction, your .pot file should follow these naming schemes:
# Compiling and installing message catalogs


The first step really concerns the ''sources'', while the second step is a natural part of compiling and installing an application. Hence, while the second step should definitely be incorporated into the build system for your application (we assume CMake, here), there is no striking reason for the first step to be handled by the build system.
* '''*.po''': code using gettext with KDE translation extensions. .po files are compiled into .mo files (most common case).
* '''*_qt.po''': code using Qt translation system. The .po files are compiled into .qm files (some KF5 frameworks, applications providing a Qt-only version).
* '''*_qt-mo.po''': code using pure gettext. The .po files are compiled into .mo files (legacy).


In fact, the extraction and merging of messages does not map well onto the CMake concept of out-of-source builds, and CMake can't provide too much help for this step, either.


Hence, in this tutorial, we will handle the first step with a standalone shell script, and only the second step will be handled by CMake.
If you are using the Qt translation system you have to make sure the translations are loaded properly in your application at runtime. For that you can use [https://api.kde.org/ecm/module/ECMPoQmTools.html ECMPoQmTools] by adding this to your CMakeLists.txt:
 
=== Extracting and merging messages ===
 
If you have read the section [[#handling i18n in KDE's subversion repository]] you will know that in the KDE repository, message extraction and merging is handled by a simple script called Messages.sh, which is invoked by a script called {{path|extract-messages.sh}}. Outside of KDE's repository, you will need to take care of both parts, but fortunately, this is easy enough. Here's a sample script:
 
<syntaxhighlight lang="bash">
#!/bin/sh
BASEDIR="../rkward/" # root of translatable sources
PROJECT="rkward" # project name
BUGADDR="http://sourceforge.net/tracker/?group_id=50231&atid=459007" # MSGID-Bugs
WDIR=`pwd` # working dir
 
 
echo "Preparing rc files"
cd ${BASEDIR}
# we use simple sorting to make sure the lines do not jump around too much from system to system
find . -name '*.rc' -o -name '*.ui' -o -name '*.kcfg' | sort > ${WDIR}/rcfiles.list
xargs --arg-file=${WDIR}/rcfiles.list extractrc > ${WDIR}/rc.cpp
# additional string for KAboutData
echo 'i18nc("NAME OF TRANSLATORS","Your names");' >> ${WDIR}/rc.cpp
echo 'i18nc("EMAIL OF TRANSLATORS","Your emails");' >> ${WDIR}/rc.cpp
cd ${WDIR}
echo "Done preparing rc files"
 
 
echo "Extracting messages"
cd ${BASEDIR}
# see above on sorting
find . -name '*.cpp' -o -name '*.h' -o -name '*.c' | sort > ${WDIR}/infiles.list
echo "rc.cpp" >> ${WDIR}/infiles.list
cd ${WDIR}
xgettext --from-code=UTF-8 -C -kde -ci18n -ki18n:1 -ki18nc:1c,2 -ki18np:1,2 -ki18ncp:1c,2,3 -ktr2i18n:1 \
-kI18N_NOOP:1 -kI18N_NOOP2:1c,2 -kaliasLocale -kki18n:1 -kki18nc:1c,2 -kki18np:1,2 -kki18ncp:1c,2,3 \
--msgid-bugs-address="${BUGADDR}" \
--files-from=infiles.list -D ${BASEDIR} -D ${WDIR} -o ${PROJECT}.pot || { echo "error while calling xgettext. aborting."; exit 1; }
echo "Done extracting messages"
 
 
echo "Merging translations"
catalogs=`find . -name '*.po'`
for cat in $catalogs; do
  echo $cat
  msgmerge -o $cat.new $cat ${PROJECT}.pot
  mv $cat.new $cat
done
echo "Done merging translations"
 
 
echo "Cleaning up"
cd ${WDIR}
rm rcfiles.list
rm infiles.list
rm rc.cpp
echo "Done"
</syntaxhighlight>
 
Of course you will want to adjust the variable definitions at the top, and -- if needed -- add code to extract tips-of-the-day or other additional strings.
 
The example script assumes that all .po files and the .pot file are kept in a single directory, which is appropriate for most projects.
 
=== Compiling and installing message catalogs ===
 
Assuming you use the script from the previous section, you can place the following CMakeLists.txt in the directory containing the .po files:


<pre>
<pre>
FIND_PROGRAM(GETTEXT_MSGFMT_EXECUTABLE msgfmt)
include(ECMPoQmTools)
 
IF(NOT GETTEXT_MSGFMT_EXECUTABLE)
MESSAGE(
"------
                NOTE: msgfmt not found. Translations will *not* be installed
------")
ELSE(NOT GETTEXT_MSGFMT_EXECUTABLE)
 
        SET(catalogname rkward)
 
        ADD_CUSTOM_TARGET(translations ALL)
 
        FILE(GLOB PO_FILES *.po)
 
        FOREACH(_poFile ${PO_FILES})
                GET_FILENAME_COMPONENT(_poFileName ${_poFile} NAME)
                STRING(REGEX REPLACE "^${catalogname}_?" "" _langCode ${_poFileName} )
                STRING(REGEX REPLACE "\\.po$" "" _langCode ${_langCode} )
 
                IF( _langCode )
                        GET_FILENAME_COMPONENT(_lang ${_poFile} NAME_WE)
                        SET(_gmoFile ${CMAKE_CURRENT_BINARY_DIR}/${_lang}.gmo)
 
                        ADD_CUSTOM_COMMAND(TARGET translations
                                COMMAND ${GETTEXT_MSGFMT_EXECUTABLE} --check -o ${_gmoFile} ${_poFile}
                                DEPENDS ${_poFile})
                        INSTALL(FILES ${_gmoFile} DESTINATION ${LOCALE_INSTALL_DIR}/${_langCode}/LC_MESSAGES/ RENAME ${catalogname}.mo)
                ENDIF( _langCode )


        ENDFOREACH(_poFile ${PO_FILES})
ecm_create_qm_loader(mybinaryname_QM_LOADER mypotfilename_qt)


ENDIF(NOT GETTEXT_MSGFMT_EXECUTABLE)
set(my_project_SRCS
    ...
    ${mybinaryname_QM_LOADER})
</pre>
</pre>


This iterates over all .po files in the directory, compiles them using msgfmt, and installs them to the standard location. You will want to change "catalogname" to the name of your application.
== Handbooks ==


=== Getting translations ===
Handbooks, which are written in docbook format, are handled different from applications. The translated Handbooks are committed into the l10n module in the docs folder under each language. In addition, the docs folder is broken down by module and application. For example, the German Kate Handbook is committed to the {{path|l10n-kf5/de/docs/applications/kate/}} folder. When compiled, the German Kate Handbook is installed to {{path|$DATAROOTDIR/doc/HTML/de/kate/index.cache.bz2}}.


Now you just have to find translators to translate the extracted messages into the various languages. As your application gets used by more people, you will find that translators will volunteer to do this. Translated PO files then have to be stored in the po folder with the naming scheme <languagecode>.po.
Note that it is up to each translation team to generate the translated Handbook when they feel it is complete.
 
=== Translating .desktop Files ===
 
Translating .desktop files is a bit tricky because the translation of .desktop files isn't fetched from .po/.gmo files, but must be part of the .desktop file itself. So we have 2 tasks:
 
* extract messages from the .desktop file
* merge the translations in the .desktop file
 
Our friends from Gnome provide the [http://freedesktop.org/wiki/Software/intltool intltool] package. While this tools is mainly written for the old autotools build system (but KDE uses CMake since KDE 4), we can use this package nevertheless for our purpose. Here is a step-by-step guide:
 
# Install the [http://freedesktop.org/wiki/Software/intltool intltool] package
# We assume that your .desktop file is named "MYPROGRAM.desktop".
# Make a copy of "MYPROGRAM.desktop" which is named "MYPROGRAM.desktop.template".
# In MYPROGRAM.desktop.template substitute the keys "Name" by "_Name", "GenericName" by "_GenericName" and "Comment" by "_Comment".
# Remove all translations from "MYPROGRAM.desktop.template".
# Add the following lines to the above described build script, at the end of the section "Preparing rc files":
<syntaxhighlight lang="bash">
intltool-extract --quiet --type=gettext/ini PATH/MYPROGRAM.desktop.template
cat PATH/MYPROGRAM.desktop.template.h >> ${WDIR}/rc.cpp
rm PATH/MYPROGRAM.desktop.template.h
cd ${WDIR}
</syntaxhighlight>
intltool-extract will create a dummy C++ header (PATH/MYPROGRAM.desktop.template.h) with the strings whose key starts with "_". We append the content of this header file into our "rc.cpp" and remove remove the file than. (We assume that "PATH" is the path to "MYPROGRAM.desktop.template", relative to the working directory of the script.)
# Add "-kN_:1" as additional parameter to the xgettext call in the section "Extracting messages". This is necessary because dummy code that intltool-extract produces uses "N_()" instead of "i18n()".
# Add the following lines to the above described build script, at the end of the section "Merging translations":
<syntaxhighlight lang="bash">
cd ${WDIR}
intltool-merge --quiet --desktop-style ${WDIR} PATH/MYPROGRAM.desktop.template PATH2/MYPROGRAM.desktop
</syntaxhighlight>
This will produce MYPROGRAM.desktop from MYPROGRAM.desktop.template, inserting all available translations in the .po files in the directory ${WDIR}. (We assume that "PATH" is the path to "MYPROGRAM.desktop.template", relative to the working directory of the script. We assume that "PATH2" is the path to the final location of "MYPROGRAM.desktop", relative to the working directory of the script.)
 
{{note|Names of .po files):For intltool, it is ''required'' that the .po files have the name <languagecode>.po without other characters (NOT programname_<languagecode>.po). This is important because intltool-merge simply uses the .po file name (without ".po") as language key in the .desktop file.}}
 
== Special cases (plugins, multiple catalogs, etc.) ==
 
=== Runtime Loading Of Catalogs ===
 
To have translations show up properly in an application, the name of the .pot file must match the name of the message catalog (.mo) file that your application will read at runtime. But what name will be used at runtime?
 
In general, it will be the value returned by <tt>{{class|KGlobal}}::instance()->instanceName()</tt>. But what will that be? The general rules for standalone applications are:
* the message catalog will default to the name of the application passed as the first argument to {{class|KAboutData}}
* if your code calls <tt>{{class|KLocale}}::setMainCatalog()</tt>, that name will be used instead
* if your code calls <tt>{{class|KLocale}}::insertCatalog(const QString&)</tt>, the specified catalog will also be searched in addition to the main catalog
 
If your code does not call either of the {{class|KLocale}} methods mentioned above and your application is a plugin, it gets a little more complicated. If your code exports your plugin using the <tt>K_EXPORT_COMPONENT_FACTORY</tt> macro, like this:
 
<syntaxhighlight lang="cpp-qt">
K_EXPORT_COMPONENT_FACTORY( libkhtmlkttsdplugin, KGenericFactory<KHTMLPluginKTTSD>("khtmlkttsd") )
</syntaxhighlight>
 
then the catalog name will be the name passed in the {{class|KGenericFactory}} constructor - in the example above that woudl be <tt>khtmlkttsd</tt>. This is because the macro creates a {{class|Kinstance}} for you with the specified name.
 
However, some classes, such as <tt>KTextEditor</tt> create a <tt>KPart</tt> containing your component and the name passed in the macro is not used. In this case, you should call <tt>{{class|KLocale}}::insertCatalog(const QString&)</tt> in the component's constructor.
 
If in doubt, the safest thing to do is to call <tt>{{class|KLocale}}::insertCatalog(const QString&)</tt>.
 
{{tip|If you are not using the export macro for your plugin, you probably should be. See the API documentation of KGenericFactory for more information.}}
 
Calling <tt>{{class|KLocale}}::insertCatalog(const QString&)</tt> if the catalog has already been inserted does nothing. However, calling <tt>{{class|KLocale}}::removeCatalog(const QString&)</tt> removes the catalog no matter how many times it has been inserted. Therefore, take care that you do not inadvertently remove the catalog when multiple components are sharing a single catalog. For example, the following sequence will break translations:
 
<syntaxhighlight lang="cpp-qt">
// Component A loads and uses catalog xyz by calling
insertCatalogue("xyz");
// Component B loads and also uses the same catalog.
insertCatalogue("xyz");
// component B unloads and calls
removeCatalogue("xyz")
// Component A now doesn't translate properly.
</syntaxhighlight>


Notice that a sequence such as above will occur automatically if both components A and B are loaded using the <tt>K_EXPORT_COMPONENT_FACTORY</tt> macro and pass the same name argument to the KGenericFactory constructor.
== Handling i18n outside KDE's repositories ==


=== Naming .pot Files ===
There's a whole page dedicated to that in [[/Outside_KDE_repositories]]
 
The name that you settle on for both the .pot file and catalog should be governed by where your code resides. If it is a component of another application and resides in that application's source tree, you'll want to share the main catalog of the application.
 
If is a component of another application but resides elsewhere in the code repository, you will probably have to create a separate .pot, but keep in mind that .pot filenames must be unique across all of KDE.
 
If it is a component of another application, but resides in the source tree of a second application, you should share with the second application. For example, the KDE text-to-speach daemon (KTTSD) includes a plugin for embedded Kate in {{path|kdeaccessibility/kttsd}} source tree. Since the plugin is not installed unless kttsd is installed, it shares its catalog with kttsd and calls <tt>{{class|KLocale}}::insertCatalog("kttsd")</tt> to do this.
 
==== Declarative plasmoids ====
For plasmoids written in pure qml, the .pot file must be named the same as its plugin name (with '''plasma_applet_''' prefix), specified in its desktop file as '''X-KDE-PluginInfo-Name'''. For instance if we have '''X-KDE-PluginInfo-Name=org.kde.active.activityscreen''' the .pot file will be called '''plasma_applet_org.kde.active.activityscreen.pot'''. The KLocale::insertCatalog() call is performed by the declarative scriptengine itself, so the developer of the qml plasmoid doesn't have to worry about that.
 
If the qml files are developed in the form of package instead of an autonomous plasmoid (for instance a package loaded by a C++ plasmoid) the .pot file will have the prefix '''plasma_package_''' instead.
 
==== Akonadi Agents ====
Akonadi agents get the catalog loaded based on the name of the binary, so your .pot file should be named the same way your binary adding .pot at the end
You can check that in AgentBase::parseArguments in kdepimlibs
 
== Handbooks ==
 
Handbooks, which are written in docbook format, are handled different from applications. The translated Handbooks are committed into the l10n module in the docs folder under each language. In addition, the docs folder is broken down by module and application. For example, the German Kate Handbook is committed to the {{path|l10n-kde4/de/docs/kde-baseapps/kate/}} folder. When compiled, the German Kate Handbook is installed to {{path|$KDEDIR/share/doc/HTML/de/kate/index.cache.bz2}}.
 
Note that it is up to each translation team to generate the translated Handbook when they feel it is complete.


[[Category:Programming]]
[[Category:Programming]]

Latest revision as of 15:49, 18 January 2022

Building KDE's l10n Module
Tutorial Series   Localization
Previous   Writing Applications With Localization in Mind
What's Next   Dealing with language changes
Further Reading   n/a

Abstract

Now that your application is ready to be localized, we next look at how to incorporate the necessary mechanisms into the CMake build system of your application.

First we'll explain the "theory" of the steps that need to happen from extracting message strings to installing the generated .po files. After that we'll look at how to implement those steps (#Theory: The xgettext toolchain). If your application is developed in KDE's repositories, many of those steps will happen automatically (see #Handling i18n in KDE's repositories). Else you will want to read on in the #Handling i18n outside KDE's repositories section.

Theory: The xgettext toolchain

Making translations work consists of the following steps:

  1. Extract the translatable strings
  2. Merge the new or changed strings with existing translations
  3. Compile the translations into message catalogs
  4. Install the message catalogs
  5. Use the message catalogs in the application

Extracting the strings

In this step, all the strings you marked as i18n()/ki18n()/etc. in your sources need to be collected into a translation template (.pot) file. Some translateable strings are also contained in .ui, .rc, or .kcfg files. Also tips-of-the-day need to be collected into the .pot file.

These steps are handled by xgettext, extractrc, and preparetips programs, respectively. In some cases you may also need extractattr.

Merging translations

Generally, only a few translatable string will change at a time, in an application. Some will be removed, some will be added, some will be changed into different strings, and some will be moved around in the source files. These changes need to be reflected in the translations, but of course it would be a huge effort to redo the entire translation every time a string was changed. Rather the changes should be merged with the existing translations. This is the job of the msgmerge tool.

Compiling the translations

In order to make message lookup fast, the .po files need to be compiled into so-called "message catalogs" (.mo / .gmo). This is done using the msgfmt tool.

Installing the message catalogs

The compiled message catalogs need to be installed alongside the application. In KDE, the standard location for message catalogs is $DATAROOTDIR/locale/xx/LC_MESSAGES/.

Using the message catalogs

Finally, when the application is run, it needs to load the appropriate message catalog in order to be able to look up and show translated strings. In KDE applications, this is the job of the KLocale class, and in the great majority of cases happens automatically.

For some special cases, such as plugins, look at #Runtime Loading Of Catalogs.

Handling i18n in KDE's repositories

If your application is developed inside KDE's repositories, most of the steps outlined above are automated. In this case, generally, all you will need to do is provide a simple script called Messages.sh, which we will look at below.

Of course, for the curious, a more detailed account of what happens behind the scenes is also provided.

Writing a Messages.sh script

Basically, the only thing that is necessary to prepare and install translations for applications in KDE's repositories, is to provide information, which sources, ui-files or tips need to be translated. For this purpose, you write a small script called Messages.sh and place it in your sources. Here is an example with inline comments:

#!/bin/sh

# invoke the extractrc script on all .ui, .rc, and .kcfg files in the sources
# the results are stored in a pseudo .cpp file to be picked up by xgettext.
$EXTRACTRC `find . -name \*.rc -o -name \*.ui -o -name \*.kcfg` >> rc.cpp
# invoke the grantlee extract script for translatable string from Grantlee themes
$EXTRACT_GRANTLEE_TEMPLATE_STRINGS `find . -name \*.html` >> html.cpp
# if your application contains tips-of-the-day, call preparetips as well.
$PREPARETIPS > tips.cpp
# call xgettext on all source files. If your sources have other filename
# extensions besides .cc, .cpp, and .h, just add them in the find call.
$XGETTEXT `find . -name \*.cc -o -name \*.cpp -o -name \*.h -name \*.qml` -o $podir/APPNAME.pot

As you can see, this script contains only four actual lines of code, and not all may even be needed. The $XGETTEXT, $PREPARETIPS, $EXTRACTRC, $EXTRACT_GRANTLEE_TEMPLATE_STRINGS and $podir environment variables are predefined, you do not need to worry about setting these. The only thing that you will need to do is to replace "APPNAME" with the name of your application (but see #Naming .pot Files for exceptions).

  • $XGETTEXT - Extract i18n translatable strings from C++ files
  • $EXTRACT_TR_STRINGS - Extract Qt tr translatable strings from C++ files for Qt5-based projects
  • $EXTRACTRC - Extract translatable strings from xml configuration and ui files.
  • $EXTRACT_GRANTLEE_TEMPLATE_STRINGS - Extract translatable strings from Grantlee template files.

Try to make sure your Messages.sh script collects only those messages that are really needed. If in doubt, look at other Messages.sh files in the KDE repositories for inspiration, or -- of course -- ask.

Testing your Messages.sh script

To test your Messages.sh script, you need a checkout of the l10n scripts. To get one:

   git clone [email protected]:sysadmin/l10n-scripty.git

You can then go to your project dir and run:

   mkdir po
   mkdir enpo # only needed if $EXTRACT_TR_STRINGS is used in any Messages.sh file
   PATH=/path/to/scripts:$PATH bash /path/to/scripts/extract-messages.sh

When it is done, the po/ dir should contain the generated .pot files.

Translating .desktop Files

You don't need to do anything to get the common fields (See #What's happening behind the scenes for a list) of .desktop or .desktop.cmake files translated.

If you have a file with the same syntax than a .desktop file but it has a different extension, you have to create an ExtraDesktop.sh file that outputs the path of those files

#! /bin/sh
find -name *desktop.in -print

Translating .json files

You don't need to do anything to get the common fields (Name, Description, Copyright, ExtraInformation, Authors) for your .json files that belong to a KPlugin.

If you want to have extra fields (inside the KPlugin JSON object) from those .json files translated you can create a file named extraJsonTranslationKeys.txt in the top-level folder of the repository and write the keys of those fields in separate lines.

Translating Mimetype descriptions

Add a file named XmlMessages.sh to the folder with your mimetype XML foo.xml with this content:

function get_files
{
    echo foo.xml
}
function po_for_file
{
    case "$1" in
       foo.xml)
           echo foo_xml_mimetypes.po
       ;;
    esac
}
function tags_for_file
{
    case "$1" in
      foo.xml)
           echo comment
       ;;
    esac
}

What's happening behind the scenes

Tip
If your application is in the KDE code repository, all this happens automatically. If your code is not in the KDE repository, you must perform these steps yourself. See #Handling i18n outside KDE's repositories.


Periodically, the script extract-messages.sh (a.k.a. scripty) runs on the KDE server. This program basically calls all Messages.sh scripts in the repository with the appropriate parameters. The extracted messages are stored in template (.pot) files in the templates folder of the l10n module. See What Is Scripty for more information.

The KDE translation teams translate the messages and commit them into a messages folder corresponding to the language, which is further broken down by module. For example, German translated messages for konqueror are committed to l10n/de/messages/applications/konqueror.po.

When the l10n module is built, the .po files are compiled into a binary format for fast lookup and installed as .mo files to $DATAROOTDIR/locale/xx/LC_MESSAGES/, where xx is the two-letter ISO 639 code for the language. These are called the message catalogs.

At runtime, the i18n(...) function, using the original string you coded, looks up the string in the message catalog of the user's desktop language and returns the translated string. If the message catalog is missing, or the specific string is not found, i18n(...) falls back to the original string in your code.

.desktop files in your project are handled separately. makemessages extracts strings, such as Name and Comment from the .desktop files and places them into a file named desktop_mmmm.pot, where mmmm is the module name, in the templates folder. Once translators have translated this file, makemessages inserts the translated strings back into the .desktop files. The list of strings extracted is in l10n/scripts/apply.cc. Here's the code that checks for them:

if (checkTag("Name", in, argc, argv, newFile))
    continue;
if (checkTag("Comment", in, argc, argv, newFile))
    continue;
if (checkTag("Language", in, argc, argv, newFile))
    continue;
if (checkTag("Keywords", in, argc, argv, newFile))
    continue;
if (checkTag("About", in, argc, argv, newFile))
    continue;
if (checkTag("Description", in, argc, argv, newFile))
    continue;
if (checkTag("GenericName", in, argc, argv, newFile))
    continue;
if (checkTag("Query", in, argc, argv, newFile))
    continue;
if (checkTag("ExtraNames", in, argc, argv, newFile))
    continue;

KI18n

KI18n is the framework most used in applications made by KDE (you can also use the Qt translation system though it's not recommented, see #Qt5-only: Code using Qt translation system

It has a very comprehensive documentation that you can read at https://api.kde.org/frameworks/ki18n/html/prg_guide.html

Special cases (plugins, multiple catalogs, etc.)

Declarative plasmoids

For plasmoids written in pure qml, the .pot file must be named the same as its plugin name (with plasma_applet_ prefix), specified in its desktop file as X-KDE-PluginInfo-Name. For instance if we have X-KDE-PluginInfo-Name=org.kde.active.activityscreen the .pot file will be called plasma_applet_org.kde.active.activityscreen.pot.

If the qml files are developed in the form of package instead of an autonomous plasmoid (for instance a package loaded by a C++ plasmoid) the .pot file will have the prefix plasma_package_ instead.

Akonadi Agents

Akonadi agents get the catalog loaded based on the name of the binary, so your .pot file should be named the same way your binary adding .pot at the end You can check that in AgentBase::parseArguments in kdepimlibs

Qt5-only: Code using Qt translation system

Some Qt5-based applications and libraries use the Qt translation system instead of KI18n. Examples of such code are:

  • Tier 1 KF5 frameworks because they cannot depend on KI18n.
  • Applications which provide a Qt-only version.

To make translators aware of this distinction, your .pot file should follow these naming schemes:

  • *.po: code using gettext with KDE translation extensions. .po files are compiled into .mo files (most common case).
  • *_qt.po: code using Qt translation system. The .po files are compiled into .qm files (some KF5 frameworks, applications providing a Qt-only version).
  • *_qt-mo.po: code using pure gettext. The .po files are compiled into .mo files (legacy).


If you are using the Qt translation system you have to make sure the translations are loaded properly in your application at runtime. For that you can use ECMPoQmTools by adding this to your CMakeLists.txt:

include(ECMPoQmTools)

ecm_create_qm_loader(mybinaryname_QM_LOADER mypotfilename_qt)

set(my_project_SRCS
    ...
    ${mybinaryname_QM_LOADER})

Handbooks

Handbooks, which are written in docbook format, are handled different from applications. The translated Handbooks are committed into the l10n module in the docs folder under each language. In addition, the docs folder is broken down by module and application. For example, the German Kate Handbook is committed to the l10n-kf5/de/docs/applications/kate/ folder. When compiled, the German Kate Handbook is installed to $DATAROOTDIR/doc/HTML/de/kate/index.cache.bz2.

Note that it is up to each translation team to generate the translated Handbook when they feel it is complete.

Handling i18n outside KDE's repositories

There's a whole page dedicated to that in /Outside_KDE_repositories