Difference between revisions of "Development/Languages/Ruby/Ruby-Qt/KDE Book/First Steps/Hello World"

Jump to: navigation, search
(changed code snippets)
(Grammar check of 1.1)
Line 11: Line 11:
 
* improve writing style and remove spelling mistakes|100%}}
 
* improve writing style and remove spelling mistakes|100%}}
  
After all you should have a working ruby installation with KDE 4 bindings.
+
You should now have a working ruby installation with KDE 4 bindings.
  
So lets try the a very minimalistic Qt 4 application to get a first impression. We don't start with KDE, because it would require some extra lines, that are not necessary when using Qt.
+
So let's try out a very minimalistic Qt 4 application to get a first impression. We don't start with KDE because that would require some extra lines which are not necessary when using Qt.
  
 
= Hello Ruby =
 
= Hello Ruby =
Line 20: Line 20:
  
 
Open a shell and type in <tt>irb</tt> to start the interactive ruby shell.
 
Open a shell and type in <tt>irb</tt> to start the interactive ruby shell.
Now copy the short code example into the irb session.
+
Now copy this short code example into the irb session.
  
 
<code ruby>
 
<code ruby>
Line 31: Line 31:
 
</code>
 
</code>
  
Before you starting you start programming your Graphical User Interface (GUI), you have to <<tt>require</tt> the libraries, in this case <tt>Qt4</tt>, but <tt>korundum4</tt> would also do the job, because the KDE libs automatically also requires the Qt libs for you.
+
Before you start programming your Graphical User Interface (GUI) you have to <<tt>require</tt> the libraries, in this case <tt>Qt4</tt>, but <tt>korundum4</tt> would also do the job because the KDE libs automatically requires the Qt libs for you.
  
In the second line we create a new Qt Object a of <tt>Qt::Application</tt>. <tt>Qt</tt> is the Ruby module (namespace) and <tt>Application</tt> the name of the class in the module. In C++, the native language of Qt, you would write <tt>QApplication</tt>. Remember this as you will need it, if you want to take a look in the Qt documentation.
+
In the second line we create a new Qt Object <tt>a</tt> of <tt>Qt::Application</tt>. <tt>Qt</tt> is the Ruby module (namespace) and <tt>Application</tt> the name of the class in the module. In C++, the native language of Qt, you would write <tt>QApplication</tt>. Remember this as you will need it when you want to take a look at the Qt documentation, which assumes you use C++.
  
Another object w of <tt>Qt::PushButton</tt> is created in the third line. <tt>"Hello Ruby"</tt> is the first (and only) argument of the Constructor. If you check the Qt documentation, you would find out, that this is the caption of the button. Ruby would also allow you to write it with brackets.
+
Another object <tt>w</tt> of <tt>Qt::PushButton</tt> is created in the third line. <tt>"Hello Ruby"</tt> is the first (and only) argument of the Constructor. If you check the Qt documentation, you would find out, that this is the caption of the button. Ruby would also allow you to write it with brackets.
  
 
<code ruby>
 
<code ruby>
Line 43: Line 43:
 
The small <tt>w</tt> means widget. All graphical elements in Qt are called widgets.
 
The small <tt>w</tt> means widget. All graphical elements in Qt are called widgets.
  
The fourth line is probably the most complicated one. The ruby class method <tt>connect</tt> of the object <tt>Object</tt> of the module <tt>Qt</tt> is used to bind the user action button-clicked with the action application-close. The signals and slots is a special concept of Qt. You can get a [http://en.wikipedia.org/wiki/Signals_and_slots short overview] and other ressources on Wikipedia.
+
The fourth line is probably the most complicated one. The ruby class method <tt>connect</tt> of the object <tt>Object</tt> of the module <tt>Qt</tt> is used to bind the user action button-clicked with the action application-close. Signals and slots is a special concept of Qt. You can get a [http://en.wikipedia.org/wiki/Signals_and_slots short overview], and find other resources, on Wikipedia.
  
 
The C++ equivalent you will find in the Qt documentation to <tt>:clicked</tt> would be <tt>"clicked()"</tt>, a signal without an argument. In the case of no arguments you can always use a ruby symbol.
 
The C++ equivalent you will find in the Qt documentation to <tt>:clicked</tt> would be <tt>"clicked()"</tt>, a signal without an argument. In the case of no arguments you can always use a ruby symbol.
  
The fifth line let the created widget show. Don't forget this line. Maybe you want to think of a starting point of your application.
+
The fifth line is required to make the created widget actually appear on the screen. Don't forget this line. Maybe you want to think of this as the starting point of your application.
  
At last the application gets started by <tt>a.exec</tt>. Now the GUI takes over and manages the control flow. Any other command after this line will be applied after the GUI was closed.
+
And finally the application gets started by <tt>a.exec</tt>. Now the GUI takes over and manages the control flow. Any other command after this line will be applied after the GUI was closed.
  
 
== Say Hello, Ruby ==
 
== Say Hello, Ruby ==

Revision as of 12:48, 3 February 2010

Ruby-Qt/KDE Book
Tutorial Series   Ruby
Previous   Installation on Linux, Installation on Mac OS or Installation on Windows
What's Next   n/a
Further Reading   Signals and Slots-Concept
100%
 
noframe

80% completed (estimate)

  

TODO:

  • improve writing style and remove spelling mistakes
Status Of Writing


You should now have a working ruby installation with KDE 4 bindings.

So let's try out a very minimalistic Qt 4 application to get a first impression. We don't start with KDE because that would require some extra lines which are not necessary when using Qt.

Contents

Hello Ruby

Interactive Implementation Using Qt 4

Open a shell and type in irb to start the interactive ruby shell. Now copy this short code example into the irb session.

require 'Qt4' a = Qt::Application.new ARGV w = Qt::PushButton.new "Hello Ruby" Qt::Object.connect( w, SIGNAL( :clicked ), a, SLOT( :quit ) ) w.show a.exec

Before you start programming your Graphical User Interface (GUI) you have to <require the libraries, in this case Qt4, but korundum4 would also do the job because the KDE libs automatically requires the Qt libs for you.

In the second line we create a new Qt Object a of Qt::Application. Qt is the Ruby module (namespace) and Application the name of the class in the module. In C++, the native language of Qt, you would write QApplication. Remember this as you will need it when you want to take a look at the Qt documentation, which assumes you use C++.

Another object w of Qt::PushButton is created in the third line. "Hello Ruby" is the first (and only) argument of the Constructor. If you check the Qt documentation, you would find out, that this is the caption of the button. Ruby would also allow you to write it with brackets.

w = Qt::PushButton.new( "Hello Ruby" )

The small w means widget. All graphical elements in Qt are called widgets.

The fourth line is probably the most complicated one. The ruby class method connect of the object Object of the module Qt is used to bind the user action button-clicked with the action application-close. Signals and slots is a special concept of Qt. You can get a short overview, and find other resources, on Wikipedia.

The C++ equivalent you will find in the Qt documentation to :clicked would be "clicked()", a signal without an argument. In the case of no arguments you can always use a ruby symbol.

The fifth line is required to make the created widget actually appear on the screen. Don't forget this line. Maybe you want to think of this as the starting point of your application.

And finally the application gets started by a.exec. Now the GUI takes over and manages the control flow. Any other command after this line will be applied after the GUI was closed.

Say Hello, Ruby

In the next example we want our GUI to do something interactively. Because it is more complex you may want to save it in a file "sayHello.rb".

If you are on a linux-based system, you can add on the top of the file a so called Shebang line. After giving the file execution rights with chmod +x sayHello.rb by using the shell, you can execute your program with a click on the icon in the file browser or in the command line with ./sayRuby.rb.

  1. !/usr/bin/ruby
  2. file: sayHello.rb

require 'Qt4'

class CustomApplication < Qt::Application

 slots :sayHello
 def sayHello
   msgBox = Qt::MessageBox.new
   msgBox.text = "Hello World"
   msgBox.icon = Qt::MessageBox::Information
   val = msgBox.exec()
   
   Qt::Application.instance.quit
 end

end

a = CustomApplication.new ARGV w = Qt::PushButton.new( "Say Hello, Ruby" ) Qt::Object.connect( w, SIGNAL( :clicked ), a, SLOT( :sayHello ) ) w.show a.exec

In the last example we connected the button with the existing slot :close. Now we want to create our own slot. We create a new class CustomApplication by inheriting from Qt::Application and add a slot :sayHello. It doesn't have any arguments. So we can use the shortcut instead of "sayHello()". After that we define a method with the same name and number of arguments. In the method a message box is prepared which get shown to the user with exec(). To define the properties of the message box, the binding specific syntax is used, which allows you to replace setText( "Hello World" ) with text = "Hello World". Remember this as you need it to find the class method in the C++ documentation of Qt.

With Qt::Application.instance.quit the program gets closed.

The last lines are nearly the same as in the last example. We have to replace Qt::Application with our own class CustomApplication and change the in the slot to :sayHello in the connection command.


Say Hello, Ruby - the short version

  1. !/usr/bin/ruby
  2. file: sayHello.rb

require 'Qt4'

a = Qt::Application.new ARGV w = Qt::PushButton.new( "Say Hello, Ruby" ) w.connect( SIGNAL( :clicked ) ) do

 msgBox = Qt::MessageBox.new
 msgBox.text = "Hello World"
 msgBox.icon = Qt::MessageBox::Information
 val = msgBox.exec()
 
 Qt::Application.instance.quit

end w.show a.exec

The bindings offer you a special features, which allows you to define the actions for a given signal without having to create a slot. Just use the connect method of the Qt object which owns the signal you want to use. The connect expects you to give only one argument,the signal, followd by a code block (do ... end), which gets processed in the case the signal is triggered. This way of programming allows a very compact style. In this case you don't need to create a CustomApplication.

Say Hello, Ruby - an even shorter version

require 'Qt4'

a = Qt::Application.new ARGV w = Qt::PushButton.new( "Hello Ruby" ) do

 self.connect( SIGNAL :clicked ) do 
   msgBox = Qt::MessageBox.new
   msgBox.text = "Hello World"
   msgBox.icon = Qt::MessageBox::Information
   val = msgBox.exec()
   
   Qt::Application.instance.quit
 end

end w.show a.exec

If you create a new object, you can add a code block with some statements, that gets executed in the namespace of the new object. You can expand the usage on the msgBox, too.

require 'Qt4'

a = Qt::Application.new ARGV w = Qt::PushButton.new( "Hello Ruby" ) do

 self.connect( SIGNAL :clicked ) do 
   msgBox = Qt::MessageBox.new do
     self.text = "Hello World"
     self.icon = Qt::MessageBox::Information
   end
   val = msgBox.exec()    
   Qt::Application.instance.quit
 end

end w.show a.exec


KDE® and the K Desktop Environment® logo are registered trademarks of KDE e.V.Legal