Difference between revisions of "Development/Tutorials/KAuth/KAuth Basics"

Revision as of 13:03, 12 February 2010

KAuth Basics

Tutorial Series	KAuth Tutorial
Previous
What's Next	Using KAuth actions in your application
Further Reading	None

What is KAuth

KAuth (part of kdelibs/kdecore) is an authentication framework for KDE. Just like any other components in the KDE Development Platform, it is a wrapper around lower-level tools. If you're planning to use KAuth, however, you won't have to care about what authentication system is the system you're targeting using: KAuth will take care of that on its own.

In addition, KAuth is also able to perform privilege elevation on restricted portions of code (helpers), giving the developer an efficient and easy to use pipe to communicate with them, and making them secure throughout authorization.

Concepts

There are a few concepts to understand when using KAuth. Much of those are carried from underlying APIs such as polkit, so if you are familiar with one of them you might as well skip this section.

Terms and main concepts

The authorization system is an underlying framework (like polkit or Authorization Services), which KAuth interfaces with. KAuth's aim is to never make the developer know or care about the underlying auhtorization system, however in this tutorial series this concept will come up quite often to explain better how KAuth works.
An action is a single task that needs authorization to be performed. Each action has an unique action identifier, which is a string in reverse domain name syntax, like org.kde.this.is.an.action. For example, if our example application needs to read a file the user has no privileges on, it would need an action like "org.kde.auth.example.read". Please note that each action has to refer to a single task: this allows system administrators to fine tune the policies that allow users to perform your actions, and also a more secure way of locking down the privileged actions in your application.
An action namespace is the first part of the action identifier. In "org.kde.auth.example.read", org.kde.auth.example is the action namespace, read is the action name. This is a very important concept when dealing with helpers and .actions files.
Authorization is a particular phase where the underlying authorization system performs the needed checks (and eventually asks the user its credentials in order to authorize him). Before any action is executed, the Authorization phase takes place. This is handled internally by KAuth: even if you are able to trigger this phase manually, most of the times you don't need to: KAuth will still execute an action only if the underlying authorization system allows its execution.
Authentication is an optional phase that takes place during authorization, if the policy for the action requests the user to input a credential to give him an explicit authorization. This phase is external and not handled by KAuth, but entirely by the underlying authorization system. It is, however, important for you to know something about it even if KAuth has no way to hijack the Authentication phase by design.
Execution happens only if the Authorization was successful: the execution might consist in a simple confirmation of the successful authorization, or eventually in the execution of a function in an helper.
An Helper is a separate application running as a privileged user (usually root), which is called upon execution if your action was attached to an helper. KAuth uses a completely transparent approach: IPC between your application and the helper itself is handled internally through an extremely simple API, and you won't even know that the helper is a separate application: spawning, killing and all the process handling is handled by KAuth.

Phases breakdown

Supposing that you want to use KAuth to perform a privileged operation and the action you are considering requires the user to authenticate (which is the most common use case of KAuth), the break down of phases would be:

The user wants to perform some privileged task
The application creates an action for the task in question.
The action is requested to be executed.
The following steps are handed internally, either by KAuth or the underlying authorization system.
Authorization phase begins
The system detects that the user needs to authenticate to authorize the action.
Authentication phase begins
The user is requested to input his password, swipe his finger, press a button...
Authentication phase ends
If authentication was unsuccessful, the action is rejected.
Otherwise, the system grants an explicit authorization to the user
Authorization phase ends
If authorization was unsuccessful, the action is rejected
Otherwise, the action is executed
Execution phase begins
A separate application is spawned by root, and the requested portion of code is executed.
The helper code, immediately after starting, checks the authorization again to improve security, and also because some authorization systems delay the authorization phase in the beginning of the execution phase. If the helper is not authorized, the execution is aborted.
If the caller is authorized, the helper executes the task
Execution phase ends
The application receives the result of the execution from the helper

This is how, concept-proof, KAuth works. However, please note that in your implementation you will have to deal with the pre-authorization phase only, since everything else is handled internally.

Creating Actions with KAuth

To increase the level of security, authorization systems require to register the actions together with the application installation, so that the authorized actions are all known to the system administrator. This means that if you're using KAuth you probably want to register some new actions in the system.

The basic .actions file

This is done by creating a .actions file, which is a standard INI files containing a set of new actions. This file is translatable, and if you're developing your project in KDE SVN, scripty will take care of updating it.

Each .actions file can contain an unlimited set of actions, provided that they belong to the same action namespace. This is extremely important.

The file has the following format:

[org.kde.auth.example.action]
Name=Example action
Description=The system is attempting to perform the example action
Policy=auth_admin
Persistence=session

The fields are defined as follows:

Title: The action identifier
Name: A human readable action name
Description: This message will eventually be displayed to the user during the authentication phase, if any.
Policy: The default policy for this action. It can be one of the following values:
- yes: the action should be allowed without requesting authentication
- no: the action should be always denied, without requesting authentication
- auth_self: the action will be authorized if the user will authenticate as himself
- auth_admin: the action will be authorized if the user will authenticate as a system administrator
Persistence: this field is optional and takes effect only if the authorization system supports it and Policy is either auth_admin or auth_self. It defines the persistence of the explicit authorization granted by the user through authentication. It can be one of the following values:
- session: the authorization persists until the user logs out
- always: the authorization will persist indefinitely

The Domain field

.actions files can have a special group, [Domain], under which you can give out some more information about the action namespace you're defining. This is how it looks (all fields are optional):

[Domain]
Name=The KAuth example series
Icon=kauth-example
URL=http://techbase.kde.org/

The fields are defined as follows:

Name: Usually the name defining the application which is going to use this namespace
Icon: An icon name, that will be shared among all the actions
URL: Home page of your organization

CMake macros and file format

Once you defined the actions in your file (remember you can define an unlimited number of actions in an .actions file, provided that they all belong to the same namespace, for example org.kde.auth.example.*), KAuth provides a CMake macro to register the actions in the system. From your CMakeLists.txt, supposing your file is named org.kde.auth.example.actions, you would do:

kde4_install_auth_actions(org.kde.auth.example org.kde.auth.example.actions)

This macro has the following syntax:

kde4_install_auth_actions(<namespace_id> <actions definition file>)

Where namespace_id is the namespace where you defined your actions, in this case org.kde.auth.example.

@@ Line 25: / Line 25: @@
 === Terms and main concepts ===
 *The ''authorization system'' is an underlying framework (like polkit or Authorization Services), which KAuth interfaces with. KAuth's aim is to never make the developer know or care about the underlying auhtorization system, however in this tutorial series this concept will come up quite often to explain better how KAuth works.
-*An ''action'' is a single task that needs authorization to be performed. Each action has an unique action identifier, which is a string in reverse domain name syntax, like ''org.kde.this.is.an.action''. For example, if the date/time control center module needs to change the date, it would need an action like "org.kde.datatime.change". Please note that each action has to refer to a single task: this allows system administrators to fine tune the policies that allow users to perform your actions, and also a more secure way of locking down the privileged actions in your application.
+*An ''action'' is a single task that needs authorization to be performed. Each action has an unique action identifier, which is a string in reverse domain name syntax, like ''org.kde.this.is.an.action''. For example, if our example application needs to read a file the user has no privileges on, it would need an action like "org.kde.auth.example.read". Please note that each action has to refer to a single task: this allows system administrators to fine tune the policies that allow users to perform your actions, and also a more secure way of locking down the privileged actions in your application.
-* An ''action namespace'' is the first part of the action identifier. In "org.kde.datatime.change", ''org.kde.datetime'' is the '''action namespace''', ''change'' is the '''action name'''. This is a very important concept when dealing with helpers and .actions files.
+* An ''action namespace'' is the first part of the action identifier. In "org.kde.auth.example.read", ''org.kde.auth.example'' is the '''action namespace''', ''read'' is the '''action name'''. This is a very important concept when dealing with helpers and .actions files.
-*''Authorization'' is a particular phase where the underlying authorization framework performs the needed checks (and eventually asks the user its credentials in order to authorize him). Before any action is executed, the Authorization phase takes place. This is handled internally by KAuth: even if you are able to trigger this phase manually, most of the times you don't need to: KAuth will still execute an action only if the underlying authorization framework allows its execution.
+*''Authorization'' is a particular phase where the underlying authorization system performs the needed checks (and eventually asks the user its credentials in order to authorize him). Before any action is executed, the Authorization phase takes place. This is handled internally by KAuth: even if you are able to trigger this phase manually, most of the times you don't need to: KAuth will still execute an action only if the underlying authorization system allows its execution.
-*''Authentication''&nbsp;is an optional phase that takes place during authorization, if the policy for the action requests the user to input a credential to give him an explicit authorization. This phase is external and not handled by KAuth, but entirely by the underlying authorization framework. It is, however, important for you to know something about it even if KAuth has no way to hijack the Authentication phase by design.
+*''Authentication''&nbsp;is an optional phase that takes place during authorization, if the policy for the action requests the user to input a credential to give him an explicit authorization. This phase is external and not handled by KAuth, but entirely by the underlying authorization system. It is, however, important for you to know something about it even if KAuth has no way to hijack the Authentication phase by design.
 *''Execution'' happens '''only''' if the Authorization was successful: the execution might consist in a simple confirmation of the successful authorization, or eventually in the execution of a function in an helper.
 *An&nbsp;''Helper ''is a separate application running as a privileged user (usually root), which is called upon execution if your action was attached to an helper. KAuth uses a completely transparent approach: IPC between your application and the helper itself is handled internally through an extremely simple API, and you won't even know that the helper is a separate application: spawning, killing and all the process handling is handled by KAuth.
@@ Line 83: / Line 83: @@
 **''no'': the action should be always denied, without requesting authentication
 **''auth_self'': the action will be authorized if the user will authenticate as himself
-**'auth_admin'': the action will be authorized if the user will authenticate as a system administrator
+**''auth_admin'': the action will be authorized if the user will authenticate as a system administrator
 *'''Persistence''': this field is optional and takes effect only if the authorization system supports it and '''Policy''' is either ''auth_admin'' or ''auth_self''. It defines the persistence of the explicit authorization granted by the user through authentication. It can be one of the following values:
 **''session'': the authorization persists until the user logs out